Used Uson Qualitek 620 Lecktester for sale (1,510)

Condition: as good as new (ex-display), functionality: fully functional, Hole size:20 x 20 mm Dwsdsh E Dc Nspfx Akmjc Thickness: 6 mm

Condition: used, Year of construction: 2005, charge load 620 Liter 1.700 mm tank diameter / tank height 1.550 / 600 mm 450 mm motor capacity 4,5 / 7,5 kW motor speeds: 900 / 1.485 U/min voltage 400 V total power requirement 8,5 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,00 x 1,70 x 1,50 m Soundproofing cover bracket 3,30 x 0,60 x 0,40 m Finishing machine - Serial-No.: 36225 / 05 - Machine ON: 6.469 h Dodowcg D Uepfx Akmjwc - Pneumatic separating flap - Timer - Pneumatic soundproof cover

Condition: used, functionality: fully functional, used battery 80 Volt type 4 PzS620 Dimensions: 1025 x 708 x 784 mm Refurbished in KW 19 / 2026 with test report Capacity test (C5 discharge test) Remaining capacity: 96% Ready for operation, filled and charged incl. cable and Euro 320 A connector incl. Aquamatik Other sizes (24V, 48V, 80V) available on request! Dsdsy Rfcljpfx Akmjwc

Condition: used, Year of construction: 2016, functionality: fully functional, conveyor belt length: 620 mm, conveyor belt width: 640 mm, conveyor belt speed: 600 mm/s, total length: 620 mm, total width: 700 mm, total height: 150 mm, overall weight: 15 kg, Manufacturer: Heber Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 620 x 700 x 150 Width including side frame in mm: 700 Width including drive unit in mm: 700 Side frame height in mm: 140 Conveyor length in mm: 620 Conveyor width in mm: 640 Belt type: Plastic, elastic Belt width in mm: 580 Support surface: Support rollers Roller pitch in mm: 160 Support roller shaft type: Steel – internal thread Support roller diameter in mm: 50 Number of idler rollers per shaft: 1 Idler roller material: Steel Dwsdpfx Akjzd Azpjmsc Drive: Roller drive – motorised roller Motor manufacturer: Interroll Motor specifications: EC310 Conveyor speed in m/s: 0.6 Net weight in kg: 15 Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 1990, max. counting speed sheets 2000 /min Dsdpfx Akey Tpmmomswc max. paper size 50 x 70 cm

Condition: used, functionality: fully functional, Year of construction: 1994, operating hours: 14,700 h, axle configuration: 4x4, power: 77.23 kW (105.00 HP), number of seats: 2, number of cylinders: 6, motor manufacturer: Perkins, gearing type: mechanical, Equipment: air conditioning, cabin, hydraulics, lighting, power assisted steering, rear power take-off, trailer coupling, front tires 100% worn, rear tires 50% worn, 3 mechanical distributors, air suspension seat, air conditioning, front ballast weights 15 x 45 kg, mechanical reverser. Dwjdpfxez I Tzrs Akmoc

Condition: used, Year of construction: 1998, charge load 620 liter Outer dia. of work tank 1695 mm tank length (expanded) 3800 mm width of working tank 430 mm speeds 900 - 1485 U/min voltage 400 V Dodpsw Hnr Iefx Akmewc total connected load 7,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Djdpjyuchrofx Akmjwc Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2023, Operating instructions Manual support leg Wide-angle PTO shaft type 3, / pick-up guide plate with roller hold-down device Height-adjustable drawbar Removable / feeler wheels Tires 620/40x 22.5 Baler with cutting unit Tandem axle Cutting unit / bale chute Dwodpfet Ebdfjx Akmec

Condition: used, Brand: GEMINIS Dwedpfx Aowznp Nekmsc Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Dwodpfsk Abpajx Akmjc Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, mileage: 582,000 km, power: 456 kW (619.99 HP), first registration: 08/2012, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 6x2, wheelbase: 6,650 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 10,550 mm, total width: 2,550 mm, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, spoiler, = Additional Options and Accessories = - Roof spoiler - Digital tachograph - Lifting axle - Refrigerator - Air suspension - Radio/CD player - Reversing camera - Sleeper cab - Sun visor = Further Information = General Information Cab: TOPLINE Technical Information Number of cylinders: 8 Engine displacement: 15,607 cc Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/55 R 22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 295/60 R 22.5; Double tires; Tire tread depth left inner: 45%; Tire tread depth left outer: 45%; Tire tread depth right inner: 45%; Tire tread depth right outer: 45%; Reduction: single reduction Rear axle 2: Tire size: 355/50 R 22.5; Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Weights Unladen weight: 11,940 kg Payload: 14,560 kg GVW: 26,500 kg Condition Damage: none Dwedpsz Ehnhefx Akmoc

Condition: used, Year of construction: 2012, Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide -Linear drive: stroke length 620 mm from Achterberg Toolbase AK -Actuator: DLG 060-068.01 -Threaded rod: Ø 12 x 615 mm -Number: 8x linear drive available Dsdeu Sv Tijpfx Akmewc -Price: per piece -Dimensions: 745/80/H80 mm -Weight: 1,7 kg/piece

