Used Abus Ef80/112 Und S11148 for sale (6,591)

Condition: excellent (used), For sale: Professional ABUS electric hoist with a lifting capacity of 3.2 t, including the original ABUS 3.2 t hook block and an automatic Conductix Wampfler cable reel. The set was removed from an operational facility. Complete set for installation on an overhead crane or transport system in a production hall. Crjdpfjytymcox Acmof Hoist Technical Data • Manufacturer: ABUS Kransysteme GmbH • Lifting capacity: 3.2 t (3200 kg) • Model: GM 1032 • Year of production: 1993 • Lifting height: approx. 6 m • Rope diameter: 7.5 mm • Number of falls: 4/1 • Lifting speed: 1 / 5.3 m/min • Power supply: 380–415 V / 50 Hz • Insulation class: F • Protection class: IP54 Hook block • Manufacturer: ABUS • Lifting capacity: 3.2 t • Swivel hook • Designed for use with ABUS hoists Cable reel • Manufacturer: Conductix Wampfler (Delachaux Group) • Max. voltage: 400 V • Protection class: IP55 • Max. current: 22 A Condition • Device dismantled from a working installation • Complete set as shown in the photos

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: Crsdpezd Sqaofx Acmof * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Coburg Exaflex 6126’ treatment chair. Item for sale: Crsdpfx Aox S E I Rocmof 1 x Coburg Exaflex 6126br /> Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2023, operating hours: 330 h, load capacity: 1,200 kg, lifting height: 2,900 mm, free lift: 100 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, fork length: 1,150 mm, empty load weight: 966 kg, total length: 1,933 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Chassis number: 906xxxxx Load center: 600 Mast type: Standard Transmission: AC impulse Condition: Refurbished, without warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load rollers, polyurethane, tandem Rear tire type: Polyurethane Crodpfx Acjzcrytemof Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2023 Description: Serviced, technically and visually refurbished, safety inspection passed, without warranty/liability for defects Impulse control, initial lift, Creep speed button, display with hour meter and discharge indicator, built-in charger, battery (04/2023) with Aquamatik, basic lift (radar lift)

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS20, 1 ABUS LW wall-mounted slewing crane 250 kg load capacity / lifting capacity Jib length 3m + 0.6m extension (removable), 250kg load capacity With Abus Hitachi chain hoist, load capacity 250kg Crsdpfx Aoywfhujcmof Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable drag, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is completely dismantled and immediately available Shipping by freight forwarder or pickup Please inquire about shipping costs by postal code

Condition: good (used), Special tool Moto Guzzi Suzuki Aprilia with perforated wall system dismantled ready for loading invoice with VAT shown Crsdpfxotvfd De Acmsf

Condition: used, Year of construction: 2014, power: 28 kW (38.07 HP), number of chambers: 5, Capacity: The oven has six independently controlled baking compartments (baking trays or levels). This allows different products to be baked simultaneously with different temperatures and baking times. Operation: Each of the six compartments is equipped with its own, individually programmable digital control panel on the left side (as shown in image_0.png). Each panel has a display and buttons for setting time, temperature, and possibly other parameters. Construction: The oven is robustly constructed with a black metal housing and an illuminated hood bearing the inscription "WACHTEL INFRA." On the right side of each level, there is a lever for operating the door or steam inlet of that specific compartment. Interior: Each compartment has a flat baking surface, possibly lined with stone or a metal baking sheet, as shown in image_2.png. Csdpjzbr U Isfx Acmsrf

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Made in Germany Crodpfxoc Rfg Uo Acmjf Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Year of construction: 2016, condition: new, machine/vehicle number: 16-PMME-01, A single-sided polishing machine for manual operation, used for polishing parts made of aluminum, steel, stainless steel, brass, and zinc die-cast, is for sale. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Height to polishing shaft: 1,100 mm Extraction port: Ø 100 mm Dimensions (L x W x H): 600 x 600 x 1,500 mm Weight: approx. 150 kg Connection voltage: 3 x 400 V Connection power: 4 kW Made in Germany Warranty: 12 months Csdpfxoc Rwngo Acmsrf Optional: An extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control; 1 main switch.

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Credpod Dt D Iofx Acmof Two units are available.

Condition: used, Year of construction: 2012, machine/vehicle number: RPM 1000 D, Used robots - polishing machines P 1000 D Type: P1000 Crodpexludxjfx Acmof Right-hand version Polishing discs Ø 1000 mm

Condition: used, Year of construction: 2010, machine/vehicle number: RPM 1000 ZO, Used robots - Polishing machines P 1000 ZO right-hand design Credpoxludlofx Acmjf Polishing discs Ø 1000 mm With feed and oscillation

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Credezdc D Sopfx Acmsf Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Crsdpfxsx Ev Tks Acmof Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: KA20+23, ABUS Crane Overhead Crane Bridge Crane Indoor Crane Crsdpfx Acsxdv Nmomef The crane is available twice in identical construction!! Optionally available: 2x 20m HEA220 crane rails, 4 supports (window side), and 20m Vahle conductor rails Load capacity / lifting capacity 1t - 1000KG Track gauge 9500mm, external dimension approx. 9750mm Year of manufacture: 1990 with pendant control Lifting height 6m Hoist: GM chain hoist, 4m lift Construction height (top edge of crane to hook) approx. 600mm End carriage length with buffers approx. 220cm Crane is dismantled and immediately available Very good condition, inspection book is available Column slewing cranes and wall slewing cranes are also available Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight possible, please enquire with postcode Collection preferred

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 14/474591, total length: 5,500 mm, total width: 2,170 mm, load capacity: 2,000 kg, working height: 4,000 mm, Abus 2,000 KG single-girder overhead crane in very good condition. - Span: 5300 mm center-to-center - Lifting capacity: 2,000 KG - Lifting height: 4 m - Year of manufacture: 2000 - Control: radio-controlled - Hoist: Abus GM5 chain hoist Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. Csdpfey Ux Dkox Acmorf We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling power feeds Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 110-014358, total length: 6,000 mm, total width: 2,240 mm, load capacity: 12,500 kg, working height: 6,000 mm, Abus 12,500 KG single-girder overhead crane in very good condition. - Span: 5740 mm center-to-center. - Lifting capacity: 12,500 KG - Lifting height: 6 m - Year of manufacture: 2011 - Wired control Delivery, customization, installation, inspection, and commissioning are all possible upon consultation. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists Cjdpsy Uwubefx Acmjrf - Demag KBK rails and accessories - Traveling cables Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl

Year of construction: 2012, condition: used, Max. Saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangular 380x70m Cutting capacity 45° left Round 180mm, Square 150mm; Rectangular 290x70mm Cutting capacity 45° right Round 180mm, Square 150mm; Rectangle 290x70mm Digital grade display for the saw table Csdpfx Acszabmqomerf Cutting table swing range 180° Spray device 2-Hand-Bedienung

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The bidirectional constant current source is designed for battery cycling and can apply or measure voltages from 0 to 20 V and apply or measure currents up to 3 A. The constant current source can operate as a current source (positive current) or as a load (negative current). LAN and USB are available as interfaces. The device was supplied with various additional functions. The NGM-K103 Digital Trigger I/O option enables the connection of the device to external measuring devices, and the NGM-K104 DVM option enables the use of an independent digital voltmeter. With the NGM-K106 Battery Simulation option, the constant current source can simulate the currents and voltages of a battery. Bidirectional power supply, max. voltage 20 V, max. current 3 A, 60 W power, interfaces: LAN and USB, available options: NGM-K103 Digital Trigger I/O, NGM-K104 DVM option, NGM-K106 Battery Simulation Crodpfx Acsytrnfjmsf Includes power cable, USB cable.

Year of construction: 2020, operating hours: 6,134 h, condition: like new (used), functionality: fully functional, We are offering this like-new Bedo and Lantech carton erector/carton sealer with a conveyor system, manufactured in 2020. Manufacturer: Bedo and Lantech Model: Carton erector/carton sealer/conveyor system Year of manufacture: 2020 Crodpfxozbix Ds Acmsf Condition: like new Machine type: Carton erector/carton sealer If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2014, condition: good (used), Load capacity: 2000 kg Width: 3850 mm Cjdpfx Acsy Uurwjmjrf Height: 400 mm Depth: 130 mm Weight: 5,9 kg Condition: good, second-hand

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m Crjdey T Hfgepfx Acmsf – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Condition: ready for operation (used), Year of construction: 1999, Load capacity: 2500kg, span: 18,600mm, weight including trolley: 3090kg, operating mode: floor control via push-button pendant, control system: electric, number of crane travel wheels: 4, wheel diameter: 160mm, micro-speed crane travel: 10m/min, crane travel speed: 40m/min, protection class: IP55, brake: disc brake, with crane limit switch, with documentation. An on-site inspection is possible. Cedpfx Aozadlcocmorf

Condition: good (used), functionality: fully functional, Year of construction: 2023, total height: 3,500 mm, total length: 15,000 mm, total width: 6,500 mm, load capacity: 100 kg, Used ABUS and Yale Single-Girder Overhead Crane System EHB – HB110S Profile – incl. GM2 100 Electric Trolley For sale: a used ABUS single-girder overhead crane system (EHB) equipped with HB110S crane profiles. This system is suitable for light to medium-duty internal lifting and material handling applications in workshops, production facilities, and warehouses. Technical specifications: Manufacturer: ABUS Kransysteme/Yale Year of manufacture: 2023 and 2021 Type: EHB single-girder overhead crane Profile type: HB110S (500kg capacity) Fitted with power supply conductors Available track lengths: - 12,250 mm - 14,000 mm - 12,250 mm - 14,750 mm - 15,750 mm Crossbeams / Swing Beams: Length: 6,500 mm Quantity: 5 pcs (each length has 1 swing beam and chain hoist) Hoisting Equipment: - ABUS electric trolley - Type: GM2 100 The system is suitable for extension or integration into an existing EHB suspension crane installation. Ideal for efficient internal transport of materials and components within a production area. Scope of delivery: - As shown / dismantled from operation - Including crane documentation, drawings, and photos For more information, additional photos, or a quotation, please feel free to contact us. Crodpfx Acoyyq Iljmef Price per unit: from €3,250.00 3 x Abus, 2 x Yale. Also available as a lot: 5 units.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Credpfx Asx Azrdscmof Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred