Used Vacuum Filtration System Frying Oil Fil for sale (46,677)

Condition: good (used), Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump Bedpfx Ahoctvqijmoln -Magnetic filter -for: hydraulic and other oils -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg

Year of construction: 2008, condition: good (used), Centralized dust, fume, and solid pollutant extraction system for industrial facilities. The VAC unit is an ideal choice for a high vacuum system for welding fume extraction and dust removal from grinding and polishing processes. Capacity: 1,500 m³/h at 20,000 Pa vacuum Max vacuum: 22,000 Pa Inlet diameter: 135 mm Motor power: 22 kW Includes FlexFilter DX filtration unit with ATEX explosion relief panel (the panel discharges pressure in the event of an explosion). Separation efficiency: approx. 99.95% (fine dust) Bljdpfx Aopug Dpehmsn Additional cartridge filters on the clean air outlet. Noise silencer. The device is equipped with a new set of filter bags.

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Bledpfozxr R Asx Ahmen

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  Bjdpfjyb Th Aox Ahmoln - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C

Condition: used, Year of construction: 1989, System for the secondary filtration of beer after the Kieselguhr filtration. Operating pressure: 10 bar Bljdpfx Asw Tmqbshmsn Operating temperature: 140 °C Volume: 169 l Length: 4,10 m Width: 1,30 m Height: 2,0 m Weight: 1700 kg Material: stainless steel Position: standing Base construction: Frame Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Bjdpfx Aszp E T Sehmsln Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Bljdpfjvnrz Dox Ahmsn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Bjdpfxsx Aqa Ds Ahmsln DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: ready for operation (used), functionality: fully functional, !!! We have a shipment of 11 pcs coming in. Price is for one pc only !!! Bjdpfswvluxsx Ahmeln Specially designed for rotary evaporators, distillation, filtration, vacuum ovens and vacuum drying. With chemical-resistant diaphragm vacuum pump and vacuum controller VCpro600. To ensure a freely selectable vacuum of ±1 mbar, the pump speed is continuously adapted to the gas load. Advantages: Faster process results are ensured by constant evaporation and degassing Automatic vacuum adjustment and control Controller with large, multilingual colour display and light/dark screen mode for optimum visibility Integrated solvent library with stored distillation-specific parameters and freely adjustable boiling points; storage of individual pressure curves for novel processes possible With communication interface for remote control/monitoring, for downloading logged process data and for software updates Low-noise operation through speed reduction Technical Information Type LVS 105 T-10 ef+ System LVS 105 T-10 ef+ Suction capacity (l/min) 18.0 End vacuum (abs.) 2,0 mbar Connection for hose inner Ø 8 mm Materials in contact with media pump head: PTFE with carbon fibre reinforcement diaphragms: elastomer with PTFE coating valves: PEEK seals: EPDM screw fittings/connecting elements: PP, PVDF vacuum hose: PTFE Port RS 232, LAN W x D x H 250 x 260 x 435 mm Weight 9,5 kg Mains connection 115-240 V, 50/60 Hz Good working condition. Please check our our other listings as well.

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Bledpfew Hxgvjx Ahmjn Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: good (used), AZO vacuum pneumatic conveying system Blsdpfxewyfyis Ahmon Pneumatic conveying systems for granular, powdery, and lumpy bulk materials Vacuum filter hopper with DMN150 dosing airlock Separator with DMN200 dosing airlock Vacuum pump 3kW 2860 rpm -260 270 mbar Pipework 50mm and 80mm See our other listings VMA Wekerom

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS Bjdpfx Ahszxwxxsmjln The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: Blsdpfeq Nw Uqex Ahmon 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 4.000mm nett belt width 600 mm adjustable speed sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 6.000 x 2.200 x 2.200 mm with oil circulation pump Full mechanical overhauling: New screen filter for internal oil filtration New bearings, chains, seals, slide bushings, gears, … Bodpfxez Dvc Ro Ahmjln Motors/gearboxes completely overhauled or new replaced Oil bath fully re-insulated New grill belts, standard dimensions for snack products (to be discussed depending on product and customer specifications) All wear-sensitive parts replaced or fully refurbished General cleaning, overhaul, and structural inspection Full electrical overhauling + update of electrical cabinet and control: All electrical components and cables replaced OEM TST PLC control system or conventional push-button control system with Jumo PID temperature controller New electrical diagrams (E-Plan) New sensors Component and cable coding

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PRTC-1500C, total length: 2,800 mm, total width: 1,050 mm, total height: 1,650 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 6 kW (8.16 HP), 45 m³ vacuum pump 2 HP cooling system KR373 geared motor 7'' HNC operator panel PLC control Complete stainless steel housing 1050x2800x1650 mm Blodoydlk Uspfx Ahmon 950 kg

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Bjdpfsz E N Tlox Ahmeln Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Bledpjv Si Szjfx Ahmen Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, OLEA: ANTI-RUST OILING SYSTEMS, made by EUROMAQUINA Single piece or bundle water-repellent oiling. Complete bundle oiling system. 1. Flow control Optimum for every diameter and production speed Bljdpowq Nghefx Ahmsn 2. Plug & Play Installation and commissioning in a few hours 3. Quick change Nozzle adjustment always from the outside for the whole range 4. Minimal consumption Air-oil spraying to reduce consumption by up to 75% 5. Low pressure micro spraying No mist in suspension Uniform adhesion on the tube surface 6. Adaptable design Designed to easily adapt to any line and customer need 7. Compact Only needs 250mm of free space in the line With position adjustment system by means of a diaphragm With this system, we can adjust the position of the nozzles from the outside, without having to open the rack or replace it and at the same time adjust the size of the opening to limit the possible oil leakage to a minimum. No oil suction system or collection tray with filter is required. Flow control: Optimum for every diameter and production speed Plug & Play: Installation and commissioning in a few hours Quick change: Nozzle adjustment always from the outside for the whole range Minimal consumption: Air-oil spraying to reduce consumption by up to 75% Low pressure micro spraying: No mist in suspension & uniform adhesion on the tube surface Adaptable design: Designed to easily adapt to any line and customer need Compact: Only needs 250mm of free space in the line

Condition: used, AZO vacuum system with dosing screw Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Year of manufacture: 2004 Equipped with quick cleaning system on dosing screw Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings Blodeygh Emopfx Ahmjn VMA Wekerom

Condition: used, This listing is for a Tecan SPE Te-VacS-B Vacuum System. The unit is in full working condition and is ready for immediate release. The Tecan SPE Te-VacS-B is an advanced vacuum regulation module designed to streamline and automate cartridge-based filtration and SPE processes, enhancing laboratory efficiency and accuracy. Key Features: Automation: The system automates the entire process of cartridge-based filtration and SPE, reducing manual intervention and improving reproducibility. Software-Controlled Vacuum Regulation: Provides precise control over the vacuum levels through user-friendly software, allowing for adjustments tailored to specific applications or samples. Compatibility with Tecan Platforms: Designed to seamlessly integrate with Tecan pipetting platforms, enhancing existing workflows within the Tecan ecosystem. Versatile Integration: Offers enhanced flexibility by being compatible with non-Tecan vacuum separation manifolds, external vacuum pumps, or house vacuum systems, making it adaptable to various laboratory setups. Bljdexxy Sbspfx Ahmen Dual Vacuum Positions: Equipped with two separate vacuum positions and distinct vent lines for each channel, effectively preventing aerosol cross-contamination between samples, which is critical for maintaining sample integrity. Benefits: Increased Efficiency: Automating the SPE processes decreases the time and effort required for sample preparation, allowing researchers to focus on data analysis rather than manual tasks. Enhanced Reproducibility: With software control and precise vacuum regulation, the system ensures consistent performance across multiple runs, vital for high-quality results. Flexible Implementation: The ability to work with various vacuum sources and platforms makes it a versatile addition to any laboratory, accommodating different workflows and instruments.

Condition: good (used), functionality: fully functional, Year of construction: 2014, Crane system with electric crane trolley, chain hoist, and vacuum device – complete. Crane rails GISKB II, length 9 meters Crane bridge HEA120, length 4400 mm Electric crane trolley GIS Chain hoist GIS GP500/1, 0.5 t, hook height approx. 5 m Bljdpfexp Nycsx Ahmon Vacuum device DEVO-Tech, D-TB-300.03, payload 300 kg Dismantled

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. Bjdpezd Unbjfx Ahmoln This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Bsdpfx Aozlbqrehmjln Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. Bledpfx Ahsznibwomjn The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Wieland SN-2000 U Industrial Vacuum Cleaner Wet Vacuum Manufacturer: Wieland Model: SN-2000 U 2860 rpm Weight: 106 kg Power: 2.2 kW You are welcome to arrange an inspection visit. Bedpfx Ahexxibxomeln We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications as well as errors in the description may occur and are reserved.