Used Asys Mps 100 for sale (26,059)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Kodsz Rxg Hjpfx Akijnc Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No

Condition: new, GMN TSE 100cg-12000 / 1.25 high-speed spindle, serial number: R367004, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Knedpfx Aoi D U U Nskijc

Condition: new, AEG Modicon AM-C 916-100 CPU board, serial number 0007107, unused, 100% functional. Kodei D Tu Aepfx Akienc

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02030, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Knodpfx Aei Ebifokioc

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02033, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Knodpsi Ebiiofx Akiec

Condition: used, empty load weight: 6,990 kg, maximum load weight: 38,010 kg, overall weight: 45,000 kg, first registration: 08/2007, wheelbase: 1,810 mm, color: grey, mileage: 100 km, gearing type: mechanical, Equipment: ABS, Unladen weight: 6990 kg, permissible total weight: 45000 kg, electronic braking system (EBS), BPW axles, container locking mechanisms, 2 steerable axles, hydraulically and forcibly steered! Sold on consignment, non-binding offer, errors and prior sale excepted. Image may not match the actual offer. Kjdpe Aa Hm Sefx Akienc

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Knsdpfoz R A Iujx Akioc

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Power: 3 kW S1 / 4 kW S6 ED 40% Knedpfxjzt Dy Sj Akiec Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Fully functional This saw is ideal for rough cutting. Availability: short notice Location: near Mannheim

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 16803, fuel type: electric, empty load weight: 750 kg, total length: 1,810 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,225 mm, sweeping width: 1,000 mm, Sweeper-scrubber machine Knsdpoyytixjfx Akijc Chassis number: 16803 Condition: As new Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: Hoppecke Aquamatic Battery type: PzS Battery year: 2024 Battery condition: 80 - 100% Description: 1,000 mm working width, 6,000 m²/h surface performance, 120 l container capacity, hydraulic high dump, round filter, automatic filter cleaning, 3.5 h battery runtime, right-hand side brush, gradeability 12%, working speed 6 km/h, suitable for indoor and outdoor use.

Condition: used, Year of construction: 1994, CNC press brake Knedpfeyvfklsx Akijc Manufacturer: Blemas Type: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 191026ä

Condition: good (used), Year of construction: 1980, power: 3 kW (4.08 HP), pressing force: 10 t, stroke length: 300 mm, total length: 1,400 mm, total width: 1,300 mm, total height: 3,300 mm, overall weight: 2,000 kg, Equipment: documentation/manual, safety light barrier, Year of manufacture: 1980 Equipment: – Filter cleaning, upper and lower stroke limit, – 2 operating modes – Venting system – Safety light curtain – Safety distance 110 mm (min.) – After-travel distance 12 mm (max.) Kjdpfxs Aaviis Akisnc

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 14,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 14,000 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,400 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, workpiece length (max.): 5,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 1,400 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 10,500 kg, table width: 1,000 mm, table length: 5,000 mm, table load: 10,500 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, spindle speed (max.): 2,500 rpm, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, Technical specifications Table clamping width 1000 mm Table clamping length 5000 mm Ksdpfx Akj Aazqfeionc Working feed range 1 - 5000 mm/min Speed range 11 - 2500 rpm Spindle taper ISO 50 X-axis 5000 mm Y-axis 1000 mm Z-axis 1,400 mm Main motor power 22 kW Max. workpiece weight 10,500 kg

Year of construction: 2021, condition: used, Year of manufacture: 2021 Knodjz I Adpjpfx Akijc Year of construction: 2021 Field of application: Internal logistics

Condition: ready for operation (used), functionality: fully functional, Outrigger drilling machine UCIMU RP 1580 MP -Outrigger arm approx. 2000mm -Speed range (gearbox) 30 - 1200 rpm -Automatic feed -Drilling table 1300x650x700mm -Morse taper MK 5 -Electrical safety device -Coolant system -Work light -Quick-change tool holder & adapter mounts Dimensions: L x W x H 2.5 x 1 x 2.85 meters / Weight 4500 kg Errors and omissions excepted. Kedpfx Asz S Nb Dokisnc

