Used Adhesive Dispenser for sale (1,097)

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: AN98A21604, temperature: 232 °C, I am offering for sale a Nordson hot melt adhesive system in good condition. Pgsderq D Avspfx Aflep The device has been checked for function and is fully functional. The technical data can be seen in the pictures.

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Pgedpfxjylzhrs Aflsp

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. Podpfjyt Nm Sjx Afljgp COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: used, Discharge height: 175 cm Feeding table size: 115 x 75 cm Total height: 252 cm Total length: 120 cm Pedeywdzaspfx Afljgp Total width: 110 cm Please check my other listings as well.

Condition: used, Discharge height: 125 cm Overall height: 200 cm Overall length: 205 cm Width: 117 cm Feeding table size: 190 x 80 cm Dosing adjustment Year of manufacture: 2012 Pjdpfoywdyvox Afljgp Machine ready for operation Please check my other listings

Condition: used, Etikettierleistung: ca. 3.000 Fl./Std. Formate: 0,75 l verschiedener Größe ausgestattet mit 2 (zwei) Selbstklebe-Etikettieraggregaten zur Applikation - einesVorderetikettes - eines Rückenetikettes auf zylindrische oder geformte Glasflasche 2 (zwei) Nassleim-Etikettieraggregaten zur Applikation - eines Vorderetikettes - eines Rückenetikettes - einer Halsschleife auf zylindrische Glasflasche Etikettenlänge 10-195 mm Etikettenhöhe 10-180 mm Behälterdurcinnesser: 40- 130 mm Behälterhöhe: 140-380 mm Maximale Produktionsleistung: 3.500 Flaschen / Stunde Installierte Leistung: 4 kW - komplett mit Rahmen und Türen aus Edelstahl AISI304 - automatische Geschwindigkeitsregulierung - Kopfliöhenverstellung über Touch Screen Display - Optische Orientierung anhand einer Markierung auf der Kapsel durch Sensoren auf jedem Teller und Tellerrotation mittels Schrittmotoren - Vier (4) Schnellwechselteller - Zwei (2) Etikettiereinlieiten für Selbstklebeetiketten Mod. MAK-AN mit 50 m/min auf beweglichen Stationen am Rahmen der Etikettiermaschine montiert - Zwei (2) Etikettieraggregate auf 4 Achsen, einstellbar mittels Handrad und digitaler Positionsanzeige - Elektrischer Schaltsclnank, wasserundurchlässig, aus Edelstahl AISI 304 - Maschinensteuerung mittels SPS und Touch-Screen-Display Technical Details : working direction : rotative, clockwise, left-right capacity bph max. : 5200 labels : self adhesive labels, cold glue paper labels number of labelling stations : 4 Podpfx Afjxyt D Tjlsgp number of bottle plates : 4 orientation : optical orientation using a photocell, bottle plate with stepper motor motor height adjustment : yes speed adjusment : frequence converter

Condition: used, -Etikettenrolle: 250mm -Höhe Spendekante von Boden: 50-100cm verstellbar. -Fahrbar auf rollen Pgjdpfx Asx H Tmqeflsp

Condition: used, TECHNICAL DATA Labelling machine for self-adhesive labels with 2 stations Front, back or wrap-around (roll-on) label Pjdpfx Aexytyzsflogp Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions: 2800(L) x 1300(B) x 2400(H) mm Etimax Website:   YouTube Video:   EQUIPMENT: TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products

Condition: used, with 6 heads; the monoblock consists of: - capsule dispenser: - capsule pre-and cripmer Capsule type: champagne cap folding, champagne cap applicator capacity / hour ca.: 5000 Pgodpfxsxyttzj Aflep working direction: rotating turret, right-left (CCW) Working type: fullautomatic

Condition: used, TECHNISCHE ANGABEN Anzahl Stationen: 2 Stationen für Selbstklebeetiketten Etikett: Deckel + Boden   Etikett-Breite: 30-300 mm (zu spezifizieren) Behälterformat: runde und eckige Flaschen Seitliche Gurtbänder zum fixiren der Produkte beim Etikettieren Leistung: bis ca. 4000 Fl./Std. CE Konformität: Erfüllt die CE Richtlinie Gewicht: ca. 600 KG Abmessungen: 2800(L) x 1300(B) x 2400(H) mm   YouTube Video:   Pjdsxyt Niepfx Afljgp Technical Details : working direction : left-right, linear capacity bph max. : 4000 labels : self adhesive labels number of labelling stations : 2 bottle diamater max (mm) : 120 bottle diamater min (mm) : 40 bottle height max (mm) : 330 bottle height min (mm) : 60 speed adjusment : frequence converter

Condition: used, - mit 6 Teller - mit 2 Etikettierstationen (Vorder- und Rückenetikett) für Selbstklebeetiketten Pgedpfxsxyt Avo Aflep Technical Details : working direction : left-right, rotative, clockwise capacity bph max. : 6000 labels : self adhesive labels number of labelling stations : 2 number of bottle plates : 6 bottle diamater max (mm) : 100 bottle diamater min (mm) : 60 bottle height max (mm) : 370 bottle height min (mm) : 180 motor height adjustment : yes speed adjusment : frequence converter

Condition: ready for operation (used), Year of construction: 2008, Stations: 6, labeling capacity: 3000-4000/h, labeling: wrap-around self-adhesive labels, container formats: 200ml-750ml, bottle formats: 330l Vichy/Longneck/30cl BNR, running direction: left-right, rotation direction: clockwise. Documentation available. On-site inspection is possible. Pgsdpfx Aoulkutjflep

Condition: ready for operation (used), Year of construction: 2018, Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Pgodswg E Akopfx Aflop

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 Pgjdscht Nyopfx Aflop spare parts dimter in stock equipment in stock accessories in stock

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Overall dimensions: 1600 x 600 x 1900 mm Included equipment: Pgjdpfjycl Iwsx Aflsp 4 pneumatic dosing heads Height-adjustable base The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vemag SK4675 Dispenser Manufacturer: VEMAG Maschinenbau GmbH Model: SK4675 Serial number: SK467500000 Year of manufacture: 2009 Power supply: 3-phase, 50/60 Hz, 400–460 V, 1.5 A Power: 0.5 kW Working air pressure: 6 bar Air consumption: 10 l/min SCCR (Short Circuit Current Rating): 5 kA rms Electrical schematic: SK4675890002 Pgsdew N Hl Repfx Afljp Dimensions: 1000x900x2100mm The Vemag SK4675 dispenser is a professional industrial device designed for precise dosing of food or technical products. It features a robust stainless steel construction, high work efficiency, and reliability. Powered by three-phase supply, it operates over a wide range of voltages and frequencies, making it suitable for use in various industrial environments.

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Podpfjxcvzajx Aflsgp Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Pjdpfxjxcgihe Aflsgp Product-contacting surfaces Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Condition: good (used), Year of construction: 2010, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: NC10E00094, input voltage: 230 V, Equipment: documentation/manual, Hot melt device from Nordson, hardly used, is sold including hose and application head Pgodpfjvu Axtex Aflop

Condition: new, Year of construction: 2025, functionality: fully functional, New Pallet Magazine / Pallet Dispenser Specification: Configurable Pallet Dispenser for EUR or different pallets MAX capacity of up to 15 pallets Pallet type: width from 750 up to 1200mm It could be mounted on the pallet conveyor. Main Power: 240V 50Hz Air Compressor 100L-200L Air Pressure: 6-8bar Control: Delta PLC/HMI Currently, in stock, we have 10 pieces. Pjdpfx Asi Hnz Teflegp PROTON EE-ELEKTRONIKA d.o.o

Condition: like new (used), Good working condition. Please check out our other listings as well. Pgsdpfeimwxwjx Aflop

Year of construction: 2001, condition: like new (used), Etipack Model: SIST.1 FLEXO (EMC DX head) Direction: Left-Right Type: Labeller for self-adhesive labels Serial number: A1A357R1-1 Year of manufacture: 2001 Dimensions: L x W x H = 2,600 x 1,400 x 1,250 mm Pgsdpfsfzknvox Afljp Conveyor length: 2,600 mm Conveyor width: 110 mm (Belt) Press-on belt height: 90 mm Weight: 400 kg Electrical: 230 Volt – 50 Hz – 200 Watt Features: Machine suitable for round and conical wrap-around applications Machine has been technically inspected Conveyor intermittently driven

Condition: new, functionality: fully functional, BULK LOT – tesa NOOBLESSE Bathroom Accessories Set – Retail Value €1,350,000 For sale is a bulk lot consisting of approximately 22,500 bathroom accessory items from the tesa NOOBLESSE range. This offer is ideal for wholesalers, resellers, retailers and larger projects. The lot includes eight different products with a total retail value of approximately €1.35 million. * Easy installation without drilling thanks to the patented tesa Power Kit mounting system * No damage to walls or tiles – also ideal for rented properties * Strong hold and high load capacity – suitable for tiles, glass, metal, marble, wood and many plastics * Removable without leaving residue – the accessories can be detached when required Pgodpfxjznk H Ie Aflsp * High-quality materials – brushed stainless steel combined with satin-finished glass, rust-resistant and durable * Timeless and elegant design – modern appearance suitable for a wide range of bathroom interiors * Wide product selection – accessories for towels, soap, toilet paper and more * Sustainable solution – reusable mounting system with separately available adhesive kits ## Products Included in the Lot * tesa NOOBLESSE double towel holder 40481 – approximately 6,200 units * tesa NOOBLESSE soap dispenser 40487 – approximately 700 units * tesa NOOBLESSE toilet brush 40480 – approximately 2,300 units * tesa NOOBLESSE towel rail 40484 – approximately 2,000 units * tesa NOOBLESSE toothbrush tumbler 40488 – approximately 3,600 units * tesa NOOBLESSE towel rail 40485 – approximately 3,400 units * tesa NOOBLESSE toilet paper holder 40479 – approximately 2,000 units * tesa NOOBLESSE towel holder 40303 – approximately 2,000 units The complete stock, including the respective quantities, is listed in the images. The purchase of individual partial quantities is also possible. Additional pictures and videos are available upon request. Now is the right time to expand your product range. Secure this exclusive wholesale offer of tesa NOOBLESSE bathroom accessories while stocks last. Contact us today for further information. Benefit from a strong brand, increase your sales and offer your customers high-quality solutions for modern bathroom design with tesa NOOBLESSE.

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Pgsdpfsznvqfjx Aflep Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Pedpfezkk Drjx Aflsgp Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Inspection and demonstration possible at any time by appointment.