Used Automatic Feeding for sale (27,490)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Ljdjy S Rw Depfx Aiijab Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2014, Ref. no.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a running plastic production line and is in clean and good cosmetic condition. The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems. The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS INCLUDED IN THE SYSTEM Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies. Technical Details • Brand: Aerzen • Model: GM15L • Year: 2014 Ledpfoy Tliwox Aiioab • Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • High-efficiency German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for centralized vacuum systems Rittal Industrial Control System The system is equipped with a Rittal industrial control cabinet. Rittal is a globally recognized premium brand in industrial automation and control systems. Features • Industrial control cabinet • Operator control system • Integrated safety circuits • CE-compliant construction Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Safe working area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems. Technical Details • Brand: DMN Westinghouse • Model: ALD 200-6 • Low-dust controlled material transfer • Suitable for granule and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for centralized conveying systems

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive: 5.5 kW Accessories: support tables Tool holders, cutters Lsdey Tmvfspfx Aiisab Coolant system Digital display Weight: 4 t Price: EUR 3,000 – plus VAT ex location

Condition: good (used), Year of construction: 2017, - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 Laodpfxoy Tm Dco Aiijb - Vacuum suction pads: included

Condition: used, mileage: 165,525 km, power: 103 kW (140.04 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,620 kg, maximum load weight: 880 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,500 mm, brakes: other, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, airbag, electronic stability program (ESP), fog lights, power assisted steering, sliding door, soot filter, * German vehicle * 1st hand * Condition, see photos * Strobel ambulance body * 1 extendable berth * Aluminum carrying table * 1 companion seat with safety belt * Partition wall with sliding window Laedpexl Snnjfx Aiieb * Rear air suspension * Storage compartments and lighting * Ventilation - and ventilation via roof hatch * Foiled windows left and right and in the tailgate * Additional heating in the passenger compartment * Sliding door on the right with window * Extendable step * 2 seats * Automatic transmission * Electric windows * Heated electric mirrors * Central locking with remote control * ABS, ESP * Airbag * Fog lights * Wheelbase 3,500mm * GVW. 3,500 kg. * Unladen weight 2,620 kg * Payload 880 kg * The sale to tradesmen or export is subject to 19% VAT If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: like new (used), Year of construction: 2018, input voltage: 230 V, We offer this Dürkopp Adler 755 S automatic pocket edging machine, in like-new condition, manufactured in 2018. Type: DAC Comfort Serial number: 700-1702-000403 DA number: 9850 755500 Voltage: 230 V Frequency: 50/60 Hz Power: 375 W Lodpfxey S Td Tj Aiioab Protection rating: IP40 If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement. Ledpfx Aisy Tx N Roieab

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Lajdpfxokpwuus Aiieb Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Year of construction: 1997, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW Ljdpfsy S D Rqox Aiioab weight of the machine ca. / t required space / m

Condition: used, Year of construction: 1978, cutting diameter / mm saw band length 8800 mm cutting width / mm Ljdpfoy S Drbsx Aiioab total power requirement / kW weight of the machine ca. / t required space / m

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned Lodpfxey S Dwwe Aiioab manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, Semi-automatic table punching machine Working width max. 340 mm Punching thickness up to 3.5 mm (recommended 2.0-2.5 mm) Mechanical cycle rate up to 1,200 per hour Tools: 2:1, 6.0 mm, Ø 2:1, 6 x 6 mm, Square Laodpfey Tzdkox Aiijb

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm work piece width max. 28 mm workpiece height max. 27,5 mm milling motor 2 cut-off saw 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Lodpfx Aoy Ty Hqeiisab Work sequence: 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 1101420, Offer 26077 Lsdpfx Ajy Ddpdsiieab Technical specifications (approximate): - Control system for fully automatic operation - (Feed rate, cutting speed, automatic material feed, etc.) - Cutting range at 90°: - Round: 260 mm - Flat: 300 x 260 mm - Smallest material dimensions: round / flat: 15 / 10 x 15 mm - Smallest section length: 10 mm - Scrap length in automatic mode / manual mode (approx.): 130 / 40 mm - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, continuously variable: 20 - 140 m/min - Cutting pressure, continuously adjustable: 0 - 10 m/min - Hydraulic material clamping with tension pressure adjustment - Coolant system - Total drive power: 400 V / 8.0 kW - Space requirement (approx.): W 2700 x H 1600 x D 2450 mm - Weight (approx.): 1800 kg - Roller conveyor length: 2000 mm

Year of construction: 2009, condition: ready for operation (used), A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible. Lajdpfxsy Tn Nme Aiieb

Condition: ready for operation (used), A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Laedpsy Tn Nyofx Aiisb

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,187 h, functionality: fully functional, machine/vehicle number: 14396, spindle motor power: 11,000 W, spindle speed (min.): 8,000 rpm, spindle bore: 26 mm, overall weight: 7,000 kg, feed length X-axis: 170 mm, feed length Y-axis: 55 mm, feed length Z-axis: 150 mm, feed rate X-axis: 55 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 75 m/min, bar diameter (max.): 28 mm, bar length: 3,000 mm, number of spindles: 8, Equipment: documentation/manual, MULTISWISS 8 x 26mm TURNING CENTERS. Year 2018, with 16,000 operating hours. Machine in perfect working condition. 8 independent spindles controlled by a CNC SIEMENS system. 3 spindles with Y-axis movement. Bar feeder for 3m bar length, up to 26mm diameter, with a magazine for 34 bars (26mm). CO2 extinguishing system manufactured by KRAFT&BAUER. Mist extraction system. Lodpfxjy Txy Ao Aiijab

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Lajdpow Enquefx Aiijb Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 12 units in stock

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Ledpfjy Tqahox Aiijab Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2001, Kaiser Punching Press Model: KSTU 4000-25-6P Press force: 4,000 kN Table size: 2,500 x 1,250 mm Ram surface: 2,500 x 1,100 mm Shut height: 700 mm Ram stroke: 40-250 mm Ram adjustment: 200 mm Strokes per minute: 20-100 1/min Control: Siemens S7 Required space: 4.8 x 3.2 x 4.8 m (LxWxH) Weight: 78,000 kg PBK Straightening Machine Strip width: 120 - 800 mm Strip thickness: up to 6.0 mm ARKU Decoiler Load capacity: 8,000 kg Ledpfx Ajy Tp U Djiieab

Condition: used, mileage: 567,802 km, power: 103 kW (140.04 HP), first registration: 03/2015, fuel type: diesel, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2015, AUTOMATIC TRANSMISSION AIR CONDITIONING DRIVES NORMALLY = Further information = Cabin: single Engine displacement: 1,968 cc Unladen weight: 1,923 kg Payload: 876 kg Gross vehicle weight: 2,800 kg Contact Thierry Leemans for more information. Lajdpfjy Sp E Hjx Aiiob

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm Lodpfxotqqrfe Aiijab cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm capacity 45 degrees: round 140 mm capacity 45 degrees: flat 250 x 40 mm cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Lodjv Hth Aspfx Aiisab Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, Lsdpsvh I Tvjfx Aiioab coolant

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant Ljdswm Rm Iepfx Aiisab