Used Arburg Allrounder 420C 800-100 Vu for sale (30,330)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Nwjdpfx Abjw Hpwrjzsi The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Nwjdpfxsyab R No Abzei Robot WITTMANN W818-2558 (2013)

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Nodpfxozfhx As Abzewi Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Nwodozd Ehxepfx Abzei

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 Nwedpfx Aeywzv Ijbzoi - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: used, Year of construction: 1996, I am selling an ARBURG 420C injection molding machine from 1996. The machine is fully functional, well-maintained, and has been used for light production. It features a robust hydraulic design, making it ideal for medium-sized molds. Parameters: - Clamping force: approx. 100 tons Nedpfxjzdlwae Abzswi - Distance between tie bars: 420 x 420 mm - Screw diameter: approx. 35-40 mm - Injection volume: 140-180 cm3 Control system: Dialogica / Selogica - Weight: approx. 3.5 tons

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration Nwedpfxox D E Dys Abzoi • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Operational status: fully functional Condition: very well maintained - German origin - from first owner Extras: 2 x core pull units Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Thermoplastic processing Open nozzle 55mm Clamping plate set 570 central 125 mm Selection unit - extended graphics Nwsdpfx Ajw Tt R Iebzei - extended tool protection - extended travel movements - extended clamping - production control - job change Complete documentation - electrical diagrams, etc. Injection unit Screw diameter: 55 mm Injection weight: 434 gr./PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit Clamping force: 200 tons / 2000 kN Tie bar distance: 570 x 570 mm Clamping plates: 795 x 795 mm Tool installation height: 300 mm Max. distance between plates: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connection value: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible Available from our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell our own machines purchased from ongoing production from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Nodpfeyf Ha Hsx Abzewi Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Nsdsy Aybyepfx Abzjwi Opening Force | Stroke: Max. 130 kN | 350 mm. Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Mould Mounting Platens (w x h): Max. 446 x 446 mm. Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 cc Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Fully inspected! PRICE REDUCED FROM 7,000 TO 6,000 EUR!!! Njdpox Rq Rnefx Abzjwi

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 litres Heating capacity: 4.5 kW Blower output: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Njdpfxey N T Utj Abzowi Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Transport height: up to approx. 3000 mm Unit weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available Price: 1,350 EUR / unit

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details Nodpfsrxtpdex Abzswi CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: excellent (used), Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Nwedpfsu Dmgqex Abzoi Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Nwsdpjwugczofx Abzji Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Nodpfx Absyym Rpszewi

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit Nwsdpfx Abeyxdwdezsi • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Nwedpfjytdfijx Abzoi Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm Nwedpox Nkp Iofx Abzoi • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. Nwjdpfx Ajydnigjbzei • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Nwjdpfx Abjyya Injzei Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Distance between platens: 1000–1400 mm Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Working hours: 53.212 h Type: Horizontal Drive: Hydraulic

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Nwedpfx Aev S E Dgsbzoi Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: used, Year of construction: 1997, functionality: fully functional, overall weight: 160 kg, The Thermolift 100-2 from Arburg is available for sale, 8 units in total. Price is per unit. Nsdpfeyh Hypjx Abzowi Thermolift 100-2 Granulate drying Drying hopper capacity: 100 L Heating power: approx. 4.5 kW Air volume: approx. 90 m³/h Conveying height: up to approx. 3 m Weight: approx. 150 kg 100 liters Heater: 4.5 kW Blower: 1.7 kW

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Min. mold height: 450 mm Ejector force: 70 kN Nodpow Suy Isfx Abzowi Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Conveyor belt "16"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm Nwodpjw Su A Njfx Abzoi MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160