Used Agie Vertical Eroding Machine for sale (74,158)

Condition: excellent (used), Dahlih MCV 1020 Vertical Machining Centre Specification Table Working surface 1250 x 660mm T slot (size x number) 18 x 5mm Max Table load 1000kgs Travel X Travel 1020mm Y Travel 550mm Z Travel 560mm Distance of spindle end to table top 150- 710mm Distance of spindle centre to column surgface 600mm Lasdpfxsz R A Uno Ahaoh Spindle Spindle Nose NT40 Spindle speed 8000/10000 RPM - TBC Feed Cutting Feed 1-10000 mm/min Rapid travel 20000 mm/min Min. Input Increment 0.001 ATC Toolholder BT40 Dimensions - 4500 x 3640mm Weight 6000kgs

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1050 x 530 x 510mm, Table 1300 x 550mm, Spindle speed 0 - 12000 rpm, Spindle taper Din 40, Laodpfoz Sqwmsx Ahajh Spindle Motor 18.5kW, 30 station ATC, Mazak Matrix Nexus 2 control, swarf conveyor, coolant, Low Volt light

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Synchronous tapping, Lasdpfsy T Iwqex Ahash Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Tool and material database, X-axis bearing likely defective.

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Lasdjx Hqv Nopfx Ahaeh Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, We offer in good conditon Hurco VMX42i with BT40 spindle and Winmax software. X-Axis travel: 1067mm Y-Axis travel: 610mm Lodpfxj Aa Dd Is Ahaoah Z-Axis travel: 610mm

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Heidenhain TNC370 control Lasdpfoz Iugcjx Ahash X-Y-Z 1020-520-500 mm 6.000rpm SK40 22 Toolchanger Built 6-1996 Machine is under power

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp Lodpfx Aozu Ni Uehaoah 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: like new (used), Year of construction: 2023, Haas TM2-P Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 Laedozua Hwjpfx Ahajh WIPS HSM 4th axis connection Very few operating hours Like new!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Heidenhain, workpiece length (max.): 3,260 mm, workpiece width (max.): 1,700 mm, table load: 10,000 kg, overall weight: 23,000 kg, spindle speed (max.): 10,000 rpm, spindle nose: BT50, AWEA DOUBLE-COLUMN MACHINING CENTER TECHNICAL SPECIFICATIONS Brand: Awea Model: SP-3016 CNC: Heidenhain Spindle: BT50 (10,000 Rpm) X: 3060 mm Y: 1600 mm Z: 760 mm Distance between spindle and table: 200 - 960 mm Distance between columns: 1700 mm Table: 3260 mm x 1500 mm Maximum load capacity on table: 10 tons Internal coolant system Chip extractor PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, Ljdpfx Aoz R Ducohaoah HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, Lajdpoz Sqqmjfx Ahash table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1018, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Fanuc oi-MB, spindle speed (max.): 8,000 rpm, operating hours of spindle: 12,550 h, number of spindles: 1, For sale: used AFM R-550 Harnaś milling machine. Vertical machining center. Year of manufacture: 2004. Serial number: 1018. X/Y/Z travel: 550 x 410 x 510 mm. Table size: 1120 x 360 mm. Spindle speed: up to 8,000 rpm. BT40 taper. Fanuc control system. Spindle overhauled in October 2024. First owner. Please contact me for further details. Lasde Aa N H Iepfx Ahash

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Laodpfx Ao Aaygxehaoh Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS Lajdj Ab Uzaepfx Ahash • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: defective spare-parts repository (used), CNDN CK6140 machining center, non-functional, has been disassembled, a new part has been machined but we have not reassembled it. Sold as non-working – can be reassembled or used for spare parts. Laodpfx Asx S I Dbjhajh If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Lsdpfxjz Nxzbs Ahaeah Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture * Lasdpfxsu Sq Eme Ahash

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Ljdpfxoz Uwf As Ahaoah Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet Ledpsu Idn Hefx Ahaeah - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 CNC Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-Axis: 300 mm Lasdpfx Aexflq Ashajh Travel Y-Axis: 300 + 100 mm Travel Z-Axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): • Fanuc Robodrill α-D21SiA5 Machining Center • 4th Axis Rotary Table • Coolant Pump and Chip Tray • Exact scope as per photo series No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Lsdjzc Icwopfx Ahaoah Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: good (used), Year of construction: 2010, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2010 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes, among others (list not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - 4th axis rotary table - Coolant pump and chip tray Lodoxflvfopfx Ahasah Exact scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currency of the information provided.

Condition: used, Year of construction: 2018, travel -x axis 1.300 mm travel -y axis 670 mm travel -z axis 625 mm Lasdpfj Adfluox Ahaoh control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 U/min tool taper SK 40 table dimension (L x W) 1.500 x 670 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 6700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications Lasdpsz Tc E Sjfx Ahaoh • Type: 3-axis vertical machining center / traveling-column milling machine • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 • CNC Control Unit: Heidenhain iTNC 530 • Machine Weight: Approximately 12 tons

Condition: used, Empty weight: 6.000 kg Serial number: 102356 Year of manufacture: 1992 X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Control system brand: Mazatrol Clamping table dimensions: 2000 × 410 mm Maximum load: 800 kg Spindle: Taper: ISO 40 / CAT 40 Speed: 40 – 7,000 rpm Power: 11 kW (15 PK peak) Tool changer: 1 Capacity: 24 tools Weight: 6,000 kg Electrical: 230/460 V Dimensions: approximately 4,000 × 2,900 × 3,000 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Lsdpfxez R S S Rj Ahajah Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2015, Affeldt AVN E 350 D vertical flowpacker Automatic filling and closing machine for pillow bag. Closes the film with heat seal for (flat) pillow bags PP filmFilmholder up to 75 cmFall pipe circumference 44 cm.12,5 øMachine is suitable for printed filmDynacode printer Year: 2015Excluding discharge conveyor Laedpfoz Rbl Eox Ahaeh The tubular bag machine AVN E350 D is easy to integrate in existing facilities based on its slightly utility space and low height and additionally its optional range of packaging charges leads to a versatile usage of the machine. The AVN E350 D packs previously weighed or counted citrus fruits, onions, tomatoes, potatoes and similar products with effective output into bags. The menu-driven operating dialogue via touch panel, the free programmable control as well as the memory for different programs ensure an easy operation. The machines have been disassembled, we've made video's of the machines while in operation. The condition is used, but in good working condition. The machines will not be delivered refurbished. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery