Used Radmulden Vfr-So for sale (3,760)

Condition: used, machine/vehicle number: 981.250, Year of construction: 1999, weight max.:900 kg Load Arm:900 mm stroke:ca.750 mm battery:24 V Ndsdscxxqgjpfx Aa Rsa weight of the machine ca.:2,2 t dimensions of the machine ca.:2,40 x 0,85 x 2,10 m

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Ndodpfei Ri Hcex Aa Rea Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Year of construction: 1998, condition: good (used), Through-flow spindle oil cooler Manufacturer: SCHMIPKE, Type: DK34-V/SO, Year of manufacture: 1998 Previously installed in a CNC machine. Ndsdpfxod Nmnus Aa Rea 2 units available. Price per unit. Dimensions: Length 1.4m, Width 0.5m, Height 1m, Weight approx. 250kg.

Condition: good (used), Year of construction: 2004, fuel type: electric, 4-way electric forklift, manufactured by HUBTEX, type MQ120 SO, year of manufacture 2004. Load capacity: 12,000 kg. Lifting height: 2700 mm. Fork length: 1700 mm. Operating hours: 8990. Ndsdpfjdgp U Sox Aa Rsa

Condition: used, Year of construction: 1976, pressure 20 t Nedpfxjtqqwuo Aa Rjda throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Ndsdsdzp Tropfx Aa Rsa Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: excellent (used), Special accessories for DECKEL SO + SOE tool grinding machines: - 1 milling cutter special holder in very good condition o for grinding shank milling cutters with a diameter of 16 – 25 mm and with a Morse taper socket MK 1, MK 2 + MK 3 o Milling cutters with a shank diameter of 25 mm can be directly inserted o Through-hole max. 25 mm Price: €950.00 net - New collets for milling cutter special holder: - 1 set of collets for milling cutter special holder, inner diameter Ø 16, 18 and 20 mm, price: €129.00/piece net - 1 set of collets for milling cutter special holder, inner square □ 8, 10 + 12 mm, price: €145.00/piece net - 1 set of Morse taper sockets MK 1, MK 2 + MK 3, price: €245.00/piece - New cup grinding wheel Ø 80 mm, price: €40.00/piece net - 1 brand new knurled nut for clamping collets with a saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All of the above prices are net prices plus statutory VAT. Njdpectyh Uofx Aa Rjda Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2013, Scissor lift table with ramp, platform 1.50 m x 0.77 m, 500 kg – used – : Ex-works price: only €1,250 (net), dismantled, packed, and loaded! Manufacturer: Intraboss Model: ELS 0.5 10-5G-SO Year of manufacture: 2013 Load capacity: 500 kg Nsdpfx Aaswxvzns Rjda Platform size: Depth: approx. 1.50 m Width: approx. 0.77 m Overall height: approx. 20 cm Lift height from floor: approx. 1.17 m Own weight: 300 kg 400V, control voltage 24V, 1.1 kW, IP 54 Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 26230 Nodpfx Aaey Drkco Reda Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs are to be covered by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: reconditioned (used), Year of construction: 1996, Tool and cutter grinder Make: Deckel Model: S0 Year of manufacture: 1996 – workshop tested Machine no.: 26617 Nedex Hx Elepfx Aa Roda Accessories: - Grinding wheel with flange - Operating manual Used as seen The machine technically corresponds to the condition of its year of manufacture.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,041 h, load capacity: 11,000 kg, lifting height: 5,770 mm, fuel type: electric, mast type: triplex, construction height: 3,275 mm, drive type: Elektro, Reach truck Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Ndsdpexgmcisfx Aa Rea Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 80V Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Ndjdpfx Asyx Etgea Rea Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Nedpew Tpq Dofx Aa Rsda Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: excellent (used), Year of construction: 2017, Schneider Ozga strapping machine for strapping parcels Nedpfxstyytpo Aa Rsda

Year of construction: 1981, condition: not inspected (used), Feinbau Precision lathe S1-So/KA 40 -WKG 986- Offered here is a fully automatic precision lathe from Feinbau. Technical data: Manufacturer: Feinbau Type: S1- So/KA 40 Year of manufacture: 1981 center height: 134mm Ndedpfshg Nm Rjx Aa Rsa Swing over bed: 272mm Max. turning length: 200mm Chuck: Ø 110mm (3jaws) quill feed: 140mm (tailstock) Usage: The machine is suitable for boring or reaming cylindrical turned parts. Accessories: Loading magazine for cylindrical turned parts 28mm Ø 40mm long. loading device Internal cooling device

Condition: excellent (used), Year of construction: 1995, Chamfering unit, suitable for BIHLER GRM 50 or GRM 80 Nsdpei Tza Uofx Aa Rsda wire diameter range: 2,5 - 5,5 mm

Condition: good (used), Year of construction: 2001, Lifting capacity: vertical 400/550 kg, horizontal 400/550 kg. Includes 4 additional suction cups for lateral extension, if required. External dimensions: Nedpfx Aexyqiyea Reda Width: 2200 mm. Height: 1800 mm. Depth: 1150 mm. Weight: 224 kg. Condition: good, second-hand

Condition: used, empty load weight: 3,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2006, suspension: air, tire size: 385/55 R22,5, wheelbase: 1,410 mm, color: grey, Equipment: ABS, Disc brake EBS Payload 14,460 kg Extendable rear Ndsdpfx Aoww Ip Uja Rea DC axles Subject to errors and omissions

Condition: used, Year of construction: 1992, second handMake HessType SO-1992-811Year of construction 1992Track length approx. 3200 mmBand width approx. 250 mmMotor 0.25 kWRequired space approx. 3250 mm x 800 mm x 1600 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaulwithout guarantee and warranty Ndodpfevwf H Ssx Aa Rea

Year of construction: 2007, condition: used, welding machine KVT MT 01-HAT SO, with Rotary table, year: 2007 - 0 working hours, price: 8.800 €, contact: Mr. Rainer Eckerle Nsdocquugopfx Aa Rsda

Condition: used, Year of construction: 2018, total length: 4,160 mm, lifting height: 220 mm, load capacity: 6,000 kg, Warehouse technology Genkinger EFU 60-SO Drive Electric Ndedpexd Hbyefx Aa Rea Year built 2018 Lifting height (mm) 220 Lifting weight (kg) 6,000

Condition: new, Year of construction: 2019, total length: 2,760 mm, lifting height: 3,010 mm, load capacity: 2,800 kg, Warehouse technology Baka EFV 2500 SO Ndjdoxd Hnaopfx Aa Roa Drive Electric Year built 2019 Lifting height (mm) 3,010 Lifting weight (kg) 2,800

Condition: used, Year of construction: 2010, total length: 3,220 mm, lifting height: 195 mm, load capacity: 5,000 kg, Gabeln: Nodpfx Asxdn A Soa Rjda Ik-ik 160mm, ak-ak 580mm, Gabeln L=2400mm, B=210mm, H=75mm

Condition: new, Year of construction: 2009, total length: 4,460 mm, lifting height: 190 mm, load capacity: 6,000 kg, Gabeln L=3500mm, B=320mm, H=80mm Ik-ik 745mm, ak-ak 1380mm, Ndodpfxoxd Hwbs Aa Rsa

Condition: new, Year of construction: 2013, total length: 2,200 mm, Tugger Genkinger EGS 900-SO Ndodpfx Aaoxd D U De Rsa Drive Electric Year built 2013