Used Zps Depo Mctv 1060 Nt for sale (8,839)

Condition: new, ZERMA single-shaft shredders of the ZPS series offer versatile applications. They are suitable for the size reduction of heavy and bulky parts that cannot be directly granulated by a granulator. The large and heavy rotor of the ZPS shredder series, combined with the low rotor speed and high torque, ensures low power peaks, thereby avoiding high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the specific requirements, the shredded material can be used directly in the processing operation or can be further granulated in a downstream granulator. Gjdjyr I Ixjpfx Abfouf The shredders of the ZPS series are equipped with a two-stage hydraulic system that prevents rotor blockage. The knives and knife holders are completely bolted to the rotor. Generously sized, externally mounted rotor bearings and a hydraulically tiltable screen basket come as standard on every shredder. The machines can be equipped or upgraded with numerous options, such as rotor cooling or Hardox wear protection. Compared to ZSS shredders, the machines of the ZPS series are equipped with a higher pressure unit, which optimizes the feed between pusher and rotor, especially for large-volume parts or pipes.

Condition: good (used), KARDEX SHUTTLE Type No.: 250-1650x825-NT Permissible load: 2 x 10,000 kg 26 compartments Guodjzr N Nijpfx Abfjf Compartment load: 250 kg Dimensions W x H: approx. 2.00 x 4.90 m

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine will be partial reconditionned at our facility prior to delivery. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) Gsdpfx Abjzq Hiqjfouf 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust extra...

Condition: used, Year of construction: 2016, machine/vehicle number: V842A0096, Machine with SIEMENS Sinumerik 840 D control, serial number V842A0096, year of manufacture 2016. Max. bar diameter 42 mm, max. feed length 180 mm. 8 independently driven spindles, max. spindle speed 4,500 rpm, power per spindle motor 11 kW (total power 88 kW), max. spindle torque 66 Nm, drum indexing time per spindle position 1 s. Max. 8 longitudinal slides, max. 7 cross slides, 1 facing slide. Machine dimensions without peripherals approx. 7,100 x 2,400 x 3,300 mm, control cabinet dimensions approx. 5,000 x 600 x 2,300 mm. Machine weight approx. 18,000 kg, control cabinet weight approx. 2,500 kg. Bar feeder IEMCA PRA 52/P/33, year of manufacture 2018, serial number 021813EA02. With chip conveyor and filter system ZPS 925A1851C1F, year of manufacture 2016, serial number 0013. Without tools. Guedezqy Sljpfx Abfof

Condition: used, Year of construction: 2018, machine/vehicle number: V842A0141, Machine with SIEMENS Sinumerik 840 D control, serial number V842A0141, year of manufacture 2018. Max. bar diameter 42 mm, max. feed length 180 mm. 8 independently driven spindles, max. spindle speed 4,500 rpm, power per spindle motor 11 kW (total power 88 kW), max. spindle torque 66 Nm, drum shifting time per spindle position 1 s. Max. 8 longitudinal slides, max. 7 cross slides, 1 facing slide. Machine dimensions without peripherals approx. 7,100 x 2,400 x 3,300 mm, control cabinet dimensions approx. 5,000 x 600 x 2,300 mm. Machine weight approx. 18,000 kg, control cabinet weight approx. 2,500 kg. Bar loader IEMCA PRA 52/P/33, year of manufacture 2018, serial number 021809EA02. With chip conveyor, filter system ZPS 925A1851C1, year of manufacture 2018, serial number 0037, and cooling unit. Without tools. Guedpfx Abezqy Srofsf

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Gedpfx Abezp D H Dsfsuf Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Gujdpow Dcb Ssfx Abfjf

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Guedpjtwgirofx Abfef Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: ready for operation (used), Num Telemecanique display unit 1060 / 205202101 control panel SN:1470 with Nokia 44BE 14" monitor, used, normal signs of wear, 100% functional, delivery scope as per photos. Gujdpfx Abex Et Sdjfef

Year of construction: 2018, condition: like new (used), functionality: fully functional, Nussbaum lift table, type 2.5 NT, payload 5000 kg. Gujdpfx Abezmt N Asfsf

