Used Wmw Diverse for sale (1,483)

Year of construction: 1985, condition: ready for operation (used), Offered is a conventional cylindrical grinding machine. Set to ZRO 40.10, protection class: IP54/IP32, control system: Erfurt electronic. Equipped with integrated control cabinet, workpiece feed system, separate control panel, coolant system. Weight: approx. 380kg, overall dimensions X/Y/Z: approx. 2500mm/1800mm/2000mm. Inspection possible by arrangement. Bjdpjy Ulm Ssfx Aqwell

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Bljdozulg Nepfx Aqwel

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Bodpfxezukufs Aqwell

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Bsdpfx Ajzukt Ijqwoll

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which Bodjwx R Rdspfx Aqwsll move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Year of construction: 1988, condition: used, centre height 140 mm chucking diameter 250 mm swivelling range 90 Grad weight of the machine ca. 150 kg Dividing head swivable of a Heckert FU 400 Bjdpjipyx Tjfx Aqwsll

Year of construction: 1988, condition: used, tool adaptor SK 40 weight 165 kg Type Uni. 0 Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315. Bsdpfeipyx Eox Aqwell

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm weight 126 kg Bljdjipyx Njpfx Aqwol Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t Bljdpsztrvnjfx Aqwjl dimensions of the machine ca. 3,7 x 2,1 x 1 m

Year of construction: 1988, condition: used, diameter different mm weight 200 kg Bedpfxjipyybe Aqwjll Type different 0 14 pieces arbors for milling tools and 4 steadies, 2 for FU 400 (84 mm hole dia.), 1 for FU 315 (70 mm hole dia.) and one small one (35 mm hole dia.).

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Bsdpfxohz Ua So Aqwjll

Condition: excellent (used), functionality: fully functional, Various as-new VDI40 tool holders with cylindrical receptacle, used tool holders in excellent tested condition, top quality, various manufacturers including e.g. ISCAR. Pos. 1) Order number: 401_404_E2 Available: 4 pcs Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 32mm Price each: €45.00 Pos. 2) Order number: 405_E2_01 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 31mm Price each: €45.00 Pos. 3) Order number: 406_407_408_E2_03 Tool holder for cylindrical tools / boring bars / drills Available: 3 pcs Receptacle diameter: 25mm Price each: €45.00 Pos. 4) Order number: 409_E2_01 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 20mm Price each: €45.00 Bedpfjyuv Ulsx Aqwjll Pos. 5) Order number: 410_411_E2_02 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 8mm Price each: €45.00 Dimensions: D = 83 mm d-2 = 83/40 mm (45.52 mm) d-4 = xx (8,10,12,20,25,32,40 mm) internal diameter H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = 53 mm Form E2 For drilling tools with cylindrical shank With internal as well as external coolant supply Surface hardened, black oxidized and ground

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Bedpfozgaiisx Aqwell Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Bodpfxezrxr To Aqwjll Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Blsdpfxszgdfbj Aqwel Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions Bledpfju N D Rqex Aqwsl - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: ready for operation (used), WMW Column Drilling Machine IIK 20 -Drilling capacity: 20 mm -Spindle speeds: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 rpm -Number of speeds: 8 -Gear shifting via 2 shift levers (A/B) -Manual feed -Right/left rotation -Coolant system -Machine light -Height-adjustable and swiveling drilling table with T-slots -Solid cast iron construction -Three-phase motor Dimensions: L x W x H 0.9 x 0.8 x 1.7 meters / Weight 420 kg Blsdpfxoztfdfs Aqwel Errors and omissions excepted.

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Blodpfx Aqoztpxmewol

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Bjdpfx Ajv Hx R Noqwjll Weight approx. 22 tons Video of the machine in operation available!

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Bljdpfx Aqszryn Aswol Technical data: - Markierung: Ohne oder MEC - Bore: 40 mm - Weight: ~100 kg

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Bjdpswq A Avofx Aqwell Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Very good used condition Rails available in yellow or red! Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm Bodpfx Aqsv Hckgjwsll - Weight approx. 2100 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: Bledpfx Aqswd Nybowel - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: Bodpfsvxg Rujx Aqwell - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm Bljdpfxot Dxwgo Aqwel - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice