Used Xiecheng Xc-Gy20 (15 Kw) for sale (44,768)

Condition: used, Gear motor, electric motor -Speed: 15/31 rpm Kdedjckbgtopfx Ah Asp -Power: 0.2/0.3 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 450/210/H200 mm -Weight: 24 kg

Condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower Kdododz Smnopfx Ah Aop -Motor power: 15 kW -Speed: 2925 rpm -Total pressure: Pg 33 m bar -Total pressure: Pst 30 m bar -Volume flow: 9660 m3/h -Inlet connection: O 400 mm -Outlet connection: O 400 mm -Dimensions: 1090/860/H1200 mm -Weight: 238 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Engine manufacturer: MGM -Gearbox manufacturer: MGM -Speed: 3.25/15 rpm -Power: 0.45/1.3 kW -Construction: B3 angle -Diameter shaft: 38 mm -Protection class: IP 44 -Number: 2x motors available Kdedpfsciq A Tsx Ah Asp -Price: per piece -Dimensions: 700/300/H440 mm -Weight: 64 kg

Year of construction: 1988, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm Kdjdecmuwqopfx Ah Aep -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Condition: used, Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm Kdsdscppu Djpfx Ah Ajp -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Condition: used, Electric motor, three-phase motor -Power: 15 kW -Speed: 1455 rpm -Construction: B5 -Dimensions: 660/350/H420 mm -Weight: 112 kg Ksdpfx Aedwky Ajh Ajdp

Condition: used, Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 Kdodpfec Nirysx Ah Aep -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 15/60 rpm Kdsdpfxoc Uyd Ie Ah Aop -Power: 0.1/0.45 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 410/210/H190 mm -Weight: 24 kg

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Ksdpjzh Hwisfx Ah Asdp Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW 1425 rpm Type: KNGA-160LB-04D IEC160L IMB35 -Individual components: see images -Liter output: unknown Kdsdpfx Asgz Iq Ueh Aep -Dimensions: 900/520/H610 mm -Weight: 261 kg

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg Kdedpjzdt E Ssfx Ah Aop

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller Kodpfewcx Rmex Ah Aodp -Manufacturer: KEB, Frequency converter Drive Controller Combivert Type: F4 -Part No.: 16 F4 C1G-M440/2 2 -Power: 23 kVA / 15 kW -Quantity: 1x frequency converter available -Price: per piece -Dimensions: 415/180/H335 mm -Weight: 14.9 kg/pc.

Condition: used, Q 33.0 m³/h P 15,0 kW Kdedsikwapspfx Ah Aop max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, overall weight: 475 kg, total length: 1,890 mm, total width: 720 mm, total height: 1,600 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 110 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Hertz HGS F 15 Kompakt (10 bar) screw compressor Delivery capacity: 2.2 m³/min - Energy-efficient IE3 motor with star-delta start - 500-litre compressed air receiver - AD2000 certificate - Integrated refrigeration dryer - Pre- and after-filter Kdedpfewum N Iox Ah Ajp - Condensate drain - Digital control Logik 9 On request, the compressor can be delivered within a 200 km radius of our company location. Delivery costs by arrangement.

Condition: new, 2021 Durma 15 kW Fiber Laser Manufacturer: DURMA Type: HD-F(L) 3015 Working area X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control system: Siemens Sinumerik 840D Sheet metal thickness, mild steel: 40 mm Sheet metal thickness, stainless steel: 30 mm Sheet metal thickness, aluminum: 30 mm Sheet metal size: 3048x1524 mm Load capacity: 200 kg/m² Speeds X-Y axes: 100 m/min Simultaneous speeds X-Y axes: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Kdedpfx Aogk Nlpoh Aep Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment: Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet metal position and size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Optional extended equipment: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet metal layer detection and measurement Camera Inside Linear drive Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2024, Flatbed laser HD-F 3015, 15 kW laser cutting system Technical Details: • Max. sheet size: 12,000 mm x 2,000 mm • Max. sheet weight: 235 kg/m² • Laser power (IPG): 15 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting range: • Steel: 40 mm • Stainless steel: 30 mm • Aluminum (AlMg3): 30 mm Equipment: IPG 15000W fiber laser source (including cooler) Compact dust extraction system (filter) Air conditioning in the control cabinet Flatbed laser with automatic pallet changer Laser cutting monitoring Automatic laser head positioning CE-compliant pallet changer with light curtain safety system Control system: SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 Flatbed laser with pallet changer (automatic pallet changing system) Tube cutting device, side mounting, max. diameter 400 mm Sheet inspection (automatic sheet position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Kdsdpfx Asgyfm Eeh Aep Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Work area lighting Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Pierceline (piercing settings) Focusline Plasmaline Fastline Flyline Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, without additional costs

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials, such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. We would be happy to provide you with a free test using your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Knives: multiple rotation, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput 1 - 5 hopper loads / h, Hydraulically operated slide, Screen size as required (10 - 40 mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (oven-dry). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idle • Removable suction chute • Speed 70 - 100 rpm for higher throughput • Cyclic control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal part: 1200 mm Ascending part: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: Kdodjd Db N Ijpfx Ah Asp - The moisture content (oven-dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear.

Condition: used, 🔥 For Sale: Fröling P4 3–15 kW Pellet Boiler – Fully Automatic and Silent for Residential Buildings 🔥 The Fröling P4 3–15 kW is a high-quality, fully automatic pellet boiler – ideal for modern homes, passive houses, and well-insulated buildings. It offers whisper-quiet operation, minimal maintenance, and outstanding energy efficiency. ⸻ Key Features: 🌾 Fuel: Wood pellets ⚡ Output: 3–15 kW 🧠 Fully automatic feeding, ignition, and cleaning 🔧 Integrated control, low-noise operation 🇦🇹 Fröling – Premium pellet technology from Austria 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Efficient heating solutions for low-energy buildings. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories directly from stock We are a family-run business with around 20 years of experience in heating technology, operating a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermo ventilators Kjdpfxjwah Sbs Ah Aedp • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Automatic fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: In addition, we offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – covering both private and industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current stock can be found on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Inspection: Visits to our warehouse are possible by prior arrangement. If you are interested, please feel free to contact us – we are happy to help you find the right solution.

Condition: used, 🔥 For Sale: Fröling S3 15–31 kW Wood Gasification Boiler – Efficient and Affordable Wood Heating 🔥 The Fröling S3 is a well-balanced, high-efficiency wood gasification boiler with an output range of 15–31 kW – ideal for residential homes, smaller facilities, and agricultural buildings. It offers clean combustion, long burn times, and easy operation – all at an attractive price point. —— Main features: 🌳 Fuel: Split logs / Hardwood ⚡ Output: 15–31 kW 🧠 Wood gasification with optimized air management 🔧 Manual loading, spacious filling chamber 🇦🇹 Fröling – Austrian design focused on sustainability 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) —— 💼 Top Heating Systems – ProfiKazán Intelligent wood gasification systems for residential and commercial use. Kdsdpfx Ahsv Uw Ehj Asp TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Auger conveyors • Discharge units • Burners • Pumps • Comprehensive range of heating accessories ⚙️ Accessories and components: We also stock a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – suitable for residential to industrial applications. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional units that are not yet listed. 📅 Viewing: A visit to our warehouse is possible by appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: new, Year of construction: 2025, ♻ The model SD 45 is characterized by a low power connectivity, high productivity, ease to use with a long warranty period. ✔ Power: 15 kW ✔ Shaft length: 430 mm ✔ Shaft diameter: 160 mm Kdsdpfx Aoic U Dish Aep ✔ Shaft RPM: 265 rpm ✔ Number of cutting knives: 15 ✔ Granulation: 10-50 mm ✔ Capacity: up to 1,5 m3/h* ✔ Material discharge opening: 152 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, etc.) ✔ Filling opening: 620x430 mm ✔ Dimensions L/W/H: 0,95/1,08/1,91 m ✔ Weight: 920 kg 4 years warranty or 2000 working hours

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 2 m³/h, operating pressure: 13 bar, input voltage: 400 V, KTC KME 15 kW Screw Compressor Mounted on a 500 l pressure vessel With refrigeration dryer. 15 kW motor Kedpfx Aeyb Dbmeh Aedp Capacity 2.00 m3/min Pressure 10 bar Year of manufacture: 2017

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor ROTORCOMP screw stage, 15KW motor, Capacity 1.92 m3 / min, Pressure 10 bar, THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT WELDING. Kedpfeh Eu A Nex Ah Asdp WE PROVIDE REPAIRS AND SERVICE.

Condition: new, - NEW -Kanuk® OriginalHot air ovenNominal heat output: 15.4 kWDimensions: 80 x 58 x 95 cmheatable room volume: 450 m³Efficiency: 83.4%Log length: 48 cmFlue pipe connection: 160 mmTotal power (kW): 15.4Dimensions H x W x D (cm): 80/58/95Space heating capacity (m³): 450Flue pipe connection (mm): 160Flue pipe connection: top / rear viewing window (cm): 28 x 15Efficiency (%): 83.3Weight (kg): 148Exhaust temperature (° C): 216Log length (cm): 48Wood consumption (kg / h): 3.9Exhaust gas mass flow (g / s): 14.28Minimum chimney draft (Pa): 16Exhaust throttle valve: ing chamber H x W x D (cm): 40 x 44 x 49.5Ash box: e 1 (self-closing door): OptionalWindow flushing: YesBimSchV Level 2: YesLogs, wood briquettes: YesDIN EN number: 13240Brown coal briquette: No AT §15a B-VG Norm: YesPrimary, secondary, tertiary air: yesCE mark: YesOutside air connection (mm): 100LRVSwitzerland: yesNo. 2100102 Kdedpfx Ahsvwf Rke Aep

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) Ksdpedtm Ndjfx Ah Asdp 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: as good as new (ex-display), Year of construction: 2025, Exhibit available immediately: New variable Kaeser SK 25 SFC - 10 bar screw compressor Pressure: 10 bar Nominal power: 15 kW Delivery rate: 0.84 to 2.25 m³ / min Sound level: 68 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Ksdpfx Aek Adcajh Ajdp Weight: 337 kg Operating hours: 1.5 Visit our store. We always have a large selection of new and used compressors in stock!