Used Weingarten Xlv Ii for sale (1,994)

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min Dedpstqm Dmsfx Aqcech ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Djdou Rwa Ijpfx Aqcsch Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Further data and pictures on request Dedpfxjrm Ntpe Aqcjch the press is currently not functional and must be mechanically and electrically overhauled

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Djdpfx Aqoxtff Aococh

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering Dedpjxxrhnjfx Aqcoch General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: used, Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press Dedpsd Nzg Rjfx Aqcoch -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm Dsdpelp U D Eofx Aqcoch hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm Dcsdpslp U Ddofx Aqcoh hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm no. of strokes 56/84 Hub/min Djdpslp U Emjfx Aqcjch ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. 1200x1900x2800 mm

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m Dedpfx Aoxh Swhoqcsch

Year of construction: 1962, condition: used, pressure 10 t throat 170 mm stroke 6-60 mm no. of strokes 160 Hub/min ram - range of adjustment 40 mm table surface area 420x320 mm ram surface 180x140 mm hole in the table Ø 120 mm Dedpfx Aolp U Nbjqcsch table height 850 mm tool hole in ram Ø 32 mm weight of the machine ca. 1 t dimensions of the machine ca. 1200x1200x1900 mm

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm Dedpfx Aelp U Dasqcech ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 1600x2200x3000 m

Year of construction: 1984, condition: used, pressure 63 t throat 320 mm stroke 8-100 mm no. of strokes 120 Hub/min ram - range of adjustment 63 mm table surface area 730x600 mm ram surface 540x360 mm table height 850 mm tool hole in ram Ø40 mm weight of the machine ca. 5,5 t Dcedep Sycpjpfx Aqcoh dimensions of the machine ca. BxTxH 2000x2000x3000 mm

Year of construction: 1958, condition: used, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes 45 Hub/min ram - range of adjustment 100 mm table surface area 800x620 mm ram surface 500x400 mm Dodpfolp U Ebsx Aqcjch hole in the table Ø 360 mm tool hole in ram Ø 50 mm weight of the machine ca. 12 t dimensions of the machine ca. 2200x2000x3600 mm

Year of construction: 1970, condition: used, pressure 100 t throat 415 mm Djdpfxolp U Spo Aqcjch stroke 8-140 mm no. of strokes 48 Hub/min ram - range of adjustment 80 mm table surface area 920x670 mm ram surface 700x450 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 1500x2000x2800 mm

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) Dcjdpfx Aqjx Ry Hrecoh 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Djdjqrqz Aepfx Aqcoch Safety distance: 128 mm

Condition: used, Year of construction: 1995, material width 650 mm coil weight 7,5 t material thickness 0,6 - 4,0 mm coil internal diameter 460 - 530 (630) mm coil external diameter 1300 mm material cross-cut 1300 mm² no. of straightening rolls 9 Dsdpfxov Ehaqo Aqcsch straightening roll diameter 60 mm speed 1 - 30 m/min power requirement 30,0 kW Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Dedpfxetu Hvwj Aqcoch Table opening: 450 mm diameter

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm Djdevuud Uspfx Aqcoch table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: used, Technical details: Total force (nominal): 1000 to Dcodpfxex Ag Azj Aqcjh Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Djdsx Ag Epopfx Aqcjch Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax

Condition: defective spare-parts repository (used), Year of construction: 1974, machine/vehicle number: 121645, functionality: not functional, pressing force: 63 t, table width: 650 mm, table height: 910 mm, overall weight: 4,000 kg, space requirement height: 2,800 mm, space requirement length: 1,200 mm, space requirement width: 1,900 mm, stroke adjustment: 63 mm, The eccentric press has a clutch defect and is currently non-operational. Dcsdpfxex D Tngj Aqcjh Without the column stand mounted in the pictures.

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Dedpfxjt Hwz Nj Aqcoch Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode Dcedpfx Asfx Hv Hjqceh selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories