Used Autotherm 6-Circuit Temperature Control Unit for sale (84,428)

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, type of input current: AC, input current: 10 A, DGUV certified until: 06/2027, Jufeba TG 1-3 T temperature control unit TOP table-top unit with container Stainless steel design Dry heating system Manual temperature control Robust technology 230V connection Used unit, cleaned With warranty + spare parts service Djdjxiu Hbopfx Adrjcn Optional: Maintenance contract Stainless steel GM container Delivery service Training & commissioning Visit our large showroom!

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater Dcjdpog Ewwrjfx Adrsn -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: 20 mA Dodpfx Adozbx Rpsrecn PT 100 sensor Flow measurement Alarm

Year of construction: 2004, condition: defective spare-parts repository (used), Manufacturer: Wittmann Model: TP-PLUS-2:90 Incomplete Dsdpeyk Tnnsfx Adrjcn

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. Dedpfehgr Ihox Adrjcn The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Dcodpozd Ruwsfx Adrsn Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Dcsdjy St Urjpfx Adrjn

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, DGUV certified until: 07/2027, Jufeba temperature control unit Tabletop model: TG 2-2 T Stainless steel design Dry heating Simple temperature control Top-quality technology Dodpfx Ast U Uxuedrscn Connection: 230V, ready for plug-in Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & SAB inspected Many other temperature control units in stock!

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Djdpsxhfi Refx Adrscn Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Dcsdpfx Aex Emfwsdrjn Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: Water

Condition: good (used), Year of construction: 2007, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate Djdpfxsiyzn Dj Adrjcn -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.

Condition: good (used), Year of construction: 1999, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit Dcedpfxeqmt Acs Adrsn -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Dodpfx Ajy Suavodrecn

Year of construction: 2001, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal Dedpfxezhn Tfj Adrscn for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 2001 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC O/N RA8616-0Y4A-46 Dcedewywi Aopfx Adron S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Used, in very good condition

Year of construction: 1998, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW dimensions 0,90x0,25x0,70 m weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 1998 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz Dedpfszhn Tlsx Adrocn - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Condition: new, Control Techniques Commander SE SE22T 15 kW Frequency Inverter – New New and unused Control Techniques Commander SE variable frequency drive. Technical details: Manufacturer: Control Techniques Series: Commander SE Model: SE22T Part No.: SE43401500 Rated power: 15 kW Input: 3-phase, 380–480 V, 50/60 Hz Input current: 27.4 A Output: 3-phase, 0–480 V Output frequency: 0–1000 Hz Output current: 30.5 A Serial No.: 2050601671 Designed in the UK Condition: New / unused The frequency inverter comes from surplus industrial stock and has never been put into operation. Condition: New / unused surplus stock. Sold as-is, without warranty or guarantee. Dcedsz D Tcujpfx Adren No claims or returns. The buyer is responsible for verifying compatibility and suitability for the intended application. Immediately available from stock in Rotterdam, The Netherlands.

Condition: used, CNC path control system, computer, control unit, logic unit Heidenhain type TNC 426 PA Logic unit LE 426 PA, year of manufacture approx. 1994 Part No.: 286 839 39 Serial No.: 5 400 265 Installed modules: - Computer board type R9, Part No.: 292 115 01 / Serial No.: 5 357 032 - PLC graphics type S3, Part No.: 291 073 01 / Serial No.: 5 315 111 - Control circuit board type G3, Part No.: 291 064 01 / Serial No.: 5 447 727 - Power supply, Part No.: 289 133 01, Serial No.: 5 329 344 / R10 - LE 415 B neutral, Part No.: 267 223 CC / Serial No.: 5 618 369 / S4 - Drive, Part No.: 289 135 02 / Serial No.: 5 482 860 Housing dimensions L x W x H: 475 x 330 x 195 mm Weight: 11.6 kg In good condition. Dcodpez E Smuofx Adrjn

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Dcedev E Uirjpfx Adrjn

Condition: excellent (used), Year of construction: 2009, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Key features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-down valves in a leak-proof design • Compact check valve combination, which guarantees continuous operational reliability while maintaining high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve beds on the wet side • High-quality desiccant Dodoypb Duepfx Adrscn During adsorption, the desiccant absorbs the moisture contained in the compressed air. Parker Zander uses only highly active desiccant of the molecular sieve type with high capacity. This desiccant guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: Operating pressure: 7 bar Inlet temperature: 35°C Pressure dew point: -40°C in a cycle with: - 5 minutes adsorption - 4 minutes desorption - 1 minute pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and therefore inevitably results in 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system, with new, groundbreaking functions and a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with multitronic. The multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of cycle times is possible. • LEDs on the front for the individual functions, such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including a digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of manufacture: 2009 Manufacturer's price: €8,880

Condition: ready for operation (used), Fanuc A06B-6050-H203 Velocity Control Unit, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Dcedpfxsi D Uwkj Adren

Condition: used, Year of construction: 2015, Temperature Controller Wittmann TV0000086 (2015) Manufacturer: WITTMANN Model: TEMPRO plus D Type: Temperature Controller Part Number: TV0000086 Dedpfx Aoz D T Idsdrocn Year of Manufacture: 2015 Maximum Temperature: 160 °C Number of Circuits: 1 Heating: Electrical Heating Capacity: Approx. 9 kW Pump Type: Magnetically Coupled Circulation Pump Pump Capacity: Up to 30 l/min Maximum Pump Pressure: Approx. 5 bar Control System: Microprocessor Control Temperature Regulation: Automatic / Self-Optimizing Application: Mould Temperature Control for Injection Moulding Marking: TP+D-S-1:160, SO-C, S+OP

Condition: good (used), Bosch Turbo Scara SR 800EC robot with IQ 150 controller and PHG 2000 handheld device Manufacturer: Bosch Order No. 3842506428 Serial No. 764840020 Maximum load at the gripper flange: 100 N Stroke of the 3rd axis: 320 mm Dcedpfx Adehbmvpjren Pneumatic pressure: 4-8 bar Weight: 100 kg Swiveling range: see diagram Item condition: used In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, forklifts, and shelves are plentiful. In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 business days. You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2014, condition: excellent (used), Double finisher 842 Multimatic with control, manufactured in 08/2014, original price €20,110. Dcedpfx Adegtidheron Garment shaper and pant finisher rotatable on a single column. Finishing process in a closed cabin. Integrated cabin extraction system, automatically controlled. Doors close automatically. Flexible processing of different garments and sizes. Computer control with nine freely programmable memory locations. Airflow regulation for particularly delicate garments. Space-saving and virtually no emissions in the working area during the finishing process. Heated by external steam or fully electric with a built-in electric steam generator. Are you looking for an all-in-one solution for jackets and other items? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, blazers, coats, trousers, and similar items can be automatically finished. It consists of a form finisher and a pant finisher. The two devices are rotatably mounted on a single column. To finish, the previously loaded element (form finisher or topper) is swung into a cabin. The doors close automatically, and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low noise, and minimal space requirements. Manufactured in 08/2014, original price €20,110. The machine is in perfect working order. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, operating hours: 7,593 h, load capacity: 4,500 kg, lifting height: 3,180 mm, mast type: duplex, fork length: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,180 mm Fork length: 2,200 mm MACHINE DETAILS Mast type: Duplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,600 x 1,500 x 2,400 mm Dead weight: 6,413 kg UVV valid until: 04/2027 Next service due in: 564 hours Dcedpoz Iwi Tjfx Adron Operating hours: 7,593 h EQUIPMENT 3rd + 4th valve Free-lift mast without central hydraulic cylinder Formerly a Still full-service unit Hydraulic fork positioner Side shifter Full cab Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) StVZO lighting with turn signals for road approval Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 32