Used Azo Gmbh Azo Gmbh E800 Sieve Machine Centrifugal Sieve for sale (103,171)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. Bdjdpoz Hngmjfx Ahmsh At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2008, operating hours: 134,157 h, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,300 mm, feed rate X-axis: 55,000 m/min, feed rate Y-axis: 55,000 m/min, feed rate Z-axis: 55,000 m/min, total length: 12,200 mm, table width: 2,050 mm, total width: 8,000 mm, total height: 7,800 mm, rapid traverse X-axis: 55 m/min, rapid traverse Y-axis: 55 m/min, rapid traverse Z-axis: 55 m/min, position of the milling head: vertikal, torque: 32 Nm, tool weight: 6,000 g, control cabinet length: 600 mm, control cabinet height: 2,200 mm, control cabinet width: 3,600 mm, tool diameter: 100 mm, As a manufacturer, we are pleased to offer you this portal milling machine from FOOKE GmbH. This machine combines dynamics and precision in a perfect way, making it the ideal choice for machining large components. X = 7,500 mm x Y = 3,500 mm x Z = 2,300 mm Swivel milling head 5 with CNC-controlled A and C axes Compressed air supply to the milling head High-frequency milling spindle (HSK63A, 24,000 rpm, 32 kW) CNC control HEIDENHAIN iTNC 530 (refurbished in 2015) Bdsdpfx Ahoz Da Tmomsh Linear motor drives in the X, Y, and Z axes Exclusive machine table Machine dimensions: Width approx. 8.00 m Depth approx. 12.20 m Height approx. 7.80 m Weight approx. 120 tons Machine operating hours: 134,157 Spindle operating hours: 36,706 Contact: Do you have any questions or need further information on a customized retrofit? Then please send us a message via the platform or call us. As a manufacturer, we look forward to assisting you!

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. We will gladly provide further technical documentation or detailed images upon request. Bodjzy E I Dspfx Ahmodh Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted.

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, Bedpfx Ajzqr Hnohmjdh 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Pressure range: -1 to 3 bar (drying chamber), 6 bar in the double jacket Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Bdodeitcvuopfx Ahmsh Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Double coat, Mechanical seal, PT100 thermometer, Shaft heating with Maierkopf HWR 225, Sight glass, Technical documentation. Condition: Used very good Price: on request

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Bdsdpfez Ap R Iox Ahmoh Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS Bdjdpfx Aeyynlzshmeh YOM 2019 NEW CONDITION WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES STILL IN PRODUCTION TILL MAY 15TH

Year of construction: 2015, condition: good (used), Description Features - PCB Control Board - PCB Control Panel to Clear Inform Error Message - Well Heating Blade System to Ensure Film Clean Cutting - Well Heating Elements to Ensure Fast and Stable Heating to Achieve Perfect Shrinking Specifications Bdjdpfsvk Upvox Ahmeh Manufacturer EKH Model -455 Condition Used Power supply 220/230/240V., 50/60HZ., 1-PHASE Maximum consumption power 3.77Kw Effective power consumption 1.6-2.3Kw Sealing dimension Depth 420mm X Length 550mm Maximum height of package 250mm Machine dimension Length 1320mm X Width 820mm X Height 645mm Maximum dimension of film 600mm X Ø250mm

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. Bjdpfozl Rfxox Ahmjdh The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Bdjdpezz Agmefx Ahmjh Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: Bjdpfjzux Iysx Ahmedh 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Year of construction: 2024, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Bdedpfsz Hax Uex Ahmjh Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Bodpfxsz A H Sgo Ahmedh Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: new, Year of construction: 2025, Sharpening of woodworking tools The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Made in Switzerland Swiss Quality = Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. Bdodpjb Dt Ixofx Ahmsh • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A Bsdjrq D D Espfx Ahmodh 4pcs available

Condition: used, Year of construction: 2015, Technical details: Bdedpszgu Aqefx Ahmoh x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. *

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Bedezuxn Tspfx Ahmjdh Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2004, condition: good (used), Load capacity: 3000 kg Bodpfx Asz Hzcushmjdh Dimensions: Height: 3300 mm Width: 2900 mm Depth: 230 mm Weight: 300 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL Bdodpfx Ajzb Ipzohmeh 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. Bdjdszzk Tbspfx Ahmjh The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Year of construction: 2024, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 4729, Condition: like new, only approximately 20 operating hours Delivery: June 2024 Original purchase price: €98,000 Includes ultrasonic screen cleaning system for a mesh size of 0.090 mm Bjdpfx Ajz Etwnehmodh Screen area: 5.3 m² Screen diameter: approx. 2,600 mm Overall height: approx. 1,964 mm Installation dimensions according to drawing: approx. 1,950 × 1,950 mm Nominal speed of the screen body: 225 rpm Motor power: 5.5 kW Power supply: 400 V, 50 Hz Maximum product temperature: 80 °C Maximum permissible negative pressure: -5 mbar Static empty weight: approx. 2.77 t

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Bdedpszxwx Eefx Ahmeh Ground fault monitoring, adjustable.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Bdjdpfezy Upkox Ahmjh Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Bdjdpfx Ahsz D Evysmsh Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm Bsdpfx Aezf Nk Tohmjdh UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller