Used K 600 for sale (44,987)

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Itedpsylbz Sefx Adkeg

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Itodpsuaq D Ajfx Adksg Max. working thickness: 60 mm

Condition: new, functionality: fully functional, Features of the system: 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Technical parameters: 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg Itodok Dz Hwopfx Adkog 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm Itedpfx Aek Abufsdkeg height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): Depending on the following band, please contact us Drive:no motor, both sides Transmission possible, two belts one Motor Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm Itsdpfx Ajk Abc Ssdkeg belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: will be changed Year of construction: 1999 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Isdpjk Abtpsfx Adkotg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Itedpok Abf Uofx Adkog Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2026, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. Itjdpfxjy Drm Rj Adkjg For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, Renishaw RMP600 3D probe, SK40, including case Isdpey Dibfofx Adkotg Condition: used (functional)

Year of construction: 1995, condition: good (used), 600 mm Rotor width Iodefxg Dljpfx Adkjtg 7,5 kw Motor 650 U/ min

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection Itsdpoy Erwfjfx Adkog - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: used, Year of construction: 2025, Probst Verlegemaschine QUICKJET QJ 600 e — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Iodpfoy Aa Exjx Adkjtg - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - The product image shows a comparable unit in new condition — the actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 3.100 plus VAT | EXW Einbeck | Delivery on request

Condition: excellent (used), Year of construction: 2013, Automatic profiling planer Weinig Powermat 600 net price €68,800 Technical data Year of manufacture: 2013 Working width (with cutting circle 93 - 125 mm): 20 - 230 mm Working height (with cutting circle 93 - 125 mm): 10 - 120 mm 7 spindles First bottom horizontal spindle, 5.5 kW (7.5 HP) motor First right vertical spindle, shared motor with left vertical spindle: 11 kW (15 HP) First left vertical spindle, shared motor with 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First top horizontal spindle: 7.5 kW (10 HP) motor Second top horizontal spindle: 7.5 kW (10 HP) motor Second bottom horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, infinitely variable adjustment 5 - 30 m/min. Feed motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors IE2 rated. All spindles with high rotational precision. PowerLock standard equipment. Jointing table length: 2 m (incl. longitudinal fence) Marathon Coating for the machine table and fences Special coating protects table segments and fences from excessive wear. Recommended for processing abrasive materials (e.g. tropical woods, MDF, chipboard). ADDITIONAL MACHINES AVAILABLE FOR SEPARATE PURCHASE AT THE FOLLOWING NET PRICES: 1. Weinig Rondamat 960 Powerlock (automatic straight knife and profile grinder) net price €15,300 Specification: Profile grinder: Weinig Rondamat 960 Powerlock / HSK. High-precision knife grinder for sharpening straight knives and profiling with template. Grinding of straight knives in the cutter block. Manual grinding of profiles and straight knives. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: ceramic 5 mm, borazon 10 mm Grinding wheel bore: 60 mm Tool diameter min./max.: 100 mm / 300 mm Max. tool width: 240 mm Wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial (back): 10–30°, Axial: 0–20° For rotary heads up to 60° Coolant tank approx. 50 liters Table feed: 0–240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding PowerLock tools Itedoytd S Nspfx Adkjg HSK quick-change tool holder Radial table clamping with fine adjustment, max. tool width 240 mm 2. WEINIG OptiControl 970095 Tool Measuring Station net price €7,650 Specifications: Min. tool diameter: 90 mm Max. tool diameter: 300 mm Tool length: 0–240 mm Radial measurement range (radius): 150 mm Non-contact measurement of tool dimension, radius (R) and height (H), displayed on electronic digital readouts Electronic digital displays for tool radius and height HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 Adapter, arbor D=50 x 260 mm 3. Weinig Template Maker Isel 3020 Copy Milling Machine net price €1,700 Applications: Profile milling Manufacturing templates for tools for further machining, e.g. on Weinig Rondamat 4. POWERLOCK SHAPER HEADS price €7,500 Two cabinets fully equipped with approximately 45 shaper heads for various applications

