Used Almi Al 100 U for sale (60,318)

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Nwedpsv Skzksfx Acfsh Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase Nodpfx Ajyrh I Eecfjwh • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: like new (used), Bosch. U-MB 1000Kg/h Loos 10Bar. Nwedpfju I Ru Hjx Acfsh

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Nwodsh Rit Eopfx Acfeh Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: used, Gebr. Thiel Duplex 159 Universal Milling Machine with DRO High quality German-built Gebr. Thiel Duplex 159 universal milling machine in good used industrial condition. Precision toolroom machine fitted with Newall digital readout (DRO), swivel vice and universal milling head. Well regarded for accuracy, rigidity and versatility, these machines are ideal for toolrooms, precision engineering, prototyping, maintenance workshops and general machining applications. Machine Details: Manufacturer: Gebr. Thiel GmbH Model: Duplex 159 Universal milling machine 380V 3 phase Newall DRO fitted Swivel machine vice included Universal adjustable milling head Horizontal and vertical milling capability Coolant tray and lubrication system Features: Nsdpfxjy R D E Ej Acfjwh Precision table feeds Heavy cast iron construction Fine feed controls Toolroom quality machine Ideal for precision engineering work Condition: Good used workshop condition with normal cosmetic wear for age. Machine is complete and operational. A highly sought after universal milling machine with excellent build quality. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: good (used), Year of construction: 2009, Ref: 11073 . 2009 AL-MEISTER PLS3310 Pluster Laminator 350mmx500mm single sided laminator for a wide variety of stock. Features: Very user friendly Cost saving, optimized efficiency Paper feeding, laminating and separating all in one go. Pluster ‘s unique feature is that the film setting information is stored for future reproduction. Fujipla's accumulated laminating technology provides excellent quality. Offset & digital printing on demand can be perfectly laminated with Fujipla's special SAP film. The most compact machine on the market with the lowest noise level. Can be used anywhere, from factories to office spaces or small areas. Specification: Processing Speed: 1.0-5.0m/min. (*1) Warm-up Time: Approx. 15-30min. (*2) Temperature Range: Ambience, 60-130°C Feeder Max. Load: 100mm Paper Thickness: 115-300g/m2 Njdpfeymz N Sjx Acfowh Max. Paper Size: 350mm(W) × 500mm(L) Min. Paper Size: 318mm(W) X 450mm(L) Power Consumption: 1.0kw / 6A Power Source: AC220-240V Net Weight: 151.6kg

Condition: used, Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², overall weight: 860 kg, We are offering this used AL-KO Alko Power Unit 300 mobile dust extraction unit, manufactured in 2018, for sale. Manufacturer: AL-KO Model: Alko Power Unit 300 Year of manufacture: 2018 Condition: used Type: Mobile dust extraction unit Nwjdpfx Acjzg Anhjfoh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) Nwjdsyk I U Aspfx Acfsh - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: used, mileage: 288,554 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,490 mm, first registration: 09/2022, fuel tank capacity: 75 l, CO₂ emissions: 234 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 1, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, parking sensors, power assisted steering, sliding door, General information Number of doors: 5 Model range: Aug 2017 - Jul 2022 Cab: single Technical information Torque: 300 Nm Number of cylinders: 4 Engine capacity: 1.968 cc Transmission: 6 gears, Manual gearbox Measures length/height: L3H2 Dimensions (LxBxH): 684 x 204 x 259 cm Weights Empty weight: 2.127 kg Carrying capacity: 1.373 kg GVW: 3.500 kg Interior Interior: grey Consumption Average fuel consumption: 7,9 l/100km (36 MPG) Urban fuel consumption: 8,8 l/100km (32 MPG) Extra urban fuel consumption: 7,5 l/100km (38 MPG) Maintenance, history and condition APK (MOT): tested until 09/2026 Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Android Auto - Apple CarPlay - Blind spot monitoring - Bluetooth - Collision mitigation by braking - Comfort seats - Connected services - Driver's airbag - Electrically adjustable door mirrors - Electrically folding door mirrors - Electrically operated front windows - Front and rear parking sensors - Front central armrest - Front head airbags - Front parking sensors - Front side airbags - Heated door mirrors - Heat reflecting glass - Height adjustable driver's seat - Height adjustable steering wheel - Hill-hold control - Immobiliser - Lumbar support - Multifunctional steering wheel - Multimedia enabled - Partition Nwjdpfx Ajzd Htijcfeh - Radio - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door right - Start / stop system - System to avoid follow-up collisions - Telephone enabled with Bluetooth

