Used Arbor Feeder for sale (3,022)

Condition: used, Discharge height: 175 cm Bsdpfsywdzajx Ahmeln Feeding table size: 115 x 75 cm Total height: 252 cm Total length: 120 cm Total width: 110 cm Please check my other listings as well.

Condition: excellent (used), Discharge height: 3100 mm Feed height: 1870 mm Belt width: 590 mm Cleat spacing: 250 mm Cleat height: 35 mm Total height: 3950 mm The machine is ready for operation Please check my other listings. Blsdpfx Asy D Dtcohmjn

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery Bledjvpaubjpfx Ahmjn

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Bljdpfx Ajrn Sqhjhmjn Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment Blodpeihf Twofx Ahmen 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: ready for operation (used), Year of construction: 2025, load capacity: 25 kg, arm reach: 1,500 mm, total width: 900 mm, total height: 918 mm, product length (max.): 800 mm, number of axes: 6, This 6-axis EASYROBOTICS ProFeeder was manufactured in 2025. It features a modular robot cell system designed for small to medium batch production, with a top plate size of 900 × 800 mm. This collaborative robot is compatible with various cobots and is ideal for applications such as CNC machine tending, pick and place, assembly automation, and parts handling. If you are looking to get high-quality automation capabilities, consider the EASYROBOTICS ProFeeder machine we have for sale. Contact us for further details. • Top plate size: 900 × 800 mm • Compatibility: Collaborative robots (Universal Robots, Doosan, Hanwha, and similar cobots) Bjdpfx Asyzqvfehmeln • Applications: CNC machine tending; pick and place; assembly automation; parts handling • Integrated features: robot mounting interface; controller holder; teach pendant holder; cable management system • Design: plug-and-play robot integration; suitable for small to medium batch production Additional equipment • Optional/compatible (not included): collaborative robots (UR, Doosan, Hanwha, similar cobots)

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm max. module 16 shifting 250 mm Bodpozr Rpksfx Ahmjln milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm total power requirement 32 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Diameter: 32 , 40 , 50 , 60 mm

Condition: excellent (used), EasyRobotics ProFeeder Compact – 6 Shelf Version The EasyRobotics ProFeeder Compact is a versatile, space-saving automation solution designed for loading and tending CNC machines in small to medium batch production. This 6-shelf variant offers increased capacity, making it ideal for extended unmanned operation and enhanced productivity. Bsdpfjw Tunuox Ahmsln ✅ 6 shelves for maximum workpiece storage – provides CNC machines with extended autonomy ✅ Compact footprint – just approx. 1165 × 400 × 600 mm, fits easily in tight workshop spaces ✅ Flexible robot integration – compatible with most collaborative robots (cobots) ✅ Secure tray locking – available with mechanical or pneumatic locking systems ✅ Integrated controller compartment – eliminates the need for a separate control pedestal ✅ Fast changeovers – shelves can be quickly swapped for new batches With up to 6 trays, each supporting between 60 and 120 kg, the ProFeeder Compact ensures stable and continuous machine operation. It is the ideal solution for manufacturers aiming to increase efficiency, minimize downtime, and advance towards smart factory automation.

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: Bedoz Ek S Aopfx Ahmoln A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Year of construction: 2022, condition: used, KOLBUS Box Line Taper BLT 200 year 2022 For the automatic production of raw boxes from cardboard blanks. The BLT 200 is used for uprighting punched and grooved cardboard. Configuration: copilot system with touch screen cardboard feeder uprighting channel 4 heat-sealing tape stations 2 sets of knives (4 pcs. each) 2 sets of counter knives (4 pcs. each) servo-controlled drive technology based on Siemens technology Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm Bledpfx Ahsz E Npgjmjn cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex J-200 500U • Control: Mazatrol Matrix Nexus 2 • Year: 2014-05 • Serial No.: 255239 • Cutting time: 8,867 hours • Network: LAN connection • Condition: The machine is in very good technical condition with extremely high precision. • Max. turning diameter: 530 mm • Max. turning length: 500 mm Bjdjzwhdvjpfx Ahmeln • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 450 mm • Y-axis: 200 mm • Z-axis: 550 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW (increased power) • C-axis: 360° with 0.001° indexing Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant (liquid/air) B-axis • Angular range: -30° to -190° • Full indexing Tooling, Magazine and Additional Equipment • Tool magazine: 72 positions • Tailstock: MT5 Auto • Chuck: Hainbuch Ø65 collet chuck • Tool measurement: Yes (measuring arm) • Parts catcher: Yes • Chip conveyor: Mayfran • High-pressure pump: 15 bar • Bar feeder: Irco ILS-MUK-7012 Machine Condition and History • The machine is fully operational and functions as it should. • No alarms or critical faults. • Smooth movement on all axes. • Spindles run smoothly without vibration. • Linear guides and ball screws are in good condition. • Hydraulic and pneumatic systems operate normally. • Regular in-house servicing. • Lubrication system OK. • The machine is clean and well maintained. Included Documentation • Photos of the machine • Video of the machine in operation • Screenshot of service history • Electrical diagrams on CD • Manuals on CD Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 500 mm length • 72 tool positions – rare and highly attractive • Through-spindle coolant (liquid/air) • Integrated robot interface (Smartshift BASE) • Irco bar feeder • Hainbuch collet chuck