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Gjdeyfl U Nepfx Abfjuf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The used KONDIA HM-1060 high-speed vertical machining center is a medium-sized, numerically controlled machine with a cast iron gantry-type frame, weighing approximately 7,300 kg. It has travels of X 1,000, Y 600, and Z 510 mm, a table size of 1120×600, and a load capacity of 660 kg, with rapid traverse speeds up to 24 m/min. It features a cast iron structure with support on 3 points for improved thermal compensation, a SELCA 4045 CNC control with a color LCD, a network interface, a hard disk, a BT-40 spindle at 10,000 rpm, cooled by a dedicated chiller, an 18-position pick-up tool changer, a remote handwheel, and a chip conveyor. Guedpfxjzn U Ayj Abfef Year of manufacture: 2006, complete with manuals and certification.

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Gusdpszmxuwsfx Abfsf Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,930 mm, loading space width: 2,450 mm, loading space height: 1,300 mm, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Container Trailer Heavy-duty fine-grain steel welded construction Sliding container system: Container is loaded from the rear onto the sliding frame and pushed forward. Adjustable front container stop for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers. Gsdpfxezna Tdj Abfeuf Container locking system: * 2 pairs of recessed locking hooks * Pneumatic operation Heavy-duty turntable with ball-bearing ring. 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards Vertical rear impact protection (left and right) with Delta rubber buffers 1 spare wheel holder with mounting kit Lockable plastic toolbox with drawer and shelf (650 × 520 × 670 mm) # Drawbar Drawbar with certified 40 mm towing eye # Axles + Suspension SAF disc brake axles Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres on factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake Drive-away protection: parking brake is automatically activated when the container locking system is open Vehicle Stability System (VSS) 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 LED rear work lights, activated via reverse gear 2 × 7-pin front connectors with connecting cable # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation or painted in customer's preferred colour Drawbar KTL-coated in black

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor Guedoznlbaopfx Abfef - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,230 mm, total width: 2,200 mm, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,550 mm, number of axes: 3, This 3-axis Wele CV-1060 was manufactured in 2016. It features a table size of 1150 x 600 mm and impressive X, Y, and Z-axis travels of 1020 mm, 600 mm, and 600 mm, respectively. The machine is equipped with a 24-tool ATC magazine and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Wele CV-1060 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 600 mm • Rapid traverse (X/Y/Z): 36,000 / 36,000 / 36,000 mm/min • Electrical: 400 V, 30 kVA, 3-phase, 50/60 Hz, power line 22 mm² Gsdezmgrdspfx Abfsuf Additional equipment • Chip conveyor: screw type (coclea) • High-pressure coolant through spindle: 15 bar • Tool presetter: automatic contact type Technical Specification Taper Size BT 40

Condition: excellent (used), functionality: fully functional, turning height: 1,800 mm, workpiece weight (max.): 12,000 kg, turning diameter: 2,500 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, power of the servo motor: 55,000 W, CNC Fanuc 18i TB Turning diameter: 2500 mm Maximum turning height: 1800 mm X-axis travel: -200 to +2150 mm Ram travel: 1000 mm Ram section: 240 x 240 mm Gujdpfsznl Tpex Abfjf Spindle motor power: 55 kW Spindle rotation speed: 200 rpm Faceplate diameter: 2000 mm – 4 independent Morse tapers Maximum permissible weight: 12 tons Number of speed ranges: 2 Tool changer: 12 positions Moving cross slide USED MACHINE

Condition: used, mileage: 143,000 km, power: 88 kW (119.65 HP), first registration: 03/2016, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 3,100 mm, loading space width: 1,850 mm, loading space height: 350 mm, Year of construction: 2016, Equipment: ABS, crane, NISSAN NT 400 35.12 / 4x2 TIPPER 3,10 m Imported / accident-FREE YEAR OF PRODUCTION: 2016 MILAGE: 143 000 km EQUIPMENT ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? AIRCONDITION ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 310 x 185 x 35 cm (L x W x H) Godpfx Abszpdaqjfeuf CAPACITY: 3 500 kg TIRE SIZE: 195/70R15C WHEELBASE: 240 cm SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 6875