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Knjdpjxbgrgsfx Akiec Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used,

Condition: used, This listing is for a Tecan Genesis 150 2002 Liquid Handling Station - SPARES ONLY Kodpsxzg I Usfx Akisnc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, Stock item, immediately available -Tmax 1350°C -Usable space L x W x H (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions L x W x H (mm) 4200 x 2500 x 3500 -Space requirement L x W x H (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse rating 250 A -Control system: Stange SE 607 -Documentation Kedpozr U Anofx Akijnc Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -There is the possibility of connecting a liquid nitrogen supply, allowing the furnace to cool down to -80°C. -Internal insulation made of graphite hard felt, CFC-protected and reinforced. We will build a second identical furnace by the end of the year. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspection in our warehouse by appointment! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

Condition: used, Year of construction: 2024, load capacity: 10,000 kg, lifting height: 4,535 mm, total length: 7,400 mm, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 Knodpfxjztgdaj Akioc · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: used, This listing is for Genlab OV/100/SS/F/DIG Oven The unit is in full working condition and ready for immediate use This high-quality laboratory oven features a stainless steel interior, fan circulation for temperature uniformity, and an intuitive digital controller for precise thermal processing. [[1](), [2](?srsltid=AfmBOoqrBx2xG5acm9HXLERUkvFsY4t5ruoXCtKGooEYCW5co-g 0--YA), [3]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Kedszc H Tbopfx Akisnc Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for a IKA Euro-star 100 D S002 Overhead Stirrer The unit is in full working condition and is ready for immediate release The IKA Eurostar 100 D S002 is a powerful laboratory overhead stirrer designed for a wide range of applications, ideal for mixing volumes up to 100 liters of water (H₂O). Engineered for precision and durability, it’s perfect for laboratories needing reliable and consistent mixing performance. Specifications Knodjxv Dg Repfx Akijc Speed Range: 0/30 to 1300 rpm Maximum Stirring Capacity: 100 liters (H₂O) Maximum Viscosity: 70,000 mPas Maximum Torque: 100 Ncm Motor Rating Input/Output: 186 W / 136 W Motor Type: Maintenance-free brushless DC motor Chuck Range: 0.5 to 10 mm Protection Class: IP 42 Interfaces: RS 232 and USB for control and data documentation Dimensions (W x D x H): 86 x 208 x 248 mm Weight: Approx. 3.9 kg Power Supply: 230 V, 50/60 Hz Key Features Digital TFT Display: High-visibility screen for real-time parameter monitoring Removable Wireless Controller: Enhances ease of use and flexibility Microprocessor-Controlled Speed Regulation: Automatically adjusts speed to maintain precision within the set range, even with changes in sample viscosity Integrated Torque Trend Display: Enables real-time monitoring of viscosity changes Safety Systems: Built-in overload and anti-stall protection with automatic shut-off Quiet Operation: Low-noise performance for lab comfort Push-Through Agitator Shaft: Allows quick removal and easy cleaning Error Code Display: Notifies users of system alerts or issues Constant Speed Maintenance: Ensures uniform mixing, compensating for viscosity fluctuation

Year of construction: 1999, condition: excellent (used), SICA-TRK-SY.U 25-160 PIPE SAW for LD-PE and HD-PE PIPES CHIPLESS CUTTING With central clamps with for all diameters Minimum diameter 25 mm Max diameter 160 mm Year of construction 1999 Status: Very good, in working order Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Knsdpfx Aom E Nqyekijc The machine is my property.

Condition: used, Year of construction: 1998, Piovan drying plant 2 x 100 L, year of manufacture 1998 Knsdpfsxuq S Dox Akijc

Condition: used, Used vehicle Vehicle no. 38, AMMANN AVH 100/20 vibratory plate, year of manufacture 2007, Hatz diesel engine with 11.3 kW, hydrostatic drive, operating weight: 707 kg, electric start. For inquiries, please contact or . Errors and prior sale excepted. Kjdpfx Aksz S Sm Ajijnc

Condition: good (used), Adjustable speed380 VoltWith shaking output More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Knodjz Rfvuepfx Akijc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery