Used Viber-System Alu 500 for sale (46,196)

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Dkjdpfxsyx Hpie Ad Nol Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: used, mileage: 586,000 km, power: 368 kW (500.34 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 7,389 kg, maximum load weight: 11,536 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 02/2027, fuel consumption (urban): 596 l/100km, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, total length: 5,960 mm, Year of construction: 2023, number of seats: 2, lifting height: 2,600 mm, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Color: White, Curb weight: 7389 kg, Gross vehicle weight: 18,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, Seats: Velour, Velour black, Interior color: Grey, Leaf-air suspension, Retarder, Digital tachograph, Fifth wheel coupling: JOST JSK37C-W 150, -660 mm, Electronic Braking System (EBS), Electronic Stability Program (ESP), Automatic climate control, Adaptive Cruise Control (ACC), LED headlights, Automatic driving lights, Headlight range adjustment, Bluetooth hands-free preparation, Rain sensor, Adjustable steering column, Roof hatch, Fog lights, Electrically adjustable and heated exterior mirrors, Heated curb mirror, Wide-angle mirror, Immobilizer, Cool box, Axle load indicator, Hill start assist, LED daytime running lights, 1x15-pin connection socket, Sail function, Telematics system, EGR, SCR lightweight ADR FL, Alloy wheels, Satnav, Storage box, Fire extinguisher, Non-binding offer, subject to errors and prior sale. Images may not correspond to the actual offer. Dodpfxeyx Rm Ej Ad Nokl

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Dedeh Hp Dtjpfx Ad Njkl Year 2011. Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: grey, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40816 Krone, S 24 * Year of manufacture: 2012 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Tail lift * Alloy wheels Dkjdpeyunzqjfx Ad Njl * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duo-matic air coupling * 15-pin plug connector * Lifting and lowering device * Rear support legs * Inspection valid until 08/2026 (HU/AU) * Suspension type: Air * Gross weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Authorised gross weight: 18,000 kg * Axle manufacturer: BPW * Tyre condition 1st axle: 20% / 20% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 30% / 40% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Internal dimensions: L = 7,700 mm, W = 2,500 mm, H = 2,300 mm * Internal volume*: 44 m³ * Pallet spaces: 19 * Trailer manufacturer: Krone * Body: Ewers swing wall body * Tail lift: BÄR BC 2500, lifting capacity 2,500 kg Disclaimer: Subject to changes, prior sale, and errors. You will find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing solutions * Application for all (export) documentation * Arranging export / customs plates * Vehicle reconditioning: new tarpaulins, lettering, repainting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Contact our trained specialist staff – we are happy to advise you.

Condition: used, empty load weight: 5,500 kg, maximum load weight: 12,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2012, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: grey, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40818 Krone, S 24 * Year of manufacture: 2012 * ABS, anti-lock braking system * EBS, electronic braking system * Tail lift * Alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air connection * 15-pin connector plug * Lift and lowering device * Rear support * Suspension: air * Gross weight: 18,000 kg * Unladen weight: 5,500 kg * Payload: 12,500 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7700 mm, W=2500 mm, H=2300 mm * Internal volume*: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers swing-wall trailer * Tail lift: BÄR BC 2500, lifting capacity 2500 kg Liability disclaimer: Subject to changes, prior sale, and errors excepted. More pictures and videos are available on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Processing of all (export) documents * Order export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service Dkjdpfsyunzwjx Ad Njl * Transfer of commercial vehicles Please contact our trained specialists – we are happy to advise you.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, Equipment: ABS, Langendorf tipper First registration: 03/2019 Unladen weight: 5,000 kg Lifting axle Aluminium body German vehicle, single-owner ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/Polish/Czech..... Roman We are happy to assist you with financing or leasing. Dksdpfx Adeyiw S Uj Nol EU sales: net, upon presentation of company documents and VAT number VAT deposit: €2,000 Our service for you: - Export license plates - Export papers and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau railway station

Condition: used, mileage: 575,300 km, power: 368 kW (500.34 HP), first registration: 09/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Scania R500 Retarder, black leather interior, alloy wheels, lane assist, adaptive cruise control, parking air conditioning and parking heater, radio with navigation system and Bluetooth, spoiler, cooler box, glass roof hatch, LED headlights, exterior sun visor, differential lock, multifunction steering wheel, air horns, EURO 6D, rain sensor, light sensor, 2x electric windows, electric mirrors, ABS. Empty weight: 7,995 kg Payload: 10,005 kg Front axle: LEAF SPRING SUSPENSION Dodpfxjyuq Rzs Ad Nokl Rear axle: AIR SUSPENSION Wheelbase: 3,750 mm

Condition: used, mileage: 194,329 km, power: 375 kW (509.86 HP), first registration: 09/2023, fuel type: diesel, empty load weight: 8,048 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 315/60 R22.5, rear tire size: 295/60 R22.5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, compressed air brake, cruise control, differential lock, onboard computer, parking heater, truck registration, Volvo FH 500 | Leather steering wheel | EURO6 | Refrigerator | Hands-free system, multifunction steering wheel | Auxiliary heater, seat heating | Electric windows, electrically adjustable and heated mirrors | Parking air conditioning | CB radio, Radio/CD | Subject to errors, input mistakes, and prior sale. Dedpfx Adjyu U T Tj Nekl

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Dedpjyrqpfefx Ad Nekl Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Dodjyugctjpfx Ad Nskl Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines Dsdpfx Aeyugalsd Nskl The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 04/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40821 Krone, S 24 * Year of manufacture: 2012 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Tail lift * Alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air connection * 15-pin connector * Lifting and lowering device * Rear support * Inspections: Main inspection (HU) / Emissions inspection (AU) valid until 04.2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Permitted gross weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7700 mm, W=2500 mm, H=2300 mm * Internal volume: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers curtain-sider with swinging wall * Tail lift: BÄR BC 2500, lifting capacity 2500 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our extensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options Dedpsynvybsfx Ad Nskl * Assistance with all (export) documentation * Order and provision of export / customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport/logistics services for commercial vehicles Our trained staff will be happy to advise you.

Condition: used, mileage: 225,615 km, power: 162 kW (220.26 HP), first registration: 10/2000, tire size: 265/70/r19,5, axle configuration: 4x2, wheelbase: 3,300 mm, color: white, gearing type: mechanical, suspension: steel, loading space volume: 10 m³, Year of construction: 2000, Equipment: electric window regulation, General information Applicable material: Fuel Technical information Number of cylinders: 6 Drivetrain Drive: Wheel Make of engine: Renault Dodpoymd Htefx Ad Nokl Axle configuration Tyre size: 265/70/r19,5 Suspension: leaf suspension Rear axle: Double wheels Weights Empty weight: 5.580 kg Carrying capacity: 8.420 kg GVW: 14.000 kg Functional Make of bodywork: MERCERAN Number of compartments: 4 = Additional options and accessories = - PTO

Condition: used, Year of construction: 2014, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm Dodpfx Adoymx Tbe Nekl - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,090 mm, loading space width: 2,060 mm, loading space height: 2,060 mm, loading space volume: 22.5 m³, color: black, construction height: 2,420 mm, working width: 2,320 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, incl. aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100km/h / tailgate hinged door Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3.500kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 509 x 206 x 206 cm (L x W x H) - Overall exterior dimensions: 622 x 232 x 242 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 1000kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Lockable front right side door, approx. 127x60cm - Full poly roof and front - Rear load-through dimension: approx. 178x181 cm (W x H) - Inside width between the wheel arches: approx. 193 cm (W x H) - Drive-on flap made of aluminum with optional lock lockable - Drive-on flap as flap / door system (can be used as flap or door) - Reinforced substructure for drive-on flap - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Stable cross members thus high point load - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slotted-hole rails for lashing straps & locking beams - bar strip with rubber coating for lashing straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Dksdou Htntepfx Ad Nsl

Condition: new, empty load weight: 625 kg, maximum load weight: 1,375 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: black, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100km/h / tailgate hinged door Body color: black Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,000 kg - Unladen weight: 625 kg - Payload: 1,375 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Continuous interior height: approx. 188cm - Continuous interior width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for tensioning straps & locking beams - Rod strip with rubber coating for tensioning straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Dkodpfxsu Htffo Ad Njl

Condition: new, empty load weight: 625 kg, maximum load weight: 1,375 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: blue, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100km/h / tailgate hinged door Body color: blue Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,000 kg - Unladen weight: 625 kg - Payload: 1,375 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: 6 pcs. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Continuous interior height: approx. 188cm - Continuous interior width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for tensioning straps & locking beams - Rod strip with rubber coating for tensioning straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Dkjdpsu Htd Uofx Ad Nol

Condition: new, empty load weight: 1,101 kg, maximum load weight: 2,399 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 1,790 mm, loading space height: 190 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,450 mm, working width: 2,380 mm, Hydraulics, automatic reverse drive, NEW MODEL incl. 150cm long drive-on ramp, hot-dip galvanizing, parabolic suspension, aluminium floor, *immediately available * NEW MODEL incl. 150cm long drive-on ramp, parabolic suspension, aluminium floor 150cm long drive-on ramp, parabolic suspension, aluminum floor TECHNICAL DATA - Make: Hapert Trailers - Model: Indigo LF-3 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 405 x 179 x 19 cm - External dimensions (LxWxH): 589 x 238 x 145 cm - Loading height of floor: 42 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,101 kg - Payload: 2,399 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic suspension + 100 km/h - Support wheel: Yes, automatic - 100 km/h approval: YES EQUIPMENT: - Brake: Yes - Number of axles: 3 - Floor: Aluminum floor - Drop sides: Steel drop sides - Drop side height: 19 cm - Locks: Eccentric locks - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Spare wheel: Optional, can be retrofitted - Bucket storage: Optional, can be retrofitted - Superstructures / attachments: Optional, attachable - Ramp chute: No - Ramps/ramp flap: Yes - Type of ramp: Continuous tailgate - Load ramps: - - Drive-on angle: approx. 20 - Supports: Integrated in tailgate - Lashing eyes: 10 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents DESCRIPTION - 3x parabolic spring axle each 1. hot-dip galvanized - steel drive-on flap standing on shaft 150cm - sturdy eccentric locks - corner stanchions with locks for tailgate can be removed without tools - insertion option at all 4 corners for tarpaulin frames, grid attachment, robust support feet on the drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - optionally with bucket tray - 10x lashing eyelets recessed into the side of the frame profile (1000dAN/kg) TÜV certified - perforated rail on three sides 6cm (Combi Protect Rail) can also be used with locking bars and lashing straps - round holes 25mm, Slotted holes 54x25mm - Parabolic spring axle from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar REINFORCED - 13-pin plug - Return travel license plug - reversing lights - large safety lights - rear lane departure lights - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved. Dedpfx Adju Hrl Ro Nekl

Condition: new, empty load weight: 625 kg, maximum load weight: 1,975 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: black, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * with gross vehicle weight: 2600kg incl. aluminium body / side door / 100km/h / tailgate hinged door Body color: black Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,600 kg - Unladen weight: 625 kg - Payload: 1,975 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: 6 pcs. Frame/chassis: Welded, hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof - Interior continuous height: approx. 188cm - Interior continuous width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking bars - Rod strip with rubber coating for lashing straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Dsdpfx Adju Htf Ee Nokl

Condition: new, incl. aluminium floor / ramp compartment with ramps / many lashing points / manual hand winch Technical Data: • Brand: Martz • Model: GT PLATEAU 500 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 507 x 211 x 0 cm • External dimensions (LxWxH): 657 x 215 x 97 cm • Perm. total weight: 3,500 kg • Unladen weight: 764 kg • Payload: 2,736 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Aluminium profile floor • incl. manual hand winch with brake • Loading ramp compartment underneath deck • 2x steel ramps for loading • Aluminium side walls can be retrofitted at any time • Insert sleeves at all 4 corners for tarp bows, mesh extension, side wall extensions, or raised front panel • Very robust welded steel frame • Frame fully hot-dip galvanised by immersion • Very low chassis for a minimal approach angle • Numerous continuous cross-members welded in for high point load capacity • 10x recessed lashing rings in side frame profile (600dAN/kg) certified • Automatic reverse mechanism • KNOTT overrun clutch and parking brake • Reinforced, very stable V-drawbar • 13-pin plug • Reverse lights • Large, heavy-duty safety lighting • Integrated rear fog light • Rear frame lighting recess-mounted • Rear LED side marker lights • Automatic jockey wheel Optional accessories – available on request: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels Dksdpfsx Tbitsx Ad Nsl • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • and more. Brand new vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or transport plates (Germany) can be provided. - Export plates incl. customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialists and a repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted -

Condition: new, empty load weight: 625 kg, maximum load weight: 1,375 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: white, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse, hot-dip galvanized, unbraked, aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100km/h / tailgate hinged door Body color: white Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,000 kg - Unladen weight: 625 kg - Payload: 1,375 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Continuous interior height: approx. 188cm - Continuous interior width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-hole rails for tensioning straps & locking beams - Rod strip with rubber coating for tensioning straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Djdpeu Htflefx Ad Nskl

Condition: new, empty load weight: 625 kg, maximum load weight: 1,375 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: green, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse, hot-dip galvanized, unbraked, aluminium body / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100 km/h / tailgate hinged door Body color: green Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,000 kg - Unladen weight: 625 kg - Payload: 1,375 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Continuous interior height: approx. 188cm - Continuous interior width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-hole rails for tensioning straps & locking beams - Rod strip with rubber coating for tensioning straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Dksdpfx Adeu Htfrj Nol

Condition: used, Year of construction: 2010, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm Dsdpfx Adjx Ir Ens Nokl - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 1998, condition: ready for operation (used), A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible. Djdpfsvx Tw Usx Ad Nskl

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS Dkjdpfsuc Unqex Ad Nel 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg