Used Agfa C95 Washout Station for sale (4,959)

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm Nodpfxetlzg Es Abzocw -Transport dimensions: 1700/1500/H700 mm -Weight: 397 kg

Condition: good (used), Assembly station, assembly device, vacuum assembly device -Manufacturer: reis, mounting station with suction cup holder -Control: Siemens simatic -Suction cups: 6x Ø 165 mm -Platform: stroke 300 mm -Previous use: Production of solar panels -Individual components: see photos -Number: 2x mounting device available -Price per piece Ncsdpfxjtrzplj Abzew -Dimensions: 2620/1860/H1210 mm -Weight: 2000 kg/pc.

Condition: used, Soldering station, soldering iron, chip solder, soldering system, desoldering station -Manufacturer: Weller, desoldering station type WDD 81V -Voltage: 230/24 V -Operating pressure: 4-6 bar -Dimensions: 190/120/H110mm -Weight: 2.3 kg Ncedpotu Rk Eefx Abzjw

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -Design: stable -Drive: electric -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 2150 mm, adjustable -driven: via timing belt -Dimensions: 1600/1750/H2150 mm Ncodpfx Aeb H Ak Iobzew -Weight: 500 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm Ncodeb A Hdkepfx Abzew -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt Nodpfxjrv Av Ij Abzjcw -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP -Drive motor: 0.18 kW 88 rpm Nedpfxstlzgts Abzscw -Intermediate dimension: 1480 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1780/1420/H2180 mm -Weight: 508 kg

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, blind conveyor belt, slat conveyor belt, transfer station -Transfer station: Conveyor belt with tipping function, comes from blind production -Speed: 10 m/min -Conveyor belt width: 6050 mm Nsdpfoptf H Dsx Abzjcw -Conveyor belt length: approx. 880 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Transport dimensions: 6050/910/H960 mm -Weight: 520 kg

Year of construction: 2017, condition: used, Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine Ncsdpfxjflk Hpe Abzjw -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Drive: electric -2x drive motor roller conveyor: 0.75 kW -without drive motor conveyor chain -without conveyor chain -without raising -Roll width: 840 mm -Conveying length: 2300 mm -Transfer of conveyor chain: 4700 mm -Diameter roller: 50 mm -Delivery height: 400 mm adjustable -Dimensions: 2400/5400/H400 mm Njdpfx Absb Nu Izezjcw -Weight: 1200 kg

Condition: used, Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available Ncodpfx Aoc Rzk Rsbzew -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

Condition: used, Aerospace telephone system, radio network -Manufacturer: Cisco, Aironet BR1310 -Type: AIR-BR1310G-E-K9-R -Dimensions: 205/205/H80 mm Njdpfxsfm T E Ne Abzjcw -Weight 1.1 kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor Ncjdpfx Abocfkghjzjw -Execution: stable -without drive motor roller conveyor -Roll width: 590 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -pneumatic lifting: 30 mm -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 2070/925/H205 mm -Weight: 266 kg

Year of construction: 2009, condition: ready for operation (used), total width: 780 mm, total height: 1,600 mm, laser power: 20 W, product length (max.): 960 mm, number of axes: 3, This 3-axis Trotec Laser-Work-Station was manufactured in 2009. It features a powerful 20 W Nd:YAG / Pulsed Yb Fiber Laser with a marking field of 110 × 110 mm and a Z-axis travel of approximately 400 mm. The machine is designed for various applications including laser marking, engraving, and part identification. If you are looking to get high-quality laser marking capabilities, consider the Trotec Laser-Work-Station machine we have for sale. Contact us for further details. • Machine Type: Fiber Laser Marking Machine • Model: Laser-Work-Station • Laser System: SpeedMarker FL20 • Laser Type: Nd:YAG / Pulsed Yb Fiber Laser • Wavelength: 1064 nm • Laser Power: 20 W • Laser Safety Class: Class 2 (Enclosed Workstation) • Marking Head: Galvanometer Scan Head • Lens: F-Theta 160 mm • Marking Field: 110 × 110 mm • Working Distance: Approx. 200 mm • Focus Diameter: Approx. 40 µm • Pulse Frequency: 20–80 kHz • Pulse Width: Approx. 100 ns (@ 20 kHz) • Maximum Pulse Energy: 1 mJ (@ 20 kHz) • Beam Quality: M² ≤ 1.5 • Z-Axis: Electric • Z-Axis Travel: Approx. 400 mm • Maximum Workpiece Height: Up to 250 mm • Work Area: Approx. 400 × 400 mm • Worktable: T-Slot Plate • Automatic Safety Door • Dual Laser Pointer Focus Finder • Interior Workspace Lighting • Swiveling Monitor Arm • Operating Voltage: 230 V AC, 50/60 Hz • Total Power Consumption: < 500 W • Laser Unit Power Consumption: < 300 W • Cooling: Air-Cooled • Fiber Delivery Cable Length: 2 m • Operating System: Windows XP Professional • Control PC: Industrial PC • Processor: Intel Pentium 4, 3.0 GHz • Software: SpeedMark • 24 V Digital I/O Interface • Supports Barcode Marking • Supports 2D Data Matrix Codes Ncedpfx Aozibpiobzow • Supports Text Marking • Supports Date & Time Marking • Supports Vector Graphics Import • Supports Bitmap Graphics Import • Suitable Materials: Steel, Stainless Steel, Aluminum, Brass, Gold, Coated Metals, Plastics, Ceramics • Applications: Laser Marking, Laser Engraving, Part Identification, Serialization, Barcode & Data Matrix Marking, Logo Marking, Industrial Traceability

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) Nodpfxezcaufo Abzocw - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Njdpozi Upcefx Abzecw Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C-13-309-02, input voltage: 400 V, overall weight: 900 kg, Take the opportunity to purchase a high-quality used Carat grinding & polishing station: This set consists of a control cabinet and two precision polishing machines, equipped with robot connection for maximum efficiency. Ideal for professional applications in the industry. Matching robots can be offered separately. Year of construction: 05.2013 Total height: 240 cm Air pressure: max. 6 bar Ncsdpfeuzyctjx Abzow Rated current: 11.5 A Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: Nedpfxezhnafe Abzocw - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Njdpfxovpv Nuj Abzjcw

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Type: FPS 30 B Nedpfx Asyylqzobzscw Year of manufacture: 2008 Condition: good Available immediately

Condition: used, Year of construction: 1991, offer consists of: Horizon AC-8000 S air- suction collator with 8 bins - Format: max: 318x470mm, min: 148x210mm - missfeeding-, doublefeeding and jamming control - integrated jugger - bin pile height: 10cm - paper weight: 23-210g/qm - pile height: 10cm/bin Ncodezhlrlspfx Abzew - capacity: up to 2400 cycles/hour - dimension: 165x65x207cm - weight: 510kg - power: 3-phase 400 Volt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Stainless steel bag emptying, bag dumping cabinet with extraction filter Equipped with explosion relief panel (fabric is torn) Equipped with shaking motor for cleaning filters Equipped with grate Nsdpfswygbujx Abzjcw Completely stainless steel See also my other advertisements

Year of construction: 1999, condition: excellent (used), Control: CNC-controlled and can also be operated manually PC P 2000 MMX-PCI Desktop ATX Color screen 15“, keyboard CNC-Turbo Roughness for WINDOWS TECHNICAL DATA Hard rock test plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed unit Waveline 60 Basic Probe stroke: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel: 400 mm Positional repeatability: < 10 µm Device dimensions W x D x H: 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller shutters Ncodolxyp Hepfx Abzew  Hard rock plate 1200 x 500 mm  ISEL feed axis with ball screw  Workpiece clamping plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Device table  EMERGENCY stop button on the device table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard rock plate  Documentation

Year of construction: 2008, condition: good (used), Our Rommel Scanstation is available for sale. Model: WL 1000 ID-X Year: 2008 Condition: good Immediately available Ncodpfx Ajyyk T Ujbzew

Condition: ready for operation (used), Year of construction: 2002, Offered is an automatic Saurer shuttle filling station for automatic emptying, filling, threading and adjustment of embroidery shuttles. Operating pressure: approx. 6bar, Capacity: approx. 144cycles/h, Magazine capacity: 100, Air consumption: 150Nl/min, Precision of the electronic bobbin thread tension measurement: 0.1mN, Control system: PLC. Machine dimensions X/Y/Z: approx. 3170mm/1100mm/1900mm. Inspection by appointment possible. Ncodpfx Aszg Irlebzow