Used Weingarten Xrr Iii Sp for sale (11,030)

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Bedov T Aqyjpfx Ablewr Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Bwsdsxzynuopfx Abler

Condition: ready for operation (used), functionality: fully functional, Offer without Obligation LAMINATOR Bedpfozrlu Iox Ablowr EUROLAM III-IDH 540 G10P Bogengröße / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstärke / Substrate Thickness 120-350g/㎡ Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150℃ Power Consumption 12kW - machine is in perfect running condition. Price under request Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW Bsdpfezrprdjx Ablewr weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm Bwedpfjzrpqmjx Ablor table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm Bedpfozrpqgox Ablowr passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm Bwsdpfxjzrpp Nj Abljr no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m Bjdpfxezrpppj Ablowr with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Condition: excellent (used), Eccentric press Bwjdezpbviepfx Abljr Inventory no. 3919 Manufacturer: Weingarten Type: XOR 2 Press force: 75 tons * Stroke adjustment: 10 to 100 mm * Adjustable ram: 60 mm * Installation height: 360 mm * Overhang: 270 mm * Table area: 630 x 600 mm * Foot-operated * Machine weight: approx. 4500 kg In very good condition.

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Bsdszqzd Nspfx Ablswr

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Bsdpfxezqzcre Ablewr

Year of construction: 2003, condition: used, machine/vehicle number: M00543, Rated force: 2,500 kN, rated power: 18.5 kW, machine weight: 25,000 kg, stroke rates in continuous operation: 19-57/min, max. stroke rates in single-stroke operation: 35/min, dwell time: 0.245 s, stroke length: 19-250 mm, max. installation space: approx. 480 mm, table size: approx. 900x1,200 mm, upstream light curtain, two-hand operation, separate control panel, control unit BEUTLER DATAPLUS 200. Bodpfx Aezqzc Soblowr

Year of construction: 1969, condition: ready for operation (used), A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of manufacture: 2004, max. press force: 6300kN, slide stroke: 240mm, strokes: 40/min, max. slide adjustment: 100mm, max. shut height: 525mm, table dimensions X/Y: 1200mm/1500mm, slide dimensions X/Y: 1050mm/1100mm, main motor power: 110kW, weight: approx. 110t. 3) Decoiler Roland Dreher 2398 G-SP, year of manufacture: 2004, max. load capacity: 25500kg, max. strip width: 1050mm, coil inner diameter range: 475mm-615mm, max. coil outer diameter: 2000mm. 4) Straightening feeder Roland Dreher 1689 G-SP, year of manufacture: 2004, strip width range: 100mm-1050mm, max. strip thickness: 12.4mm, max. strip cross-section: 6000mm², straightening rolls: 6, straightening roll diameter: 100mm, infeed and outfeed rolls: 4, diameter: 140mm, max. feed speed: 50m/min, feed accuracy: 0.1mm, transverse travel: +/-400mm. 5) Transfer feeder Roland Dreher 700/160/50, year of manufacture: 1994, feed length: 700mm, closing stroke: 160mm, lifting stroke range: 0mm-50mm, max. rail spacing: 1190mm, strokes: 24/min. 6) Central component oiling and processing system Leblein, control system: Siemens S7-300. 7) Line control system and electrical cabinet Siemens S7-317 with two decentralized Siemens ET200M units, modernization year: 2011. Including additional peripheral equipment such as feeding, marking, hydraulics, conveying, etc. Documentation available. An on-site inspection is possible. Bwsdpfx Aozl U H Tebljr

Condition: used, Pressure: 200 t Bjdpfx As Dvi Uoblewr Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Height: 3000 mms Width: 1000 mms Length: 2750 mms Weight: 14000kgr New electric system

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. Bjdpfxot Hwz Ne Ablowr * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0630, type of input current: three-phase, input voltage: 400 V, coil weight: 6,000 kg, overall weight: 12,000 kg, Machine available immediately. Bedpfszl A I Sjx Ablswr We are offering a new TR32 trapezoidal roll forming machine. The machine is new and ready for collection. Type: TR32 Year of Manufacture: 2026 Serial Number: 0630 Weight: 12,000 kg Maximum power: 12 kW Supply voltage: 3x400 V Supply frequency: (50–60) Hz THE MACHINE INCLUDES: - Electric decoiler with manual tension release, manually operated, capacity Q=6,000 kg; - Sheet metal feed with circular (rotary) knives - Profiling unit - Electromechanical guillotine - 6-meter sheet metal stacker + 6-meter transport cart - Control cabinet - Safety guards If you have any questions or require additional information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Bwjdpfx Abjzk E A Asljr Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: new, Year of construction: 2025, Rotary Blades Model: LINDNER Type: MICROMAT Year of Manufacture: 2025 New / Ready for Use Bwedpfx Abexn Nyajlor 1. Blade 43x43x20 2pcs (KR) 2. Blade 43x43x20 2pcs (K8) 3. Blade 43x43x23 1pc (KR) 4. Blade 43x43x23 2pcs (K8) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 Bwsdpsxw Nrbjfx Ablsr New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blade Bwedpfxexn Nvhe Abler Model: LINDNER Type: ANTARES Year of Manufacture: 2025 New / Ready for Use We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Bwodsxn Namjpfx Abljr Year: 2025 New / Ready for Operation We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.

Condition: new, Year of construction: 2025, Scraper knife Model: WEIMA, GROSS, UNTHA Type: ZM30, GZ30, RS30 Year of manufacture: 2025 New / ready for immediate use 1. 8Z-66 knife 2. 4Z-66 knife Bsdexn I R Rjpfx Ablswr We are a manufacturer of replacement knives and spare parts for crushers and shredders.

Condition: new, Year of construction: 2025, Cutting Knife Bwjdpfexn H Stox Ablor Model: WEIMA, GROSS, UNTHA Type: ZM40, GZ40, RS40 Year of Manufacture: 2025 New / Ready for Use 1. 1Z-86 Blade 2. 2Z-86 Blade We are a manufacturer of replacement blades and spare parts for crushers and shredders.

Condition: new, Year of construction: 2025, Scraper knife Model: WEIMA, GROSS, UNTHA Type: ZM40, ZMK50, GZ40, RS40, RS50 Year of manufacture: 2025 Bjdpfx Absxn Iyfolswr New / ready for immediate use 1. 8Z-86 knife 2. 4Z-86 knife We are a manufacturer of replacement knives and spare parts for crushers and shredders.

Condition: new, Year of construction: 2025, Cutting Knife Bjdpfx Absxn H Sajlswr Model: WEIMA, GROSS, UNTHA Type: ZM40, ZMK50, GZ40, RS40, RS50 Year of manufacture: 2025 New / ready-to-use part 1. 1Z-115 Knife 2. 2Z-115 Knife 3. 3Z-115 Knife We are a manufacturer of replacement knives and spare parts for crushers and shredders.