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Bodpfx Aez E Sbrjhmeln This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: excellent (used), Year of construction: 2022, operating hours: 883 h, functionality: fully functional, 8 Channel JuanaRoll machine - Automatic Pre-roll machine Manufactured in 2022, in excellent condition, very few working hours - only 883 working hours in total Machine capable of producing up to 4,000 Pre-rolls per hour while having the highest accuracy in the industry Very flexible - capable of running multiple strains at the same time. You can dedicate specific lanes to specific sizes without having to change cone blocks. Cone presentation possible: Twisted & Trimmed / Twisted / Crown - Cone processing machine for opening, filling,weighing, compressing and twisting of cones - Equipped with servo-controlled conveyor with cone blocks for station-to-station processing - Vision System per channel for checking for correctly opened cones before filling Bodeyzuhxepfx Ahmsln - Weighing systems with individual weigh cells per channel for accurate dosing - Vibratory feeders and stainless steel canisters per channel for product supply - Funnel and compactor assemblies with adjustable compaction sequences via HMI - Tamping station for even compaction of the product - Twister unit for automatic closing of cones (optionally with trimmer system) - Central HMI control with recipe management, alarm notifications and maintenance functions - Electrical connection: 230 Vac, 60 Hz, 1 phase, 20 Amps - Pneumatic connection: 90 PSI (6.2 bar) dry air - Air consumption: approx. 15 CFM (7.1 L/s) - Machine weight: approx. 1,800 kg - Dimensions (L x W x H): approx. 362 x 131 x 235 cm - Machine is designed for industrial production environments - Comes with operator's manual

Condition: new, Year of construction: 2026, We offer customized conveyor belt solutions, whether chain belt conveyors, apron conveyors, sliding belt conveyors as feeders for baling presses, shredders or as extensions for slitter rewinders. Bljdpfx Ahoq A S Evsmjn Manufactured according to customer requirements, this is a sample offer.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Pegas 500 X 750 Horizontal X-NC 2000 Automatic Bandsaw- Year 2016 Blodpfx Ahoz Hfftsmjn 500mm Diameter Tube / 400mm Diameter Solid Bar. 750mm x 480mm Sections. +/- 45 and 60 Degrees. 4000mm Feeder arm.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Bedpfx Aexc Uv Ashmjln

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Bledpfx Ahsz Ht Icemen Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3.7 kW (5.03 HP), overall weight: 12 kg, Wacker Neuson BTS 635s Cut-Off Saw incl. 350mm Cutting Wheel NEW Wacker Neuson BTS 635s Joint Cutter / Cut-Off Saw – NEW | 128 mm Cutting Depth | 350 mm Wheel | 2-Stroke Gasoline Engine Article number: 5100005408 Technical Data: Manufacturer: Wacker Neuson Model: BTS 635s Condition: NEW Operating Weight: 11.6 kg Wheel Diameter: 350 mm Wheel Arbor: 25.4 mm Max. Cutting Depth: 128 mm Engine: 2-Stroke Gasoline Engine Engine Power: 3.7 kW Fuel: Gasoline Starting System: Reversible Start Accessories: 350mm DIA Cutting Wheel Highlights & Features: - Compact cut-off saw for precise cuts in asphalt and concrete Bsdpfx Ahez Hvnxomoln - Powerful 2-stroke engine – reliable and efficient - Cutting depth up to 128 mm – ideal for versatile applications - Easy handling due to low weight - Ergonomic design for comfortable working - Robust construction – ideal for everyday use on construction sites - Made by Wacker Neuson – proven quality and durability - Delivery without cutting wheel – accessories available as an option Application Areas: ✓ Road and civil engineering ✓ Fiber optic expansion ✓ Asphalt and concrete cutting ✓ Sewer construction and cable laying ✓ Renovation and repair work ✓ Construction companies, municipalities and garden/landscaping ✓ Joint cutting on small to medium-sized construction sites Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection and collection possible Delivery: nationwide in Germany and internationally upon request Price: Ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices excl. VAT Other sizes & models available! ➡️ Cut-off saws with various wheel diameters and engine versions – also electric and battery-powered Buy Wacker Neuson cut-off saw | BTS 635s NEW | Joint cutter with 2-stroke engine | Cut-off saw 350 mm | Cutting depth 128 mm | Wacker Neuson BTS series | Compact cut-off saw | Professional cutting technology Your reliable partner for cutting and sawing technology: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now and secure immediately available new goods! If required, we will gladly offer you a virtual inspection of the machine via video call.

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" knee joint 55 mm. 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. Blodpfx Ahju Imnpsmjn 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station Bledpfxsk H Sfhj Ahmen - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head Bodpfez H Smwox Ahmsln • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Bjdpfez H U I Rsx Ahmjln With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: good (used), Spindle mount, vertical + horizontal SK 40 Arbor adjustment approx. 80 mm Table clamping surface 800 x 340 mm Travel distances X-axis 500 mm Y-axis 350 mm Z-axis 500 mm Speed range 35 – 1550 rpm Table adjustment: Blodpsin Dktefx Ahmjn Feed rates 6 – 270 mm/min Rapid traverse rates X + Y Drive power approx. 3 kW Machine dimensions L x W x H 1350 x 1300 x 1880 mm Weight approx. 1750 kg Accessories / Special features: • Like-new 3-axis digital display SINO • Vertical milling head, swiveling R + L, arbor adjustment • Horizontal milling spindle • Feed in all axes • Rapid traverse X + Y • Coolant system • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Bjdpfx Ahoxpvkhomsln Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated upon prior arrangement. - The machine has undergone subsequent technical modifications. As a result, a second, higher speed is available for processing smaller pipe dimensions. Bodpfx Aez Hcp Nohmsln - A protective frame was manufactured to protect the machine, which helps to minimize external damage. The protective frame also features two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 setpoint values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of supply includes a wide selection of tools for various applications, including: Round tubes Flat bars for heavy-duty and lightweight arbors Square profiles Rectangular tubes T-profiles Angle iron Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex-works. The disassembly, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned freight forwarder. Technical specifications according to available documentation. Subject to prior sale. Seller: Firma GERO Karl Gerke e.K. 48629 Metelen, DE