Used Wemas Vz 1200 for sale (5,109)

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. This device is not included. Iedozugqijpfx An Heif A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: used, functionality: fully functional, machine/vehicle number: E1X359200040, Year of construction: 2009, operating hours: 8,800 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,160 mm, power: 142 kW (193.07 HP), fork carriage width: 2,540 mm, fork length: 2,700 mm, empty load weight: 25,920 kg, drive type: Diesel, Heavy-duty forklift – diesel Chassis number: E1X359200040 Load centre: 1200 Fork width: 280 mm Fork thickness: 90 mm Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres size: 12.00-24 Front tyres condition: 40 – 60% Rear tyres type: Superelastic Rear tyres size: 12.00-24 Isdpfx Ajxybdusn Hsif Rear tyres condition: 20 – 40% Description: Camera, central lubrication Sideshift, fork positioner, 4th valve, full cabin,

Condition: used, functionality: fully functional, load capacity: 16,000 kg, fork length: 4,000 mm, Forks Load center: 1200 mm Fork width: 200 mm Fork thickness: 100 mm Iiedpfjytkkxjx An Hef Condition: Ready for operation and fully functional Technical condition: Good Description: In addition to this MAKE - MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing on fair terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Please call me, Marco Levermann; I am happy to advise you in detail about this MAKE - MODEL. By the way: Our specialist forklift workshop is dedicated to the repair and maintenance of large equipment from 8 tonnes upwards. We can also offer to sell your vehicle on consignment at our premises.

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm Iedpevizuijfx An Heif max. workpiece diameter: 260 mm Power: 120 KW dimensions: 21,5 x 5 x 3,8 m mm weight: 90.000 kg pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 *

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls - machine after refurbishment, in excellent condition - year of manufacture 2012 + Diosna HK1200 dough tipping device with drive and bowl scraper - complete with safety cage - year of manufacture 2020 Iodpfsztz E Ejx An Heif

Year of construction: 2010, condition: ready for operation (used), Connected load: 8kW, weight: 2.2t, with control cabinet. Iodpeilht Usfx An Hsif

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Ijdpfx Anezhxi Ro Hjif Control: Fanuc 0i-TD

Condition: used, maximum load weight: 12,240 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2022, loading space length: 7,280 mm, loading space width: 2,450 mm, loading space height: 2,490 mm, Year of construction: 2022, Refrigeration unit Thermo King UT-1200, diesel + 380 V, 2 evaporators, temperature recorder. ----Deep-freeze box Junge Z-VA-F18 ----* BPW axles * Lift and lowering device for air suspension * Disc brakes * Air suspension * Reversing camera * Aluminium cargo floor * Load securing rails * Rear doors * EBS * Without spare wheel ----Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer. Iodeux Uabjpfx An Hoif

Condition: excellent (used), Year of construction: 2023, Rod loader SL 1200 Year of manufacture: 2023 Iijdezuxwbjpfx An Hjf

Condition: used, mileage: 203,500 km, power: 375 kW (509.86 HP), first registration: 05/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,450 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Pipes (3 pieces) * Tail lift Bär 2,000 kg, 1,800 mm, can be driven under. * Refrigeration unit Thermo King UT-1200, diesel + 400 V, data logger. * Tag axle, liftable * Service book maintained ----Refrigerated box Schmitz. ATP/FRC. ----* MAN BrakeMatic (Electronic Braking System) * MAN Media Package Navigation * Connectivity Board Module (Rio Box) * Control module for external data exchange (KSM) + Fleet Management * Cab insulation NORDIC (for cold protection) * Transmission 12-speed automatic * Tail lift, can be driven under * Box with rear doors and tail lift * MAN EasyStart (hill start assist) * Emergency Brake Assist 2 (EBA2) * Comfort Package 1 Driver * Automatic windshield wipers with rain sensor * ECO mode, basic setting for MAN EfficientCruise * MAN Efficient Cruise 2 (GPS-supported cruise control) * Front axle air-sprung * Differential lock rear axle * Traction control system (ASR) * Rear axle air-sprung * Digital axle load display (ALM) in the cab, air-sprung axles * Anti-lock braking system (ABS) * Retarder * Emergency brake signal (ESS) * Electronic Stability Program (ESP) * Disc brake * Wheelbase 5,500 mm * ComfortSteering * Sliding/lifting sunroof, glass version Iiodpfx Anezch Ims Hef * Battery main switch * Hill start assist * Lane keeping assist (LGS IV) + lane return assist (LRA) * Exterior sun visor transparent * Exterior mirrors, electrically adjustable and heated * Air horns, cab roof * Cooler box in the cab * Power windows for driver and passenger door * Cab suspension air-sprung * Central locking with remote control * Immobilizer (transponder) * Transmission MAN TipMatic 12 26 DD with Retarder 35 * Auxiliary air conditioning * Auxiliary heater * Heated driver's seat * Rear view camera * Tank 780 liters * Additional long-range and fog lights with turning light function * Engine version Euro 6 * Controlled rocker arm brake (EVBec) * Video turning system (VAS) with display * Transmission function EfficientRoll * Transmission function Coasting * Engine version with AdBlue * Aluminum cargo floor * Aluminum rims * Driver's seat air-sprung * Co-driver's seat air-sprung * Bunk bed, lower * Bunk bed, upper * Adaptive cruise control (ACC) with stop-and-go function * Load securing rails * Electric front windshield roller blind * Tag axle, steered and liftable * Without spare wheel ----Sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Year of construction: 2002, condition: good (used), bar length: 600 - 1.200 mm Sheet size: max 490 x 320 mm; min 220 x 150 mm Iisdpfx Anoq Ul S Te Hjf Mechanical cycle time: min 24 s Effektive cycle time: min 30 s infeed height: adjustable 250 - 550 mm Log delivery height: 1.150 mm Paper weight (grammage): max 40 - 130 g/qm Electric supply: 400/50 V/Hz/A Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Equipment delivery • delivery left • automatic wood inserter palletizer • pallet dispenser • transport rollers