Condition: used, Year of construction: 2007, operating hours: 361 h, lifting height: 6,100 mm, Year of manufacture: 2007 Drive: Wheel Empty weight: 1.860 kg Working height: 810 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Specification Details Manufacturer Skyjack Model SJ4620 (SJIII 4620) Year of Manufacture 2007 Machine Type Electric Scissor Lift Drive System 24V DC Electric Application Indoor use and level surfaces Certification CE Marked (European version) Performance Specification Details Maximum Working Height 8.10 m (26 ft 7 in) Maximum Platform Height 6.10 m (20 ft) Platform Capacity 590 kg (1,300 lb) Maximum Occupants 3 persons Gradeability 25% Travel Speed (Stowed) Approx. 2.9 km/h Travel Speed (Raised) Approx. 1.0 km/h Platform Specification Details Platform Length 2.13 m Platform Width 1.07 m Extension Deck Length 1.20 m Total Extended Platform Length Approx. 3.33 m Dimensions Specification Details Overall Length 2.31 m Overall Width 1.17 m Overall Height (Rails Up) 2.07 m Wheelbase Approx. 1.75 m Ground Clearance Approx. 0.10 m Weight Specification Details Machine Weight 1,860 kg Maximum Platform Load 590 kg Tires and Drive Specification Details Tire Type Solid Non-Marking Tires Tire Size 16 x 5 x 12 Drive Configuration 2-Wheel Drive Inside Turning Radius Approx. 0.71 m Outside Turning Radius Approx. 2.64 m Safety Features * Proportional controls * Emergency lowering system * Tilt alarm with drive cut-out * Pothole protection system * Automatic braking system * Overload protection * Dual holding valves on lift cylinders * Emergency stop controls at both platform and ground stations Electrical System Dwedpjz I Agwefx Akmec Specification Details Power Supply 24V DC Battery Pack 4 × 6V Deep-Cycle Batteries (configuration may vary) Charger On-board Automatic Battery Charger Transport Information Specification Details Transport Length 2.31 m Transport Width 1.17 m Transport Height 2.07 m Transport Weight 1,860 kg = More information = Please contact Bas Sindorf , ) for more information

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,227 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 3,300 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Load Center: 600 Dwedpezhycxjfx Akmjc ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Battery Voltage: 48V Battery Ah: 620Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Description: New inspection and accident prevention regulations Sideshift, 3rd valve, full free lift, safety light, joystick, single pedal, seat, single-pedal operation, FloorSpot rear and front, flashing light, multi-color display, joystick (multi-pilot), ISM module, battery can be regenerated upon request (for an additional charge).

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00670, load capacity: 150 kg, arm reach: 2,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6620-150/2.2 manufactured in 2014.02. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6620-150/2.2 Model Number: IRB Year of Manufacture Robot: 2014.02 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 2200 Repeatability (mm): ± 0.03 Dwodpfjz Nyf Usx Akmsc Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 880   Controller: IRC5 Year of Manufacture Cabinet: 2014.02 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -7 drawers: layout/height see photos, shelf can be opened at the top Doderb E Hiopfx Akmewc -lockable: without key -Dimensions: WTH 600/620/H960 mm -Weight: 105 kg

Condition: good (used), Warming cabinet, plate warmer, stainless steel warming cabinet -Manufacturer: GGG Gastro Großküchentechnik, stainless steel warming cabinet -Interior dimensions: 1225/620/H580 mm with adjustable intermediate shelf Dsdpfxjyvquqj Akmswc -Temperature range: 30°C and 90°C, continuously adjustable -Dimensions: 1400/730/H850 mm -Weight: 72 kg

Condition: used, Year of construction: 2019, operating hours: 1,520 h, Wacker Neuson ET16 mini excavator, manufactured in 2019, with only 1,520 operating hours! ---- * Manufacturer: Wacker Neuson * Type: ET16 * Year of manufacture: 2019 * Operating hours: approx. 1,520 * Operating weight: approx. 1,715 kg * Includes 3 buckets * Fully enclosed cabin * Adjustable undercarriage * Video available upon request Djdpfez Ncp Usx Akmjwc * Price: 13,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information provided without warranty; errors and prior sale reserved.

Condition: used, mileage: 597,593 km, power: 456 kW (619.99 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania infotainment CD radio * Auxiliary heating Dedpfx Aksvhvf Homjwc * Automatic air conditioning * Auxiliary air conditioning * 2 berths * Refrigerator ----* Cruise control * Hill start assist * Full air suspension * Lift axle 3rd axle * Sliding fifth wheel plate * Rear axle differential lock ----* Auxiliary headlights * Rotating beacons * Lamp bracket * Compressed air horns ----Internal vehicle number: 7979----Irrors and prior sale reserved

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Dedpfx Aez Ny Dkekmowc

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: Djdpfx Aelikvhokmjwc X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, Working mode: semiautomatic Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Dodpfx Aoydp Udokmewc Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: used, Stüer conveyor system Roller conveyors 16950-620-600 RA2456 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 16950 mm, 6 elements between 1700 and 4200 mm, Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Dwodpfsx U Hbksx Akmoc Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Stüer conveyor system Roller conveyors 15890-620-600 RA2457 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Djdpfsx U Hbqsx Akmjwc Conveyor length (NL): 15890 mm, 3 elements Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik