Used Wieger Esw 3/25 for sale (71,159)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grained steel welded structure, lightweight design, fifth wheel with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center; uncoupling with load is not possible; when uncoupled, the vehicle must lean backwards. Support wedges + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones Splash flaps behind the last axle in asphalt design, attached to the fender with a hinge, with the option to be hooked onto the top of the fender, shortened fender Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, incl. forced lowering and start-assist Hot-dip galvanized lift axle mechanism Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve Vehicle driving stability system Wheels & Tires 385/65R22.5 Steel rims, factory silver "TPMS" according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be a prerequisite in the truck. Only for base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides coupled with the turn signal "flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin tamper-proof sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Body Steel round body, Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Membrane back wall Rear wall as a swing gate, externally mounted with double hook locking. 2 clamping screws with cam locks on the sides at the bottom. Side walls continuous 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Body in insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform + access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-up cover on one side for stowing on the right side, with central locking on the left side Itodpfxsi Rix Is Anwjh Country of registration/signage Germany Test approval according to EC 2007/46 Body stability according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 prepared for license plate holder, single-row Warning sign according to ECE - 70 Paintwork Frame DB 7350 Novagrau "10 years warranty against rust perforation" Support feet galvanized Body/ Side tarpaulin RAL color, solid color Roll-up cover RAL 7035 light gray Thermal insulation a

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Itedpfx Asi Ri Nfsnwoh Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in a basic lightweight design, drawbar plate with 2 interchangeable kingpins Curved front closure, patented 24 tons, 2-speed landing gear, single-sided operation, with a straight lower part, without thrust compensation Underrun protection, foldable Half-shell fenders Tow hitch at the rear Axles + suspension SAF disc brake axles with a 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the tractor unit's display, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and a ladder on the front wall. Greenline - conical and aerodynamic tipper body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a pivoting flap with a double-hinge hinge, externally mounted with 2-fold hook lock. 2 clamping screws with cam locks on the sides at the bottom. Side walls are continuously 4 mm thick, floor is 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connecting plate for air/electricity and brakes with ample space for optimal operation. Rolltarp, one-sided for storage on the right, with central locking on the left Registration country/signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rusting Support legs, black coated Tipper body, RAL color of your choice, solid color Rolltarp, RAL color of your choice, solid color Available in a thermally insulated version!

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille * Undercarriage approx. 70% Inspection possible at any time during our business hours, test drive by appointment! Iedpozc Airjfx Anwoth For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: new, mileage: 493,099 km, power: 302 kW (410.61 HP), first registration: 07/2008, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 6x2, fuel: diesel, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro4, suspension: air, total width: 3,500 mm, total height: 5,600 mm, Year of construction: 2008, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional Options and Accessories = - Aluminum fuel tank - Radio/CD player - Sleeper cabin - Sun visor - Immobilizer = Further Information = Axle brand: TPU Suspension: Air suspension Front axle: Tire size: 315/80 R22.5; Steerable Rear axle 1: Tire size: 315/80 R22.5; Dual tires Rear axle 2: Tire size: 385/65 R22.5; Lift axle Unladen weight: 11,653 kg Payload: 14,597 kg Itedpfx Ajzcpftjnwjh GVW: 26,250 kg Reference number: 56

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck Itodox Suzajpfx Anwsh ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its class. It can be used in the wood and paper industry, in recycling, in logistics applications, etc. Whether in industrial buildings, in the yard, or on light terrain, the hydrostatic transmission, combined with the powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder, giving it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Itsdpjzc Samsfx Anwoh Side shifter, 3rd valve, half cab, full cab, full free lift, CE certificate.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm Iodpfx Anjzdlwgjwoth - Weight: approx. 190 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Equipment: ABS, F.X. Meiller 25 m³ NEW VEHICLE 5 units in stock - Kisa 3 - Steel tipping body - Lift axle - LED rear lights - LED side marker lights - LED license plate lighting - Disc brakes - Front wall: 4 mm BS 70 - Rear wall: 4 mm HNW Hardox - Side walls: 4 mm HBW Hardox 450 Isdpfx Anjw Rittjwjth - Floor: 5/6 mm HBW 450 Hardox, tailored - Side wall height: 1,500 mm Subject to errors and prior sale. Internal vehicle number: 11235+11236+11237+11238+11239 WhatsApp support available! For questions about the vehicle or for more information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Year of construction: 2025, condition: excellent (used), functionality: fully functional, We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm Itodpfx Aexxim Ionweh • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: used, Year of construction: 2014, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Ijdpfsy N R Htex Anwoth

Condition: ready for operation (used), Heidenhain UM 112 ID 325 001-02 SN13068381B, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itedpfox Er Uwjx Anwoh

Condition: ready for operation (used), Heidenhain UM 113 . 325002-02 SN:12225960, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iodpox Etb Sefx Anweth

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdoy S Nmdepfx Anwjh

Condition: ready for operation (used), Siemens SINUMERIK 6FX1118-8AD01 / 548 025.9004.01 machine control panel 3 T with key, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itedpfx Anox Eu Rbjweh

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Ijdpfx Anex Dwineweth

Condition: ready for operation (used), Bosch SM 25/50-TA servo module 1070077376-107 SN: 002359561, used, good condition, 100% functional, delivery scope as per photos. Ijdex Eqyxjpfx Anweth

Condition: ready for operation (used), Bosch SPM 25 spindle module SN:305445, the spindle module has been overhauled by the manufacturer, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdpfx Anei D Uf Tswsh

Condition: ready for operation (used), Bosch SPM 25 spindle module SN:349005, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itsdsx Eqy Sopfx Anwoh

Condition: ready for operation (used), Heidenhain UM 114 . 325 005-01 Serial number: 10488786, professionally overhauled and tested with 3 months warranty, in good preserved condition, 100% functional, scope of delivery as per photos. Itodjx Etdyopfx Anwjh

Condition: ready for operation (used), Indramat KDA 3.2-150-3-A0I-W1 AC main spindle drive SN:237254-01029, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itsdpfex Etxqox Anwjh

Condition: ready for operation (used), Siemens 6FC5356-0BB14-0AA0 NCU 561.4 SN:ST-V22037257, the item has been refurbished and has a 3-month warranty, used, normal signs of wear, 100% functional, scope of delivery as per photos Ijdsi Ed Ebjpfx Anweth

Condition: ready for operation (used), Siemens 6SN1125-1AA00-0DA0 Lt-Module Version: A SN:T-PN2029425. The item has been refurbished and comes with a 3-month warranty, used, normal signs of wear, 100% functional, delivery as shown in the photos. Itedsx Eu H Aopfx Anwjh

Condition: ready for operation (used), Heidenhain UM 114 . 325 005-12 SN: 12918615, professionally overhauled and tested with 3 months warranty, in good condition, 100% fully functional, scope of delivery as per photos. Isdpfx Anox Etd Toweth

Condition: ready for operation (used), Heidenhain UR 230 compact inverter Id.362 593-02 SN: 15161883, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Itedpfjx Eticjx Anwoh

Condition: ready for operation (used), Regatron GRHB 380/025-25 Regatron frequency converter, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdpfx Ansi Ecmpoweh