Year of construction: 2002, condition: good (used), bar length: 600 - 1.200 mm Sheet size: max 490 x 320 mm; min 220 x 150 mm Mechanical cycle time: min 24 s Effektive cycle time: min 30 s infeed height: adjustable 250 - 550 mm Log delivery height: 1.150 mm Paper weight (grammage): max 40 - 130 g/qm Electric supply: 400/50 V/Hz/A Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Equipment delivery • delivery right • automatic wood inserter Iisdpfeq Ul Ugex An Hof palletizer • pallet dispenser • transport rollers

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Fork length 1.000 mm lifting capacity max 1.200 kg Stroke height 1.000 mm Ijdpfsd Idalsx An Hsif Fork distance (outside edge) 560 mm Equipment suitable for Euro-pallets (80 x 120 cm) • with forks

Year of construction: 2006, condition: ready for operation (used), Vehicle Description 4 TEREX TV 1200 rollers 2,920 kg 120 cm roller width Roller 1: Deutz 19.5 kW, approx. year of manufacture 2006, approx. 2000 hours, price: €9,950.00 net Roller 2: Deutz 19.5 kW, approx. year of manufacture 2006, approx. 2000 hours, price: €9,950.00 net Roller 3: Kubota 24.5 kW, year of manufacture 2010, 1,213 hours, price: €11,900.00 net Roller 4: Kubota 24.5 kW, approx. year of manufacture 2007, 1,727 hours, price: €10,900.00 net Affordable delivery options also available! Iijdpfx Anohz Ebme Hef

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net Isdpfxs E Dque An Hoif -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Isdpfx Aezkbr Ten Hoif Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Year of construction: 2019, condition: excellent (used), Image-guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 series Year of manufacture: 2019 Control system: Keyence Technical data: ----- • Camera chip: 4 MP CMOS • Measuring range: 600 x 300 x 200 mm • Smallest display unit: 1 µm • Smallest angle: 0.0001° • Repeatability (locked): ±3 µm • Maximum table load: 25 kg • Display: 15" TFT Iiedsih R Uxopfx An Hsf • Weight: 40 kg Accessories: ----- • Manuals • As-delivered condition (Datasheet attached)

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm Iiedey Akpuopfx An Hsf max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: new, Runner stackers – flexible and efficient Automatic removal of finished runners from existing production lines. - Stacking and nesting of runners - Suitable for different runner dimensions Iiodpsztdp Tofx An Hjf - Integration into existing systems - Reduction of manual labor - Efficient and space-saving stacking Ideal for retrofitting existing runner production lines with automation.

Year of construction: 2012, condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Iiodpfolc Dv Usx An Hof

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, base Iijdpfszru Tmox An Hef -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. Iedjzum Ubepfx An Hjif AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: used, functionality: fully functional, machine/vehicle number: FN471269, Year of construction: 2014, operating hours: 13,651 h, load capacity: 1,800 kg, lifting height: 3,600 mm, free lift: 1,750 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN471269 Mast type: Duplex Iisdpfxjzif Nto An Hof Condition: Ready for operation and fully functional Technical condition: good Battery year of manufacture: 2014 Description: I have kept the text concise and adapted the device data to the Jungheinrich EFG 218: For sale is an electric 3-wheel forklift, a Jungheinrich EFG 218. The forklift is ready for operation and fully functional. The visual and technical condition are good. Vehicle data: Year of manufacture: 2014 Operating hours: 13,651 h Load capacity: 1,800 kg Mast type: Duplex Lifting height: 3,600 mm Overall height: 2,250 mm Free lift: 1,750 mm Fork length: 1,200 mm Battery year of manufacture: 2014 Chassis number: FN471269 Internal number: R0784 The device is immediately available. A charger can be ordered separately upon request. Quick and uncomplicated transport is possible upon agreement. Errors and prior sale are subject to change. Sale is made with the exclusion of any warranty or guarantee. Fork positioner, 3rd valve, 4th valve.

Condition: used, Year of construction: 2007, functionality: fully functional, Mebor HTZ 1200 Logs conveyor Good condition Iijdpozu Tvfsfx An Hef

Year of construction: 2026, condition: new, Butterfly table 12m long - available from stock! available immediately! BOOSTON - We are a manufacturer of machinery and equipment for timber frame prefab house manufacturing. Buy directly from the manufacturer! Quality guarantee, short lead time. We offer an assembly table - hydraulic (butterfly table) consisting of two wings with a length of 12.0m (available models from 6m to 12m). -Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm Ijdpfomrtx Ujx An Hsif - Permissible load on the table: 95kg/1m2 (for a 12m table - total of 3500kg) - Sturdy powder-coated steel construction - Holes for mounting SD-01 clamping cylinders