Used Amazone Walzen Aw 12200 for sale (851)

Condition: used, Technical details: width: 190 mm depth: 200 mm Nedpfx Aou N Ecboa Islc height: 335 mm weight of the machine ca.: 29 kg

Condition: used, Technical details: width: 410 mm depth: 450 mm height: 985 mm weight of the machine ca.: 320 kg 1 piece T-slot to DIN 650: T-slot width a=28; h= 42; b= 47; c= 19.5 mm, T-slot spacing 160 mm Nljdpsu S Hubefx Aa Iec Foot clamping with slotted hole Ø 22 x 300 mm *

Condition: used, Technical details: width: 1250 mm depth: 970 mm height: 1600 mm Nsdpfeu S H Arjx Aa Islc weight: 2,0 t 1 piece to DIN 650: T-slot width a= 36; h= 62; b= 62; c= 27 mm, T-slot spacing 200 mm *

Condition: used, maximum load weight: 12,880 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2016, next inspection (TÜV): 06/2026, loading space length: 7,231 mm, loading space width: 2,480 mm, loading space height: 2,431 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Steel rims, air brake, disc brake, side door, wing doors, toolbox, SAF axles, used vehicle, electronic braking system Vehicle no. 3365, ABS, EBS, length-adjustable towing drawbar, SAF axles with disc brakes, air suspension with lift and lowering system, tires: 385/65 R22.5, storage box, box body, rear portal doors, 2 x side doors on the right, anti-slip floor, lashing rails left and right, cargo area dimensions LxWxH: 7,231 x 2,480 x 2,431 mm, unladen weight: 5,120 kg, gross weight: 18,000 kg, 1st owner. For inquiries please, errors and interim sale reserved. Nledjy Sdb Aepfx Aa Ioc

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for Nljdpfofguntsx Aa Iec eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Type : automatic mincer / grinder Power : 9 kW Tank capacity : 110 liters Diameter of perforated disc: 114 mm Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Width : 820 mm Depth: 1260 mm Nedjyvv Ddepfx Aa Ijlc Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 66 kW (89.73 HP), Equipment: CE marking, Horizontal thin-cut band saw with 3 stations Nlodey H Uniepfx Aa Isc Make: Allwin Model: AW-400-3 Year of manufacture: 2013 Horizontal thin-cut block band saw with 3 stations, previously used in parquet production. Suitable for individual lamella cuts. Max. cutting height approx. 300 mm Max. cutting width approx. 400 mm Approx. 22 kW / 30 HP per station

Condition: new, Year of construction: 2026, Bore 25 mm number 6 Dimensions (LxWxH) 155 x 140 x 130 mm Nlsdpfxjy Ehv Re Aa Ijc weight - pallet system 14 kg Two new Toolholder for BMT 65 turret Price for each toolholder 6x Ø 25 mm bore extern and internal coolant Haas ST- line / BMT 65 for Dooasan, Haas, Hwacheon

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Very neat twin-column automatic bandsaw with NC control on the length measuring system. Capacity Ø 360 mm; max. height 360 mm; max. width 380 mm. Saw blade dimension: 4430 x 34 x 1 mm. Infinitely variable band speed from 25 to 112 m/min. Main motor 3.75 kW, total power 4.7 kW. Single feed stroke 500 mm, multiple up to max. 4500 mm. Machine equipped with chip conveyor, powered chip brush, and bundle clamping device. Njdpoyzcacofx Aa Iolc

Condition: excellent (used), Year of construction: 2016, operating hours: 1,200 h, High Precision Advanced Thin Film Piezo (TFP) technology Extreme Dot Placement accuracy for unmatched line detail and photographic print quality One-inch wide print head with 720 nozzles per color Auto-switching dual-black ink technologies - Photo and Matte Black Produces variable-sized droplets as small as 3.5 picoliters to greatly decrease print times while optimizing photographic print quality Maximum resolution of 2880 x 1440 dpi for incredibly sharp text and line art Printing Technology: Epson MicroPiezo® inkjet technology Maximum Print Resolution: Paper: 720 x 720 dpi Film: 1440 x 720 dpi Njdpfxjqrq Uye Aa Ielc Print Speed: Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Ink Type: SurePress AQ Ink Ink Palette: Cyan, Magenta, Yellow, Black, Green, Orange White Ink Configuration: Epson industrial-quality, water-based, resin-coated pigment ink system (SurePress AQ) Temperature: Operating: 64° to 82°F (18° to 28°C) Humidity: Operating: 35 to 55% (no condensation) Sound Level: 75dB or less (excluding the alarm sound) Dimensions: 13.75' x 6.73' x 6.99' (4,190mm x 2,050mm x 2,130mm) WxDxH Weight: 4960.40lbs (2,250kg) Ink Supply Fill Volume: 700ml Ink Shelf Life: 2 years from printed production date or 6 months after open Power Supply Voltage: Rated +/- 10% (180-220V) Rated Voltage: AC (Three phase system) 200V Rated Frequency: 50-60Hz Rated Current: 30A Input frequency range: Rated +/- 1%

Condition: excellent (used), Indexable milling cutter (28233) Type Gigacut AW 125-13-8 Nodpfx Aajhzt E Te Iolc Diameter 125 mm Arbor hole 40 mm Weight 2.5 kg

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg Nledpfxjyyv Auo Aa Ioc

Condition: new, functionality: fully functional, Year of construction: 2023, Freesby is a vertical turntable stretch wrapping machine, ideal for all companies that need a robust, reliable machine with excellent productivity. All models have been designed and built using the latest technological solutions. Freesby AW is equipped with an automatic gripper, film cutter and sealing system. Pallet size: 1200x1000mm Pallet height: 2.200mm Weight: 1.500kg Nsdpfxerrg Tvs Aa Ielc

Condition: used, Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT Nljdpfx Aaeyuy Nae Isc 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2016, condition: ready for operation (used), Vibratory plate compactor Wacker Neuson WPP 1540AW, year of manufacture 2016, 86 kg, gasoline-powered, with water tank, serial number 30119556. Nlodpfxef A Nwlj Aa Ijc

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Meat Mincer Düker-Rex AW 98 / 1400 Complete V2A stainless steel construction. In very good condition with sorting device. See photos. Year of manufacture: Würzburg 07 / 2021 Machine is plug-in ready and workshop-tested. Further details upon request. Payment by cash or advance bank transfer. Nljdpfxeynkb Hj Aa Ioc Sale only to commercial buyers. No warranty, no liability.

Condition: new, functionality: fully functional, machine/vehicle number: 0684, empty load weight: 4,000 kg, maximum load weight: 40,000 kg, overall weight: 44,000 kg, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 780 mm, tire size: 405x260, tire condition: 100 %, Year of construction: 2026, Transport trolley TPW 40 AL-PA-AW Nledpfxsfxgxno Aa Ijc Type: TPW 40 AL-PA-AW Serial number: 0800 Year of manufacture: 2026 Payload: 40,000 kg on 60% of the loading area at 6 km/h Dimensions: Length of loading area: 4000 mm Width: 2200 mm Height: approx. 760 mm Steering: All-wheel steering, pivoting axle, axle tilting Tires: 16 heavy-duty wheels 405-260 Drawbar: Length of drawbar 1800 mm with fall protection and drawbar eye according to DIN for 40 mm bolt Paint: RAL 2000 Loading platform: 50 mm Douglas fir/larch, countersunk and screwed into the frame #Heavy-duty transport #Intra-company transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 to 100 tons #Heavy-duty transport platform trolley #Platform heavy-duty trailer #All-wheel steering #Transport trolley

Condition: ready for operation (used), An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Njdpfjxnbruox Aa Ielc

Condition: used, Year of construction: 1999, length 5000 mm payload 18 . Solid rubber, forced steering, for rollers, 2 pieces in stock Njdjwg Htwspfx Aa Islc

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm Nlodpfx Aaeuddcas Isc conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, Nodpfxouigrzo Aa Iolc research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, Automatic weighing unit for granulate like products (chemicals, food, sugar, coffe, detergents, etc.) into bottles, cans or similar. Including hopper, vibrating feeder, weighing unit, housing to minimize dust, rack and conveyor. - Specifications: stainless steel version (SS304); 2 head weigher each with weighing range of 10-2000g; Accuracy: Nljdpjv Nk Nisfx Aa Iec

Condition: used, functionality: fully functional, maximum load weight: 15,100 kg, overall weight: 18,000 kg, Year of construction: 2017, KOEGEL Trailer - AW 18 B2 A1A Chassis: WK0A0001800205329 – Registration: XA606PM Year: 20.04.2017 Tyres: Size 445/45 R19.5 Nljdpfx Aajym Rm To Ijc Gross weight: 18,000 kg – Payload: 15,100 kg Container lock distance: 587 cm

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Nlodpfxex Uy Rle Aa Isc Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 20 h, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Nlsdjxwmb Hopfx Aa Isc Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.