Condition: new, Year of construction: 2026, Offer "Comfort Model": * Equipped with a 4-axis rear stop, BendGuard, CNC-controlled wedge compensation, standard tool set, and hydraulic upper tool clamping – ensuring that tool changes are quick and easy. *The images shown are examples and may not reflect the standard scope of the offer. Please contact us for offer details and further information. About the machine: Do you want to enter the world of TRUMPF bending technology while covering a broad spectrum of possibilities? Then the TruBend 1000 is the ideal machine for you. The focus here is on the essentials: reliability, ease of operation, high precision, and, of course, the highest TRUMPF safety standards. With its robust system design, high-quality components, and an easy-to-understand programming system, the TruBend Series 1000 offers ideal conditions for your entry into the TRUMPF bending world. It is ideal for bending box-shaped parts in small and medium batch sizes. Direct and intuitive operation With the TRUMPF control system, numerical and graphical programming is quick and easy. Precise bending Godpfeiwxfisx Abfsuf Thanks to the 4-axis rear stop, you can position and bend even complex components with precision. TRUMPF quality All over the world, our fast remote service support takes care of your concerns. You can find further technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our 100-year company history, we have been involved in the design of many thousands of sheet metal products, especially in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts for software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We are also happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are at your side with both financial and entrepreneurial challenges.

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 Godpfxowwl Nls Abfjuf SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: vwasxtf24k7223482, mileage: 103,630 km, first registration: 05/2019, fuel type: diesel, empty load weight: 2,280 kg, maximum load weight: 1,220 kg, overall weight: 3,500 kg, tire size: 195/70 R 15C, tire condition: 80 %, axle configuration: 4x2, wheelbase: 2,550 mm, fuel: diesel, energy efficiency: A+, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 4,900 mm, total width: 1,890 mm, total height: 2,250 mm, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 1,100 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, central locking, fog lights, onboard computer, VEHICLE WITH A BURNT PART OF THE ELECTRICAL SYSTEM ON THE ENGINE SEE PHOTO THE ENGINE RUNS BUT DOES NOT START MAKE: NISSAN TYPE: SARACCO THREE-WAY TIPPING VAN MODEL: NT400 REGISTRATION DATE: 05/2019 MILEAGE: 103,630 km POWER (HP/KW): 130 HP EMISSION STANDARD: Euro 6B INTERNAL REF.: 76312 CONDITION: Used ABS-AIR CONDITIONING - ELECTRIC WINDOWS - START & STOP - MULTIMEDIA RADIO _____ ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED. OUR SALES STAFF ARE AVAILABLE FROM MONDAY TO FRIDAY FROM 8.30 AM TO 6.00 PM AND ON SATURDAY FROM 8.00 AM TO 12.00 PM. TO REACH US BY CAR, TAKE THE A31 MOTORWAY EXIT FOR THIENE; BY TRAIN, GET OFF AT THE THIENE TRAIN STATION. Gedpfszl U R Eex Abfsuf Dealer: Trucks Italiana srl

Condition: used, Year of construction: 2000, Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 NYear 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gujdpfxor H N U Hj Abfef

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT Gusdpjum R T Sefx Abfsf - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 1,580 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, KARDEX SHUTTLE 250 - 1250X825-NT GREY IN COLOUR 45 TRAYS Gujdpfxowtqz Ej Abfjf TRAY DIMENSIONS 1250MM X 825MM AUTOMATIC HEIGHT ADJUSTMENT FOR TRAYS WHEN ENTERING MACHINE 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT INTO ANY HEIGHT RESTRICTIONS

Condition: used, functionality: fully functional, machine/vehicle number: 250-1850X825, total height: 6,300 mm, total width: 2,030 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: safety light barrier, KARDEX SHUTTLE 250-1850X825-NT 1 AVAILABLE GREY IN COLOUR Gsdpfjwtqxdex Abfeuf TRAY WEIGHT 250KG NUMBER OF TRAYS 45 TRAY DIMENSIONS - 1850mm x 825mm AUTO ADJUST TRAY HEIGHT PER TRAY 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT ANY HEIGHT RESTRICTIONS