Used Welding Device for sale (15,907)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Lodeyqr Sxopfx Acfoaf

Year of construction: 2024, condition: new, functionality: fully functional, Professional mobile filter device for extracting welding fumes with a powerful extraction arm Suitable for welding processes MMA MIG MAG TIG plasma cutting Extraction capacity max 2500 m3/h Extraction arm length 3m Motor power 1.1 kW Connection voltage 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m2 Powder-coated sheet steel housing with wheels and handles. Digital control panel with alarm log, operating hour counter and filter monitoring. The electronic circuit board is separate and protected from the air flow. Ledpfovnzwzox Acfoaf High-performance fan located downstream of the filter in a separate soundproof compartment. Spark protection filter built into the device as original equipment. A set of activated carbon filters (10 kg) can be used on request, which are particularly required for SOV/VOC, stainless steel and galvanized steel.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of input current: three-phase, total height: 1,420 mm, total width: 560 mm, total length: 1,100 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 100 kg, warranty duration: 12 months, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, DGUV certified until: 08/2027, welding power (max.): 19 kVA, open-circuit voltage: 61 V, welding current at 60% duty cycle: 470 A, welding current at 100% duty cycle: 420 A, space requirement height: 1,770 mm, space requirement width: 600 mm, space requirement length: 1,250 mm, input current: 30 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 500 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, We are offering this Böhler Welding TERRA NX 500 PME Rockstar welding machine, a showroom model from 2025, for sale. The package includes a wire feeder, a 1.5m intermediate hose set, a 4m UP/Down welding torch, and a ground cable. Lajdpfezvmi Isx Acfsf If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). Lodpfxouiac Ho Acfeaf New power and control cable.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Laedsfvqmxjpfx Acfjf Hydraulic

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information! Ledpfxev Uzf Ej Acfjaf

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Lsdpfxeytm Tie Acfjaf

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa Laodpfxsxlr Tdj Acfef KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Lajdpezkkayefx Acfjf Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Laodpfx Acok Radisfsf Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine Ledpfx Acoxy Hqtsfeaf -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm Lajdpfx Ajxvp S Ejcfsf -Weight: 1.4 kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder Lsdpfx Acewzv D Iofjaf - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Lsdpszimbkefx Acfjaf Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm Specifications Manufacturer SCHLATTER Model P1-42-11-22 1C VU122S S55S Year 1989 Condition Used Stock Number 0048 Connection 380V/50Hz S max 135 kWA Lajdpfx Acjvk Ukmjfsf Arm distance min /max 218/468 in mm Closing force 4KN Cooling water requirement 6 liter / min

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 ONLY 7 YEARS IN USE . MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS Ljdpfjvkkhbjx Acfoaf MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Description WE OFFER ORBITAL WELDING GUN TO WELD SHEET TO TUBE CAN BE USED FOR DIFFERENT APLICATIONS, TUBE TO SHEET. TUBE TO TUBE Specifications Lsdpovlarrefx Acfjaf Manufacturer POLYSOUDE Model TS - 2000 Condition Used

Condition: excellent (used), functionality: fully functional, Description WE OFFER AN NICE CONDIUTION NIMAK WELDING GUN 22 Kwa power with balanser and top traverse rails. READY TO WORK. EASY TO OPERATE. Machine is still in production working Ledpevk Ul Rofx Acfeaf Complete with balanser and traverse. Specifications Manufacturer NIMAK Model ZT 22/1 Condition Used Power 22 kwa Kuhl w. Q 4 L/MIN

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Ljderl S Ufjpfx Acfjaf Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Ljdpfxshzhyns Acfjaf Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Ledpfjy R I Tgex Acfeaf Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.

Condition: good (used), Year of construction: 2017, functionality: unexamined, We offer this well-maintained Förster Welding Systems 4225 railing welding fixture, year 2017. Manufacturer: Förster Welding Systems Model: 4225 Year of manufacture: 2017 Condition: good Laodpfxoy N A U As Acfof Category ID: 96 Type ID: 2257 Machine type: railing welding fixture If you have any questions or need more information, feel free to send us a message or call us.

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Laodpfoza T A Rsx Acfof The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Laodpfx Acoxfrv Eefef Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed. Laodpsy Efmgefx Acfjf