Used Ats-Tanner Ms-420S for sale (4,634)

Year of construction: 2024, condition: new, - 10000 mm standard length - 800 mm standard rooler width - 2,2 KW gearbox roller conveyor Nljdpfx Akjbrq R Djuob - 0,75 KW gearbox infeed roller

Year of construction: 2024, condition: new, - 8000 mm standad length - 800 mm roller width - 1,5 KW Gearbox rollerconveyor Nledobu Sb Djpfx Akuob - 0,75 KW Gearbox cross transport

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors Nedpfehmp Ibsx Akuelb - solid pin conveyor chain with gentle rollers

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW Nlodpfxsnyidbs Akusb - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Year of construction: 2024, condition: new, max. cutting height - ø 340 mm min./max. cutting width 80 - 250 mm min./max. side board 18 - 80 mm max. cutting length 6.000 mm feed rate 5 - 30 m/min. sawing motor 2 x 55 kW feed motor 4,0 kW width adjustment motor 0,55 kW infeed roller motor 0,75 kW weight 8,000 Optional equipment Laser adjustment Infeed table extension up to 8.000 mm Automatic width adjustment with 6 fixed dimensions Nledpfju Izkex Akujb Equipment with 1.000 mm dia. blades Motorized log turning device Electronic braking device

Year of construction: 2024, condition: new, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm adjustment times of the widths 0,2-1,0 sec. feed rate 5-30 (70) m/min. sawing motor 37 kW (also more kW possible) feed motor 2,2 kW saw shaft diameter 70 mm weight 3.500 kg Basic equipment 1 adjusting bush 1 fixed bush Digital cutting width display Automatic cutting width adjustment Optional equipment Electric height adjustment of the feed rollers Laser with adjustment device Driven roller gear Nledpfou I D Dox Akusb Electronic braking device

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen Nlsdpfx Aogvu Alokujb - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers Nljdpfx Ajfvbphjkusb - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers Nledpsgp Su Eefx Akueb - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Year of construction: 2024, condition: new, max. cutting length 3.000-8.000 mm min. cutting length 500 mm max. cutting height 80 - 140 mm Nledpoxfzljfx Akujb stepless feed 10-30 m/min. saw motor power 4,0 - 7,5 kW feed motor 1.5 kW number of saw supports 2 - 6 weight 1.000 - 2.500 kg

Year of construction: 2024, condition: new, - 340 mm Cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm cutting length - 3-20 m/min - 2 x 18,5 KW sawing motor - 1,1 KW feed motor - 0,25 KW width adjustment motor - 1300 Kg weight Nledpfxj E Rg Se Akuob

Condition: used, 7001481, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Njdpfx Aot Txayokujlb Model: 7001481 Type: 20 ADVANCED Condition: Used

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Model: 619569.0 Type: 35-40 ADVANCED Nedpfx Akst Txbdjujlb Condition: Used

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Model: 612435.1 Type: 20 ADVANCED Nljdpfx Aket Tw Shsujb Condition: Used

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture Nljdpfsmb U Tbex Akuob • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm Nlodpfxjxnrtcs Akujb for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Nedpfx Ajir E E Ejkuelb Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle Nsdoy Ayiqspfx Akuolb - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: excellent (used), functionality: fully functional, spindle bore: 46 mm, turning diameter over bed slide: 350 mm, turning diameter over top slide: 200 mm, center height: 175 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, three-jaw chuck diameter: 200 mm, A Nardini lathe is for sale in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Nardini Njdoy Ughkopfx Akuolb • Model: MS-175E • Center-to-center distance/turning length: approx. 800 mm • Center height: approx. 175 mm • Turning diameter over bed: approx. 350 mm • Turning diameter over carriage: approx. 200 mm • Max. spindle speed: approx. 2,000 rpm • Spindle bore: approx. Ø46 mm • Röhm four-jaw chuck: approx. Ø 200 mm • Condition: Used, in working order Shipping via freight forwarder available (inquire for ZIP code) International buyers are welcome! You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, ex works. Subject to errors in technical data and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 06/2028, total length: 2,100 mm, total width: 1,100 mm, input frequency: 50 Hz, type of input current: three-phase, electrical fuse: 32 A, Spiral kneader / mixer Model: SP 220 MS LED control with temperature display / temperature control with rewind key Dough machine with 2 timers Tool speed adjustable for min / max. 10 - 220 kg of dough Flour dust hood and bowl scraper 2 tank wagons (340 liters) Standing machine with changing tools Stainless steel tools: kneading spiral, flat beater, whisk DGUV V3-tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Nledof Etm Nopfx Akuob Dimensions: 1100 x 2100 x 1500 / 2300mm, WxDxH NEW machine With a 12 month warranty Come to our sales center with baking equipment and many bakery machines.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 06/2027, total length: 1,900 mm, total width: 1,050 mm, total height: 1,250 mm, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, power: 9.2 kW (12.51 HP), electrical fuse: 32 A, Spiral kneader / mixer Model: SP 250 MS LED control with temperature display / temperature control with rewind key Dough machine with 2 timers Tool speed adjustable for min / max. 10 - 160 kg dough Flour dust hood and bowl scraper 2 tank wagons (250 liters) Standing machine with changing tools Stainless steel tools: kneading spiral, flat beater, whisk DGUV V3-tested Connection 400V, 10.6 kW, 32A 32A-CEE plug Dimensions: 1050 x 1900 x 1250/2100 mm, WxDxH NEW machine With a 12 month warranty Nlodpfsf Epwnsx Akusb VISIT our sales center with bakery equipment and many bakery machines

Condition: used, Year of construction: 2017, Kuka KR 420 R3080 Industrial Robot (2017) 420kg max. load 3076mm max. range 2415kg weight control unit KR C4 (2014); handheld Njdpfsy Uxrzjx Akuslb PLEASE NOTE: Tooling/moulds and any product related gripping tools are not included! Please note the items in this lot 29381-75 are simultaneously offered in the combination lot 29381-36 as a complete cell. The separate parts of the complete cell 29381-36 are offered as individual lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet * Nedou Rni Hjpfx Akujlb

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Nlsdpfxogmf Rnj Akuob Grinding wheel diameter: 610 CNC: 5 axis (new)

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Nlodpfxok Abtas Akuob Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik