Used 190 for sale (2,149)

Condition: ready for operation (used), SEW-Eurodrive KHF47 DT71D4/BMG/TF motor SN 01.1200190101.0003.07,used, minor signs of wear, 100% functional, scope of delivery as per photos Rcsdpfx Alsqm Sqljaef

Condition: ready for operation (used), Fanuc A06B-0753-B190 AC spindle motor, serial number as shown in the photo, hole spacing of mounting holes: 130 x 130 mm, drive shaft diameter: 28 mm, used, with normal signs of wear, 100% functional. ATTENTION: Please request a separate quote for packaging and shipping costs! Rjdpfxsi D H Ngo Alaecf

Condition: ready for operation (used), Groschopp WK 1735309 gearbox motor with brake, serial no. 9019059, with gearbox VE 31-K-R-31, gear ratio i = 5, mounting hole spacing: 46 x 46 mm, drive shaft diameter: 10 mm, used, minimal signs of wear, 100% functional, scope of supply as shown in the photos. Rcsdpoi D H U Tefx Alasf

Condition: ready for operation (used), Overbeck / Marposs 6830219002 Operator Panel, used, minor signs of wear, 100% functional. Redpfx Aei Eccbelaecf

Condition: new, Year of construction: 2025, Chip extraction unit ASA 1903 Mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) The extraction unit can be rotated by 180°, allowing extraction from below or above Sturdy metal fan impeller Comes standard with a high-quality chassis for better stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 110 l External diameter of extraction nozzle, inlet 203 mm External diameter of extraction nozzle, outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/Depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data No-load speed 2950 min¯¹ Power consumption 1.5 kW Connection voltage 400 V Rcedpfxshk S She Alaof Mains frequency 50 Hz Filter Filter area 1.92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Filter bag, chip bag Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Pepperl + Fuchs K-System IVI-KHD2-4HRX, Part No. 040190, evaluation unit SN 9 799 552, unused, 100% functional, delivery as per photos. Rcodoy R Iv Uspfx Alaef

Condition: used, mileage: 473,786 km, power: 228 kW (309.99 HP), first registration: 02/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, wheelbase: 5,100 mm, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, CERTIFIED PRE-OWNED, Standard model, color: Moss Green IC 099, permissible total weight: 18,000 kg, fabric seats, leaf spring air suspension. Errors and omissions excepted. Sale only to commercial customers. Rcodeza Nptspfx Alajf

Condition: good (used), Year of construction: 2012, Sepro SR Axxes7 S3 x=400 mm y vert=800mm Z(horiz.)=1500mm +C +A(R1, R2) year 2012 Stock: 1 · price: €11,500.00 contact: Mr. Rainer Eckerle Rcsdpfx Alozkkkrjasf

Condition: ready for operation (used), Siemens 6SC6190-0FB01 power module 462 019.9051.01 D E F serial number: 103096, used, in good condition, 100% functional, scope of delivery as per photos. Rcsdpfx Aey Nr I Eelaof

Condition: used, Year of construction: 2002, Injection molding machine, Battenfeld TM 3500/1900, year of manufacture 2002. Rodozcm Hhopfx Alascf

Condition: used, Available quantity: 10 units Used Balluff network module for industrial Ethernet and fieldbus applications. Rsdpfx Ajzmm H Islajcf Manufacturer: Balluff Product type: Network module Model: BNI006C 1902HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Protection class: IP67 Suitable for: Connecting sensors and actuators

Condition: used, functionality: unexamined, Ferwood Code: AGG0082 - Manufacturer Code: 2-056-11-2190 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 3 kg, 36x26x21 cm. Rodpfxevu A Hqj Alaocf

Condition: used, This listing is for a Bioquell Clarus L Hydrogen Peroxide Vapour (VHP) Generator. The unit is in full working condition and ready for immediate use. A mobile system designed for surface bio-decontamination of labs, isolators, and equipment, providing 6-log sporicidal reduction Rjdpfx Aley D T Ngjajcf

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm / 2 x 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 110 l Filter cleaning: manual Motor power: 1.5 kW Machine height: 1000 x 500 x 2100 mm (L x W x H) Weight: 39 kg Rsdpfxev N Tydo Alaocf

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Capacity: 1,900 L Type of stainless: AISI 304 Rjdpfxjzunpto Alascf Internal Pressure: -1 bar Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Rcodpfxezv Ul De Alasf Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: used, Year of construction: 2026, in use with combination 03/08 WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soils, trenches, slopes, and backfills in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel have to stand directly in the trench. Important areas of application and functions: Trench construction + utility zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Rcjdpfx Alszv Rd Neasf Gardening and landscaping: Soil compaction in narrow or difficult locations. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: new, functionality: fully functional, fuel type: diesel, Year of construction: 2025, Equipment: new trailer mounted 190cfm diesel engine rotary twin screw air compressor Make/model: MCWEL MC190S-I Free Ris Delivery : 190cfm Rcjdpfx Alox Izktsajf Working Pressure :100psi Engine make/model: Isuzu 4JB1ZY-01 Rate output: 50kW , 2500rpm

Condition: new, empty load weight: 971 kg, maximum load weight: 1,729 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.3 m³, color: grey, construction height: 2,560 mm, working width: 2,260 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2700K RAMP/ DOOR COMB I DRIVING GRID 350X170X190CM VIEHANHÄNGER RAMPENGUMMI LÜFTUNG INNENLEUCHTE TECHNICAL DATA: - Make: Vezeko - Model: VT 2700K - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (L x W x H): 350 x 170 x 190 cm - Exterior dimensions (L x W x H): 516 x 226 x 256 cm - Floor loading height: 51 cm - Perm. Total weight: 2,700 kg - Unladen weight: 971 kg - Payload: 1,729 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals: 8 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: aluminium chequer plate mudguards - Standing area: 5.95 m - Double deck:No - Driving gate: Yes - Cross partition inside: Optionally available - Window:Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, checker plate covered and tread strips - Interior light: Yes - Rear lighting:Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear marker lights - Plug for lighting: 13-pin - Vehicle documents:COC papers DESCRIPTION: - Aluminum checker plate tub edged, welded on screen-printed wooden floor - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized, welded tarpaulin frame - ventilation opening at the front - 2 side struts for additional stability - ventilation opening 2x pair, on the left and right side, barred from the inside - rear portal, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at rear with switch - tarpaulin completely closed at rear over tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated step strips - 1400 mm drive grid, rear, aluminium swivelling - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - automatic reverse drive. plug - reversing lights - large dimensioned safety lighting - integrated rear fog light - rear lane departure lights - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - drive grille - transverse separation - interior light - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vl Rcsdpfsu Ht Awsx Alaef

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling - Number of Axes: 3 (X / Z / C) - C-Axis: Included - Live Tooling: 8 Driven Tools - Bar Feeder: Included - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm Rcjdpezvfrusfx Alasf - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex J-200 500U • Control: Mazatrol Matrix Nexus 2 • Year: 2014-05 • Serial No.: 255239 • Cutting time: 8,867 hours • Network: LAN connection • Condition: The machine is in very good technical condition with extremely high precision. Rcedpfxszwhdvo Alaof • Max. turning diameter: 530 mm • Max. turning length: 500 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 450 mm • Y-axis: 200 mm • Z-axis: 550 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW (increased power) • C-axis: 360° with 0.001° indexing Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant (liquid/air) B-axis • Angular range: -30° to -190° • Full indexing Tooling, Magazine and Additional Equipment • Tool magazine: 72 positions • Tailstock: MT5 Auto • Chuck: Hainbuch Ø65 collet chuck • Tool measurement: Yes (measuring arm) • Parts catcher: Yes • Chip conveyor: Mayfran • High-pressure pump: 15 bar • Bar feeder: Irco ILS-MUK-7012 Machine Condition and History • The machine is fully operational and functions as it should. • No alarms or critical faults. • Smooth movement on all axes. • Spindles run smoothly without vibration. • Linear guides and ball screws are in good condition. • Hydraulic and pneumatic systems operate normally. • Regular in-house servicing. • Lubrication system OK. • The machine is clean and well maintained. Included Documentation • Photos of the machine • Video of the machine in operation • Screenshot of service history • Electrical diagrams on CD • Manuals on CD Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 500 mm length • 72 tool positions – rare and highly attractive • Through-spindle coolant (liquid/air) • Integrated robot interface (Smartshift BASE) • Irco bar feeder • Hainbuch collet chuck

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Rcodjzw Ngxopfx Alaof Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: excellent (used), Eccentric press Inventory no. Manufacturer: Mios Type: 10 S Pressing force: 10 tons * Stroke adjustment: 5 to 55 mm * Adjustable ram: 30 mm * Installation height: 210 mm * Overhang: 135 mm * Table area: x mm * Stroke rate: 190 min. * Foot/two-hand operation * Central lubrication * Machine weight: approx. 750 kg Rcjdszw Egnepfx Alajf In very good condition!

Condition: reconditioned (used), ATLAS COPCO C190 step, part number 1616734580 Rodpfxszcxtme Alaecf AIA number: 1455196

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: Rcsdpszxg Iisfx Alajf - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)