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) Itsdpfoy A Ewtsx Adkog ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: used, mileage: 138,655 km, power: 100 kW (135.96 HP), first registration: 10/2005, fuel type: diesel, overall weight: 5,990 kg, next inspection (TÜV): 05/2028, color: orange, gearing type: mechanical, emission class: euro4, Year of construction: 2005, Equipment: air conditioning, Internal vehicle number: G300104 German vehicle On our premises in Kaufungen - Kassel, available immediately More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   VIDEO:     TV Inspection System RCA RAUSCH ELKA 600 Year of manufacture 2005 See entire equipment in pictures and video   Financing example: * Internal number:      G300104 * Purchase price:      29,900.00 € * Down payment:      10% * Term:      60 * Monthly installment:      468.31 € Residual value:      5,980.00 € If you are interested in the offer or want to adjust this to your needs, contact us (Mr. Enchev). We look forward to your call     Errors excepted   We are happy to take your used vehicle in trade. Itsdpfov Rt T Tex Adksg Financing directly at our premises possible. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH Itsdpspa Nxdsfx Adkog

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Itodpfxogcbwge Adkeg

Condition: excellent (used), mileage: 420,998 km, power: 427 kW (580.56 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 4,700 mm, loading space width: 2,550 mm, Year of construction: 2017, Equipment: retarder, trailer coupling, = Additional options and accessories = - Aluminium fuel tank - Low noise - Intarder - Alloy wheels - Reversing camera - Sun visor - Toolbox - Xenon lighting - Towing hitch = Further information = Itsdpfjywirkox Adkjg Axle configuration Front axle 1: Steering Front axle 2: Alloy wheels Rear axle 1: Alloy wheels; Lift axle; Steering Weights Unladen weight: 21,675 kg Payload: 15,325 kg Gross vehicle weight: 37,000 kg Functional Body brand: HMF 4020-K6 + JIB FJ 600-K4 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional Itodpfxjvnq H Es Adkog No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw Iedpfxegwt S Es Adkstg • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: excellent (used), mileage: 3,650 km, power: 390 kW (530.25 HP), first registration: 06/2024, fuel type: diesel, fuel: diesel, color: grey, gearing type: automatic, emission class: euro6, loading space length: 7,850 mm, loading space width: 2,550 mm, loading space height: 3,950 mm, Year of construction: 2024, operating hours: 50 h, Equipment: AdBlue, crane, = Additional Options and Accessories = - PTO (Power Take-Off) = Further Information = Unladen weight: 17,593 kg Payload: 10,407 kg gross vehicle weight: 28,000 kg Mast: Telescopic (10 sections) Lifting capacity: 7,560 kg Superstructure brand: HMF 4020 K-6 + FJ 600 K-4 CE marking: Yes Technical condition: Very good Visual condition: Very good MERCEDES 2553 6X2 TRACTOR UNIT WITH HMF 4020-K6 + FJ 600K 4 JIB + WINCH EURO 6 L PACKAGE 530 HP DRIVE 6X2 AIR SUSPENSION WHEELBASE 345 CM AUTOMATIC TRANSMISSION WITH RETARDER STYLELINE CAB WITH AIR CONDITIONING, NAVIGATION Itjdjyvv S Ijpfx Adkjg HMF 4020-K6 CRANE + FJ 600K4 JIB 10X HYDRAULIC EXTENSION RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT 31 METERS MAX LIFTING CAPACITY 7,560 KG MAX LIFTING CAPACITY AT 27 METERS 430 KG 4X OUTRIGGERS 5th AND 6th FUNCTION FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Isdeiq U A Sspfx Adketg ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 2004, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Midac, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,400 mm, Weights Empty weight: 3.212 kg Functional Lifting capacity: 1.600 kg Number of valves: 3 Supply voltage: 48 V Ijdoyu T I Nepfx Adkjtg CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Sideshifter Additional information Please contact Bas Sindorf for more information

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm Ijdpfx Aodbp Eqsdketg cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Iedpjxxxqvofx Adketg Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid