Used Winch 2000 Kg for sale (67,775)

Condition: new, *AVAILABLE IMMEDIATELY* with steel sheet walls, 4x support legs Special price for demonstration stock vehicle from 2023 – No initial registration!! Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 661 kg • Payload: approx. 1,339 kg • Internal dimensions: 288 x 194 x 200 cm (L x W x H) • Overall external dimensions: 447 x 250 x 256 cm (L x W x H) Gbsdpsyyw Irofx Almol • Loading edge height: approx. 52 cm • Tyres: 13-inch alloy wheels • Brakes: Yes • Jockey wheel: Yes • 100 km/h approval: optional at extra cost • Vehicle documents included Equipment: • Robust V-drawbar, fully hot-dip galvanized • KNOTT overrun brake system • 18 mm thick floor plate • Reinforced steel sheet side walls and roof • Rear double-wing doors • Lever lock on rear doors • 6 tie-down rings on the floor • Jockey wheel • Auto-reversing system • Plastic mudguards • 13-pin connector • Reverse light • Large-size safety lighting • Integrated rear fog light • Body: splash-water protected • Registration documents: ZBII & COC papers Optional accessories (available on request): • Anti-theft device • Lashing straps • Additional lashing eyes • Slat rails with rubber coating for lashing straps & load bars • Load bars in steel or aluminium • Interior lighting • Reversing light • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - Vehicle registration document dispatch in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years: specialist dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Errors, omissions and prior sale excepted -

Condition: used, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2019, Equipment: ABS, Low loader Lecitrailer Godpfxsulllts Almebl Newly built Top condition

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 The lifting devices were stored in working condition but are no longer needed. The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Godpsxxv Eqefx Almobl Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Collection in Bremen. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: new, empty load weight: 852 kg, maximum load weight: 1,148 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,600 mm, loading space height: 1,900 mm, loading space volume: 9.7 m³, color: grey, construction height: 2,470 mm, working width: 2,050 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2000 RAMP/ DOOR COMBI 320X160X190CM VIEHANHÄNGER RAMPENGUMMI LÜFTUNG BOXENSTANGE TECHNICAL DATA: - Make: Vezeko - Model: VT 2000 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 320 x 160 x 190 cm - External dimensions (L x W x H): 464 x 205 x 247 cm - Floor loading height: 51 cm - Perm. Total weight: 2,000 kg - Unladen weight: 852 kg - Payload: 1,148 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals: 2 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: steel mudguards - Standing area:5.1 m - Double deck:No - Driving gate: Optionally available - Cross partition inside: Optionally available - Window:Sliding side window, barred - Front exit:No - Rear door / hatch material: aluminum, rubber-covered and kick strips - Interior light: Optional, can be retrofitted - Rear lighting:Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear track marker lights - Plug for lighting: 13-pin - Vehicle documents:COC papers DESCRIPTION: - Folded aluminum checker plate tub, welded to screen-printed wooden floor - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized, welded tarpaulin frame - ventilation opening in tarpaulin can be rolled up at the front - 2 side struts for additional stability - ventilation opening one pair, rear portal, continuously welded, hot-dip galvanized in solid design - rear flap with flap - door combination - rubber mat on the loading flap with integrated step strips - box bar can be removed from the rear flap - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving license - ALKO parking brake and parking brake - rear brake - rear parking brake. plug - reversing lights - large safety lights - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle - accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - transverse separation - interior light - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN Gsdpfxsu Htzms Almobl

Condition: new, empty load weight: 814 kg, maximum load weight: 1,186 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,150 mm, loading space width: 1,650 mm, loading space height: 2,300 mm, loading space volume: 12.5 m³, color: black, construction height: 2,800 mm, working width: 2,200 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 2 - Gross vehicle weight: 2,000 kg - Unladen weight: 814 kg - Payload: 1,186 kg - Interior dimensions: 315 x 165 x 230 cm (LxWxH) - Overall exterior dimensions: 460 x 220 x 280 cm (LxWxH) - Tires: 175/70R13 steel rim - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100km/h: at extra charge! - incl. vehicle documents Vehicle body: - Floor: Aluminum BiComp floor 21 mm - Side walls/body: Anodized double-walled aluminium - Roof material: Full polyester - Colour: Black-metallic - Tack room: Yes - Tack room equipment: Luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door lock - Feed troughs: Yes, removable from tack room - Chassis: EquiDrive® chassis prepared for 100 km/h - Height of stall bars: approx. 96 to 116cm - Distance between stall bars: approx. 163 to 182cm - Distance between tack room and breast bar: approx. outside trailer Baumann / with partition wall: - Tailgate material: approx. 1000kg load capacity, rubber covered anti-slip - Tailgate function: standard tailgate - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - EquiDrive® chassis - Preparation for wheel shock absorbers - 13-pin plug with reversing and fog lights - Alu-BiComp floor 21 mm - Rubber floor 8 mm thick glued in and sealed - Body made of double-walled, anodized aluminium profiles - Solid, galvanized frame profile - Elegant, galvanized rear rear support with integrated lighting - Large access door with 3-point locking - Overflow flap with rubber granulate mat - Divided breast and rear bars, Tinted opening windows in poly hood - Interior lighting and hay net ring - Automatic support wheel mounted in the middle with maneuvering handle - Exclusive wind deflector for draught-free interior ventilation - Tires suitable for 100 km/h (only in Germany) - Tethering option outside - Tethering option inside Inside tethering option - Padded safety stall bar system - Divided stall bars with plastic protection - Depth adjustment for stall bars - PVC transparent partition wall - Front and rear panic release - Lockable access door - Door retainer on access door - Tinted and hinged windows - Tandem mudguards, (black) - Lifting device gas pressure shock absorber on tailgate - Step on rear flap Special equipment included in the price: - Tack room inside with: Saddle holder, net, mirror, bridle holder Accessories can be retrofitted: - Wheel shock absorber with 100 km/h - Side step protection inside - Side padding inside - Spare wheel with holder - Spare wheel cover - Cover for automatic jockey wheel - Storage bracket for saddle - Foal grille - Chest bar padding - Wear mat/scratch mat - Video surveillance system - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Trailer Center BAUMANN GmbH Dinxperloer Str. 38 Gsdpeu Hrqgjfx Almobl

Condition: new, empty load weight: 661 kg, maximum load weight: 1,339 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,880 mm, loading space width: 1,940 mm, loading space height: 2,000 mm, loading space volume: 11 m³, color: silver, construction height: 2,560 mm, working width: 2,500 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel walls, 4x supports, * IMMEDIATELY AVAILABLE * with sheet steel walls, 4x supports Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - permissible total weight: 2000kg - unladen weight: 661 kg - payload: 1,339 kg - interior dimensions: 288 x 194 x 200 cm (L x W x H) - overall exterior dimensions: 447 x 250 x 256 cm (L x W x H) - loading sill height: 52 cm - tires: 155/80R13 - brakes: yes - jockey wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - floor: Wood, screen printing plate 18mm - Walls: sheet steel walls - Roof material: sheet steel roof - Chassis: KNOTT rubber spring axle - Number of lashing eyes: 6 pieces - Rear door: YES - Tailgate: - - Tailgate material: sheet steel - Tailgate/door function: angle lock - Interior light: at an extra charge - Supports: Yes, 4 pieces - Overrun device & brake: Yes, KNOTT - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - KNOTT overrun device - 18 mm thick floor plate - Reinforced sheet steel side walls and roof - Double-wing rear doors - Angle lever lock on the rear doors - 6 lashing rings on the floor - Support wheel - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing lights - Large rear lights Plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - lashing straps - additional lashing eyes - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gjdpfx Aeu Htlrslmobl

Condition: excellent (used), Year of construction: 2006, 45 linear meters SSI Schäfer Palflex pallet racking incl. mesh shelves Used item, good condition, see photos Year of manufacture: 2006 Height: approx. 6.5 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Red beams Mesh shelves included! 2 pieces of mesh per 2.7 m beam length Asking price: €7,490 net ex stock Offer includes: + 17 pre-assembled frames, 120 cm deep, approx. 6.5 m high Gbjdpfxokx E Rye Almol + 96 beams, 2.7 m long, 1,500 kg shelf load capacity with evenly distributed load + 192 locking pins + 96 galvanized mesh shelves for 48 levels of 2.7 m beam length each + 68 concrete anchors + Load capacity signage Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information on request. Always over 5,000 linear meters of pallet racking of various manufacturers in stock. (Subject to changes and errors in technical data, information, and prices. Intermediate sale reserved! See our terms & conditions. All prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from various sectors • Swept clean business clearances • Business liquidations • Fast – flexible – efficient! We also clear out and/or dispose for insolvency administrators. Please contact us with a brief description; we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 2006, 70 linear meters Pallet Racking SSI Schäfer Palflex incl. Mesh Decks Used, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Red beams Mesh decks included! 2 mesh decks per 2.7 m beam length Negotiable price: €8,290 net ex stock The offer includes: Gbjdpfx Alskx E I Nsmjl + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg load capacity per level (evenly distributed load) + 200 safety clips + 100 galvanized mesh decks for 50 levels, each with a 2.7 m beam length + 104 concrete anchors + Load signs Goods in stock. Transport and installation available on request. Inspection by appointment at any time. Further information on request. Always over 5,000 linear meters of pallet racking from various manufacturers in stock. (Changes and errors in technical data, specifications and prices as well as prior sale reserved! See our T&Cs, all prices excl. VAT ex stock) Purchase / Sale We are continuously looking for and offering a wide range of items from various sectors clean-sweep business clearances company liquidations fast - flexible - efficient! We also clear out or dispose of assets for administrators. Send us a few keywords – we will contact you promptly. To access our site, please click on our logo!

Year of construction: 2024, condition: used, functionality: fully functional, construction height: 1,850 mm, load capacity: 2,000 kg, Hydraulic cable winch Godjv N Rzxepfx Almobl Technical condition: New

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Gbsdpfxshrnbkj Almel Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. Magni Jib with Winch JW2000 / 2 Tonnes / Suitable for RTH & TH Series / NEW Price: €9,490.00 net / €11,293.10 gross - Max. lifting capacity: 2,000 kg - Length: 2,390 mm - Cable diameter: 10 mm - Working cable length: 25,000 mm - Cable lowering speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom jib with integrated winch - Lattice boom construction made of tubular sections for optimal weight/performance ratio - Winch with pressure roller and hydraulic end-of-travel switch for safe cable winding/unwinding This attachment is suitable for RTH and TH series. Gbodpfx Aeykht Sjlmjl Product code: ATT-04-015 We have many more Magni attachments in stock for immediate delivery! Mr. Herden (phone) will be pleased to assist you. We are happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! = More information = New: Yes Application: Construction Contact Marius Herden for further information.

Condition: excellent (used), Loos 2000kg/h 10Bar Bj 1990. top condition Gjdolp Dpajpfx Almsbl

Condition: excellent (used), Loos U-HD 2000kg/h 16Bar Gbodpfou I Rxlex Almsl

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Gedpfx Aljw Ivqmjmsbl Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Gbedou Ey Dlepfx Almjl Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blast house components. Flat conveyor floor, cross conveyor screw, bucket elevator, air sifting, sieve, blasting medium hopper, blasting unit, filter system, fan, air ducts, lamella suction wall, blow box, electrical control as a kit without assembly. Alternatively, the plant components can also be assembled by our specialist fitters on your premises. Gbsdpshc T Nlefx Almjl

Condition: good (used), mileage: 582,697 km, power: 130 kW (176.75 HP), first registration: 03/2014, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,760 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, total length: 9,300 mm, total width: 2,550 mm, loading space length: 7,550 mm, loading space width: 2,450 mm, loading space height: 2,550 mm, Year of construction: 2014, Equipment: cruise control, electric window regulation, = Additional options and accessories = - Aluminum fuel tank - Speed limiter - Sun visor = Remarks = Tail lift: Dhollandia 2000kg = More information = Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Number of cylinders: 4 Engine capacity: 4.249 cc Empty weight: 7.410 kg Carrying capacity: 4.580 kg GVW: 11.990 kg Visual appearance: good Registration number: 92-BDR-2 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Gbjdpfxsydb R Ds Almjl Email:

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine Gjdpfjy R Ergox Almebl • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: used, loading space length: 102,400 mm, loading space width: 25,100 mm, loading space height: 20,900 mm, total width: 26,000 mm, total height: 35,700 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension - Disc brake system = Notes = Gbsdjy Ivrrjpfx Almjl For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). Equipped with SKO10 refrigerated trailer, Carrier Maxima 1300 refrigeration unit, tail lift: BÄR BC 2000 S4-C3 (2,000 kg), additional lights at the rear of the vehicle, air suspension, SAF axles, disc brakes, spring parking brake, Wabco ABS, smartboard, steering axle, cargo space dimensions: length: 10,240 mm, width: 2,510 mm, height: 2,090 mm, tire tread depth: 1st axle 12-17 mm, permissible total weight: 22,000 kg, unladen weight: 6,610 kg, payload: 15,390 kg. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. For more information, please visit our website. ... Subject to errors, changes, and prior sale!!! Steering axle = Further Information = Unladen weight: 6,610 kg Payload: 15,390 kg Gross vehicle weight: 22,000 kg Please contact Tobias Ebert for further information.

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Gbodpfx Alsxbqr Dsmsl Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Gbjdpfx Asvcqy Uolmol Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Godpfxju Tha Io Almjbl Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Gbjdpju Thh Eefx Almsl Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Gsdeng Exaspfx Almebl Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Gedsndn Agjpfx Almsbl Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site