Used Automatic Cleaning System for sale (52,534)

Year of construction: 1997, condition: used, Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes. Additional title: crown caps, aluminum screw caps Bedpfxjztzbmj Aqwell Crown caps: 24000 pc/h Aluminium screw cap: 24000 pc/h Power: 1,7 kW Voltage: 3 x 380 V Length: 1,3 m Width: 0,6 m Height: 1,1 m Weight: 70 kg Material: stainless steel Base construction: Rectangular storage container with lid, base made of square tube Features: level indicator Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Bodpfx Aeu R Szyeqwoll Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine -

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Bsdpfjzkkb Djx Aqwsll Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, Cleaning system that is the ideal solution for cleaning a wide range of parts with complex shapes; 2 units available. Blodpfjy D Rh Hox Aqwsl

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Blsdpfx Aswr Dxhoqwsl

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Bjdpfsxhquxex Aqwsll Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation. Blodoymn R Njpfx Aqwol

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Blsdpfxsr R Ewlj Aqwsl Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Motor-powered lathe, optional Euro 500 + VAT Bedjtxdpxjpfx Aqwoll Suction motor power:: Kw. 4 Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) Bljdpewyc Sijfx Aqwsl - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. Bledpfsf A Nq Aex Aqwel In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Year of construction: 1993, condition: ready for operation (used), A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible. Bljdpfxozhw S Ds Aqwol

Condition: new, connected load frequency 230 V battery 24V / 100Ah Blsdovu Hccjpfx Aqwel Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Year of construction: 2023, condition: ready for operation (used), A Mafac two-tank spray flood cleaning machine is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, tank volume 1/2: 425l/300l, machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 1000kg, operating hours: 4531h. Documentation available. An on-site inspection is possible. Bledpfxjzhnrhs Aqwsl

Condition: used, Year of construction: 2009, working width 1150 mm working area: 5700 m²/Std. Bjdoxpxrnepfx Aqwjll total power requirement 3,0 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,6 x 1,2 x 1,6 m Sweeper with charger

Condition: as good as new (ex-display), Year of construction: 2025, Manual operation Temperature control via a digital thermostat. DIMENSIONS External dimensions: 1490 x 900 x 970 mm Internal dimensions of the cleaning tank: 900 x 600 x 640 mm Usable working dimensions: 870 x 525 x 400 mm Operating height: 970 mm Capacity of the cleaning tank: 351 l Material: Stainless steel. Thermoacoustic insulation: 50 mm ULTRASONIC Transducer: Piezoelectric Ultrasonic power: 4 kW Ultrasonic frequency: 28 kHz Frequency sweep: Yes Power regulation: 16 positions Heater: 7.5 kW Blodpfef Hqayox Aqwsl Lid: Manual Drain valve ("): 1 ¼ " Touchscreen: 4.3 " Heater timer: Yes

Condition: used, Year of construction: 2018, functionality: fully functional, total width: 1,381 mm, total length: 3,170 mm, total height: 2,056 mm, maximum load weight: 40 kg, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, 2-chamber ultrasonic cleaning system with a goods lift and manual transfer unit to move items from chamber 1 (cleaning) to chamber 2 (rinsing). Oscillation/movement of goods is performed via the goods lift. Basket: 600x400x400h mm - Loading can be done directly at the goods lift from the front. Bljdpfxozgwqwo Aqwel Both chambers are equipped with ultrasonic transducers (at the bottom); frequency: 40 kHz, power: 1200 watts (peak 2,400 watts). Chamber internal dimensions: 750x450x520h mm, volume: approx. 120 liters; chamber material: stainless steel 1.4571. Both chambers are equipped with an oil separator (manufacturer: Belki) and a candle filter (9 3/4" - fineness 100 or 50 microns, selectable). Heating in both chambers: 2 kW each. Connection power: 12 kW - supplied ready for connection with a 32-ampere plug.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind Blodezl E Afepfx Aqwol scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths Bsdpfoxlb E Aox Aqwell - correspondence desks - various

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Hydrokinetic vacuum washing system "RH500V" with water/detergents The cleaning process can be carried out by spraying, immersion and ultrasonic action. Usable dimensions of the basket: 450x300x200h mm Maximum load weight: 100kg Blsdpfxjrlnfqj Aqwjl • Washing tank (430 lt.) - electric heating • Rinsing tank (280 lt.) - electric heating • Basket rotation: fixed - complete 360° rotation - oscillation. • (controlled by PLC). • Motorized rotating washing sprayers • Hot air drying with dedicated vacuum pump. • Electronic level sensors. • Ultrasound 1000w – 25khz • Double external translating loading pallet integrated in the fairing. • Matt “Matte” painting. • PLC Siemens S7-1200 - Touch screen Siemens KTP700. • Year of production 2025. New system used for tests in our showroom and exhibited at some trade fairs. Possibility of carrying out washing tests before purchasing. Available for immediate delivery from the parent company: Union S.p.a. – Sala Bolognese (BO), Italy.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Bjdpfoyvv Trjx Aqwsll Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: used, Automatic Welding System Brand: Motoman / Robotec Bledex Dbiropfx Aqwsl Model: W45/635/2.2/F1CS - A45 G59 Single-station welding system composed of: * 2 six-axis anthropomorphic robots * 1 two-column positioner Wire welding (MIG/MAG)

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2013-5191, Ultrasonic cleaning system, less than 2 operating hours Bodpfx Aqjxqnqpewoll

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. Bledsum Uflspfx Aqwel - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: used, Year of construction: 1998, working width 1000 mm battery 24 V weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 1,0 x 1,4 m Bedszlukfjpfx Aqwoll Ride-on sweeper - incl. charger