Used Ayel-Tech Dzg-5 for sale (61,190)

Condition: used, This listing is for 1 of 4 Kinbio Tech YK1225-Shanghai Assembly Roller Conveyor Bjdpfxsxzg H Dj Amzjlk

Year of construction: 2022, condition: new, Niro-tech RX-150 single shaft paddle mixer Bledpfx Ajhqnppsmzok This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave system System and functional description Microwave system consisting of two MW50 V microwave modules, an inner roller conveyor and two outer roller conveyors. The actual microwave chamber consists of a 3 mm stainless steel sheet and has switch cabinet segments permanently mounted on the long side in which the high-frequency components are installed behind mechanically and electrically secured covers. The roller conveyor system for transporting the pallet within the system is manufactured in microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which emit energy directly into the chamber interior. This technology guarantees an even distribution of energy within the chamber. The magnetrons can only be switched on when the door is closed and pressed down. The sealing system at the door opening prevents microwave leakage radiation. Any vapors generated are extracted via 2 extraction fans with a total capacity of 17,000 m*/h (free-blowing) . The necessary cooling of the high-frequency components takes place via the air flow of the extraction fans, supported by 4 supply air fans (free blowing capacity a' approx. 3,500 m*/h). A roller conveyor with its own drive is located in front of the system. The pallet is loaded and unloaded manually by the customer. Initiators are used to check whether the pallet is correctly positioned on the roller conveyor. The program is started at the control panel using a switch. The loaded pallet is transported into the microwave unit and positioned using a light barrier. The doors of the microwave system are closed and the microwave exposure is switched on . After the microwave exposure time has elapsed, the door is opened and the pallet is transported onto the unloading roller conveyor. The switch-on time of the magnetrons can be preselected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Bedpowhvcwefx Amzolk Voltage: 400 V 50/60 Hz Connection: 70 kW Back-up fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and weight Microwave oven: (LxDxH) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight; 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolutely new condition The machine has never been in use New price €300,000 Financing through our bank is also possible. komplett-konzept.leasingo.de Further ovens in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Bljdsx Dm Rzjpfx Amzok Power consumption: 0.09 kW/h Speed adjustable.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Blodpspy Uzysfx Amzek Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Bljdofx N Uiopfx Amzsk Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Condition: new, Year of construction: 2010, functionality: fully functional, space requirement width: 2,700 mm, space requirement length: 3,500 mm, space requirement height: 2,600 mm, overall weight: 5,200 kg, pressure: -1 bar, operating pressure: 6 bar, temperature: 200 °C, filter area: 2.5 m², operating temperature: 200 °C, Reference: C13598 316 stainless steel ATEX nozzle filter drier, 3V Tech 250 FPP/SD FM, with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industries. Material 316/316L stainless steel Technical specifications Model 250 FPP/SD FM Year of manufacture 2010 Body working pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Case/jacket working pressure -1/+10 bar Case/jacket working temperature Bsdpfxjwpf Sqo Amzolk -25/+200 ºC Case/jacket volume 80 + 20 L Equipment configuration ATEX Electrical panels Bag filter Hydraulic unit Centrifugal pump Transport information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 kg Documentation CE certificate Certificate ATEX Maintenance Manual Operating Manual Drawings Electrical Diagrams Filtration Area Filtration Area 2.5 m² Condition Unused Manufactured by 3V TECH

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise machining with high output Materials: Plastics, composites such as CFRP/GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary engineering, boatbuilding, automation _____ Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-10) Spindle data: 8 kW / 6.4 Nm; 1,000-36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,000 x 600 Control: FANUC Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Blsdpex S E Nbjfx Amzsk Tool breakage and length control: Renishaw TS 27 R Miscellaneous: on request Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting Bsdox S Etmspfx Amzjlk - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Blsdpfxox Uw Sto Amzok Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (max.): 36,000 rpm, spindle speed (min.): 1,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Bledpfx Aexdwndemzok Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2025, feed length X-axis: 80 mm, feed length Y-axis: 80 mm, feed length Z-axis: 60 mm, Perfect for: Applications in model and mold making, as well as milling of other materials – a versatile powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composites such as CFRP / GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary equipment, boat building, automation _____ Reference number: 1210 Available from: immediately CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Bljdpjx S Eqlsfx Amzok Spindle data: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 m/min Workpiece dimensions X/Y/Z: 3500 x 1500 x 700 mm Control: SIEMENS – Sinumerik One with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length monitoring: Renishaw TS 27 R Other: on request Year of manufacture: 2025 Condition: new

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,785 mm, travel distance Z-axis: 280 mm, overall weight: 5,500 kg, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 3 m/min, spindle motor power: 8,000 W, Equipment: documentation/manual, The machine worked until the end in Sweden at the moment it is undergoing a service inspection. It has two milling units Blodouzmyrepfx Amzsk

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Blodpfx Asyymkcsmzsk Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Main motor: 18.5 kW Automatic waste feeding Bjdpfx Amexgfwxjzolk

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Main motor: 18.5 kW Automatic waste feeding Bodexgfriepfx Amzslk

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Bjdpfxjxy Nt Ro Amzelk Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks

Condition: used, mileage: 554,096 km, power: 150 kW (203.94 HP), first registration: 04/2015, fuel type: diesel, next inspection (TÜV): 03/2028, color: black, gearing type: automatic, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, * €6,900.00 NET * Mercedes-Benz E 300 BlueTEC HYBRID, Navigation, Leather, PDC, LED, EURO 5 * Seats: 5 (2+3) * Automatic transmission * Armrest * Radio/CD * Leather steering wheel * Front, side, and additional airbags * Tinted windows * Cruise control * Automatic climate control * Electric seat adjustment * Multifunction steering wheel * On-board computer * Hill-start assist * Bluetooth * Rain sensor * Tire pressure monitoring system * USB * Electric windows * Electrically folding side mirrors * Electric mirrors * Central locking * Tire pressure monitoring system * Lane keeping assist * Traction control * Navigation system * Fatigue warning system * Emergency braking assist * Isofix * ABS * ESP * Start/stop automatic system * LED daytime running lights, LED headlights * Hands-free system * Alloy wheels * Fog lights * Full leather interior * Parking assist, front and rear (PDC) * Wheelbase: 287 cm * Unladen weight: 1745 kg * Payload: 645 kg * Permissible total weight: 2390 kg * Passenger car registration * Vehicle number: 30 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT INFORMATION Telephone: WhatsApp E-mail: Bjdoyvdv Tepfx Amzolk Transit and customs license plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features must be verified separately. The condition as per the contract is only that which is inspected on site and confirmed in writing at the time of purchase. Please arrange an appointment.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: TET031P5-NF - 2200346063, cooling capacity: 8.98 kW (12.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 331 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.5 m³/h, pump pressure: 5 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler / chiller / chilled water unit, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact chilled water units suitable for outdoor installation (-5°C to +46°C). Includes crankcase heater, phase monitoring, 115-liter buffer tank, integrated P5 high-pressure pump, open expansion tank (14 liters), and evaporator in a NON-FERROUS design. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Chilled water temperature outlet/inlet (°C): 7 / 12 Volume flow (m³/h): 1.5 Available pump pressure (bar): 5 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3, Max. power consumption (kW): 6.6 Max. current (A): 12 Starting current (A): 47 Protection class: IP54 Dimensions: Length (mm): 1315, Width (mm): 660, Height (mm): 1373, Weight (kg): 331 Connection: Rp 1" Serial number: 2200346063 Year of manufacture: 2019 Condition: Visually 2-3, Technically okay Used Price: upon request in Euro (plus VAT, ex works Nettetal) – 3 months warranty Used machines may have optical defects due to their use. Bljdpfx Aow S Ef Ismzok (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Year of construction: 2020, operating hours: 635 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 40838, Used Raypa Food Tech CFS-V150 Food Autoclave used for small batch manufacture of tins, jars and pouch food products. Features rapid cooling cycle and counter pressure to prevent damage to packaging. 150 litre internal volume and 3 wired baskets for food products. Requires 3-phase power, pressured water supply and floor drain for installation. Full manufacturer's service history, calibration records and documentation. Bsdpfxezpfi Te Amzjlk

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Bledpfjwm Iz Njx Amzsk Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Bodozqdbdopfx Amzelk Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET251P3 - 2200399023, cooling capacity: 49.7 kW (67.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 998 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 8.48 m³/h, pump pressure: 2.61 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, Process air cooler/chiller/chilled water unit, air-cooled, Type: TAEevo Tech 251 P3 – 49.7 kW MTA S.p.A. Bodpeznk Hhofx Amzelk TAEevo Tech 251P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Includes crankcase heater, phase monitoring, 350-liter buffer tank, and built-in P3 circulation pump. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 49.7 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 8.48 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 27 Max. current (A) 46 Starting current circuit (A) 144 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Price: upon request in Euro (plus VAT, ex works Nettetal) – 3 months warranty Serial no.: 2200399023 Year of manufacture 2023 Condition: Visually 2, Technically okay Used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, mileage: 584,536 km, power: 150 kW (203.94 HP), first registration: 04/2015, fuel type: diesel, next inspection (TÜV): 03/2028, color: black, gearing type: automatic, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, * 6,900 € NET * Mercedes-Benz E 300 BlueTEC HYBRID, Navigation, Leather, PDC, LED, EURO 5 * Seats: 5 (2+3) * Automatic transmission * Armrest * Radio/CD * Leather steering wheel * Front, side, and additional airbags * Tinted windows * Cruise control * Automatic climate control * Electric seat adjustment * Multifunction steering wheel * On-board computer * Hill-start assist * Bluetooth * Rain sensor * Tire pressure monitoring * USB * Electric windows * Electrically folding side mirrors * Electric mirrors * Central locking * Tire pressure monitoring * Lane keeping assist * Traction control * Navigation system * Driver fatigue warning * Emergency braking assist * Isofix * ABS * ESP * Start/Stop system * LED daytime running lights, LED headlights * Hands-free system * Alloy wheels * Fog lights * Full leather interior * Parking assist front + rear (PDC) * Wheelbase: 287 cm * Unladen weight: 1745 kg Bjdpfx Asy Ac Ntjmzelk * Payload: 645 kg * Permissible total weight: 2390 kg * Passenger car registration * Vehicle No. 56 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Telephone: WhatsApp E-mail: Transit and customs license plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features must be verified separately. The condition of the vehicle according to the contract is only what is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment.

Condition: new, mileage: 25 km, power: 90 kW (122.37 HP), first registration: 06/2025, fuel type: electric, axle configuration: 4x2, fuel: electricity, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, full service history, onboard computer, power assisted steering, power mirror, = Additional Options and Accessories = - Passenger airbag - Third brake light - Driver airbag - Remote central locking Bedpszmhapofx Amzolk - Height-adjustable driver's seat - Height-adjustable steering wheel - Multifunctional steering wheel - Rear parking sensors - Radio/CD player - Rearview camera - Bumpers in body color = Additional Information = General Information Number of doors: 5 Cabin: single Technical Information Torque: 245 Nm Unladen weight: 2,067 kg GVWR: 2,067 kg Battery Battery: 52 kWh, Condition: 100% Charging connector: Type 2 Number of phases of the charger: 3 Battery charging power: 22 kW Interior Interior: gray Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12, 7621HL BORNE, NL