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Nedpfjfzbqyox Acfswh Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Njdpfxewv T R Uj Acfewh Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Nwsdpoyc H I Sefx Acfeh Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Key Features & Benefits Nwedpezgr Htsfx Acfoh Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Dimensions & Weight Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact

Condition: ready for operation (used), Siemens 1FT6105-8AC71-3AL9-Z motor, serial number YFN315124101001 - Z = N05 (alternative shaft geometry) with optical encoder B01 2048 S/R and EBD 4B 24V - 31.0W brake. Professionally and completely overhauled and tested, 100% functional. Scope of delivery as shown in the photos. Nwsdszc Twtjpfx Acfsh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, clear span: 2,700 mm, load capacity: 4,100 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet racking system: Pallet racking system 4 m high, 2 beam levels per bay (clear width 2700) Scope: 32 frames, 4 m high 128 floor anchors 18 end-of-aisle protectors 100 beams, 2.7 m long, 0.11 m high 150 grid decks, 89/110, load capacity 1000 kg 7 load capacity signs Delivery to construction site Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after receipt of payment - delivery to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement. Nwjdpfezfgkwsx Acfsh

Condition: used, mileage: 100 km, power: 234 kW (318.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, soot filter, * Chassis for a body length of approximately 7,000 mm * Wheelbase 5,100 mm * Allison 6-speed automatic transmission * Distance control cruise control * Lane keeping assist * Automatic climate control * Seat heating * Differential lock * Euro 6 emission standard * Spoiler * Sun visor * Short cab * Glass sunroof * Luxury driver's seat Njdpfxozc S Ide Acfswh * Leaf/air suspension

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. Nwodpeqx Uh Nofx Acfeh More than 10 pallets available.

Condition: like new (used), Generally overhauled Price: 5.500EUR Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Nwjdpfex N Ed Tex Acfjh Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: new, Generally overhauled machine Price: 7.000EUR Spiral dough mixer 120 kg dough Diosna Power in flour: 75 kg Bowl contents: 180 liter Njdpfx Acjx N Edyefowh Digital control keyboard with program memory Cover with safety switch Castors with brakes Voltage: 400V / 50Hz / 3 N/PE Electric power: 6.5kW

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,674 mm, table width: 600 mm, table length: 1,350 mm, table load: 1,000 kg, overall weight: 6,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,740 mm, number of axes: 3, This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details. • CNC control: MSC-504 • Distance spindle nose to table: 150–660 mm • Tool magazine: 30 tools, side-mount ATC Njdpfjzc Nfaex Acfswh Technical Specification Taper Size BT 40

Condition: ready for operation (used), Siemens 6FC5210-0DA00-1AA1 MMC 100.2 SN: ST-MD2007975, professionally fully overhauled and tested with 24 months warranty, 100% functional, scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please inquire for price separately! Nodpjx Eurljfx Acfewh

Condition: ready for operation (used), Siemens 6FC5210-0DA20-1AA0 Sinumerik FM-NC/810D/DE/840D/DE MMC 103 SN:SC-JD2042945, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Nwedpfx Aox Eurrjcfeh

Condition: ready for operation (used), Rexroth HDS03.2-W100N-HS12-01-FW controller, MNR: R911190010, SN:291389-04261, controller has been factory overhauled by the manufacturer, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nodpfxex Dw S No Acfowh

Condition: ready for operation (used), Siemens 1FK7080-5AH71-1EH0 synchronous servomotor SN: YFX516379401003 – Encoder AM2048S/R F48 / Brake 24VDC 19.0W 3016402, professionally overhauled and fully tested with 12 months warranty, 100% functional, delivery as shown in photos Nsdox Dukcepfx Acfewh

Condition: ready for operation (used), Siemens 1HU3104-0AH01-Z Permanent Magnet Motor, Z= see nameplate SN E6B61004703007. Professionally fully overhauled and tested with 24 months warranty, 100% functional. Scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please enquire for price separately! ATTENTION: Please enquire separately for packing and shipping costs! Nedpfox Dvnijx Acfewh