Used Vc 999 07S for sale (1,477)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Gijdpfjy Ti E Nox Ahzsw Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: like new (used), GSH 11VC Professional Rotary Hammer - Weight: 11.4 kg - Absolutely as new - Comes with 3 new chisels - 1700 watts - SDS max - Year of manufacture: 2018 Was placed in a service vehicle. Gijdpfx Aoy R U Nbshzow

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Gsdpov D Ip Njfx Ahzjiw Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Year of construction: 2003, condition: good (used), machine/vehicle number: FA/07/RE/1612/3, For sale: Complete industrial extraction system consisting of 6 Colt Coltair roof fans, including the corresponding control cabinet/central control unit. Gedpfjy Hw Avox Ahzsiw This system was used for ventilation and extraction in a warehouse measuring approximately 90 x 25 x 12 meters and has been decommissioned in working condition. The entire set has been professionally dismantled and is preferably sold as a whole. The fans are suitable for, among other things: - Welding fume extraction - Fume extraction - Ventilation of workshops and warehouses - General industrial air exchange Technical data per fan Brand: Colt International Ltd Product: Coltair Fan Unit Type: FA/07/RE/1612/3 Power supply: 400V Motor: 3-phase Output: 0.60 / 0.40 kW Speed: 900 / 650 rpm Capacity: 3.62 / 2.85 m³/s Converted per fan: approx. 13,032 / 10,260 m³/h Total capacity for the complete set Approx. 78,192 m³/h on high setting Approx. 61,560 m³/h on low setting What is included: - 6 roof fans - Complete control cabinet / control unit - Used, well-maintained industrial set - Professionally dismantled in working order Inspection possible by appointment. Loading on site by arrangement. Relevant keywords roof fan, extraction fan, industrial ventilation, welding fume extraction, warehouse ventilation, extraction system, 400V fan, Colt Coltair, roof extraction, industrial extraction set

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details. Godsy Ncyfopfx Ahzjiw • Table size: 900 x 430 mm Additional equipment • On-board tool presetter • Through-spindle coolant (refrigerant inside the spindle)

Condition: used, functionality: fully functional, very robust gearbox, motor 1.0 / 1.8 kW Saw blades: 360 mm Gjdpey Iv Hijfx Ahzoiw Slow-running model with 6 cutting speeds: 8 / 10 / 12.5 m/min 16 / 20 / 25 m/min Test cutting at our facility with the following specifications: Cutting capacity at 90 degrees with blade size 360 mm: Round profile: 110 mm Solid round material: 80 mm Flat profile: 200 x 80 mm Weight approx. 560 kg

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Gsdjymc Ngspfx Ahzsiw Weight: 13500kg

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Giodpfx Ahowhx I Njzsw Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property Gisdpfx Asyc Ewxohzsw - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: ready for operation (used), Year of construction: 2012, Technical data: Product number: V-VC 75 Year of manufacture: 2012 Motor power: 2.2 kW Capacity: 84 m³/h MAX vacuum: 0.2 mbar Noise level: 74 dB Rotational speed: 1500 rpm Weight: 90 kg Dimensions [H x L x W]: 6011 x 281 x 310 mm The pump achieves a vacuum of 0.2 mbar, as confirmed by the sensor measurement shown in the attached video below. A display reading of 2.8 -1 on the sensor means a vacuum of 2.8 x 10⁻¹, which equals 0.28 mbar. After full overhaul/major service The pump is in perfect condition - New oil - New exhaust separators Oil-lubricated vacuum pump, suction unit – a device used in vacuum technology for removing gases (creating a vacuum) in a closed space. Pumps are classified based on their operating principle as: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: - Ultimate pressure (lowest pressure the pump can achieve), - Pumping speed and its dependency on pressure, Giedpfxsy H Swno Ahzew - Capacity (usually measured in m³ of evacuated gas per unit of time).

Condition: good (used), Year of construction: 2011, We are pleased to present for Sale the Vent cutter VC-16 RS from Stork. Brand Stork Model VC-16 RS Gijdpfx Aor Igq Tohzow Year 2011

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,800 mm, total width: 2,100 mm, table load: 1,000 kg, overall weight: 6,800 kg, spindle speed (max.): 10,000 rpm, tool weight: 7,000 g, product length (max.): 2,900 mm, number of axes: 3, This 3-axis TBI VC 1060 HH was manufactured in 2020. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 500 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the TBI VC 1060 HH vertical machining centre we have for sale. Contact us for further details. • Rigid tapping (no compensation holder required) • Manual handwheel • Table size: 1100 × 500 mm • Distance spindle to table: 150–800 mm • Through-spindle coolant: 20 bar • Coolant tank capacity: 330 l; flow: 200 l/min • Rapid traverse (X/Y/Z): 36 / 36 / 36 m/min • Positioning accuracy: ±0.005 mm • Repeatability: ±0.003 mm • Linear guideways X/Y/Z (roller type) • Telescopic covers for X/Y/Z axes • Pneumatic counterbalance on Z-axis • Digital axis drives • Tool magazine: 24 positions (SK40), double arm • Max tool diameter: 80 mm; max tool length: 300 mm • Tool change time: 1.5 s (fast double-arm tool changer) • Spindle temperature stabilization • Spindle air purge system • Tool cooling: air and coolant • Central lubrication system • Electrical cabinet cooling • Data interface: V.24 / RS232-C / USB • Chip flushing system (bottom) • Total power: 35 kVA Additional equipment • Integrated chip conveyor with bin Giedoyyxqhjpfx Ahzow • Oil skimmer Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2004, Working travels 2000 x 550 x 560 mm Godpfxerrf Svo Ahzeiw Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 32 Pos. FANUC 18i control Tool breakage control device Tool length measuring device Partition for pendulum operation Chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2015, Heidenhain TNC 620 V2 control system Travel X/Y/Z: 760/480/480 mm Speed: 12,000 rpm Giedjv Rr Hxspfx Ahzsw Tool magazine for 24 SK40 tools Table size: 900 x 410 mm Chip conveyor Automation / Robot

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details. • Working area: 3000 mm (length) x 1500 mm (width) • Machine structure: Heavy steel frame construction; portal gantry design • Material support: Sectional support bed • Plasma cutting unit: Kjellberg HiFocus 280i Giedpfx Asyu Th Aehzsw • Max plasma thickness: up to approx. 70 mm • Cutting capacity (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm • Cutting speed range: approx. 0–5200 mm/min • Positioning speed: approx. 12,000 mm/min • Positioning accuracy: ±0.1 mm • Control system: VACAM CNC control • Software: VACAM Machine Edition; VACAD; VANEST • Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet connection; touchscreen monitor; keyboard; USB ports • Automatic torch height control: HT4000 PCS • Laser pointer: Yes • Electrical connection: 230 V, 1 phase, 50 Hz • Compressed air requirement: Operating pressure approx. 6 bar • Noise level (idle): approx. 70 dB • Safety equipment: Emergency stop buttons; emergency stop cable; protective safety systems • Material types: Steel; structural steel; sheet metal Additional equipment • TEKA Filtercube 4H extraction unit (filter system)

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Power: 30KW Gjdswy Nhqopfx Ahzjiw New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) Giedpfxeykt T De Ahzjw • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: MAJ5117A, controller model: FANUC F31i-B5, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, The machine was in use until it was decommissioned in 2024. The cab door and the 5th axis are not functioning properly. The fault has not been further diagnosed. The original purchase price of the machine was EUR 265,000! TECHNICAL DETAILS Gisdpfx Aheymbz Iszsw Spindle speed: 12,000 rpm Tool holder: BT40 BigPlus Tool positions: 60 MACHINE DETAILS Control: FANUC F31i-B5 Coolant pressure (IKZ): 70 bar EQUIPMENT: IKZ 5 axes with chuck

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Gijdpoyma H Njfx Ahzow Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

Year of construction: 2016, condition: used, Manufacturer : STAES Model : VC HICA Type : Process tank Year: 2016 Circulation / mixing pump : SPX W+ 50/8 160 STD Material : stainless steel Tank / Vessel Volume: 200 L Operating pressure: Atmospheric Giedpfx Ahsykcayezjw Temperature : -10 °C to +100 °C   Jacketed Volume : 5,6 L Operating pressure : 0 / 3 bar Temperature : -10 °C to +100 °C jacket pressure drop : 0,2 bar

Condition: excellent (used), Vötsch VC 0150 Climatic Test Chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climatic Test Chamber Voltage: 230 V Rated Power: 1.5 kW Voltage: 1540 liters Temperature Range: 0°C to +90°C Humidity: 10% to 98% Godpeuuikfofx Ahzjiw Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor Controller List Price: €19,500 KK-09 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m Godpfxju I E Emj Ahzoiw

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Gijdpfx Ahjv Extzozsw

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Giodpfx Ahoycwtfjzow

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Gisdpfxjxwn I Uo Ahzsw