Used Bacci 1994 Bacci Fch8 for sale (316)

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Lasdpfx Aeuddh Aocfjf Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Mileage: 24,691 km ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating * 90 km/h according to the documents Lodpfowawdgjx Acfoaf * Compressed air connection for external filling of the brake system * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: used, mileage: 891,508 km, power: 338 kW (459.55 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 10x4, wheelbase: 7,250 mm, fuel: diesel, brakes: engine braking, color: blue, gearing type: automatic, emission class: euro5, suspension: other, total length: 10,860 mm, total width: 2,550 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 1,240 mm, Year of construction: 2011, Equipment: AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, trailer coupling, = Additional options and accessories = - Remote-controlled central locking - Refrigerator - Tow hitch - Radio - Rear view camera Ljdpfxeztxiuj Acfeaf - Sun visor - Spotlights - Toolbox = Notes = Effer 91 NL4S Year 1994 In 2011, rebuilt and upgraded to: - Effer 108 N 5S Radio remote control. 5 x hydraulic extension. 1 x manual extension. 2.39 m - 27.550 kg. 4.65 m - 18.200 kg. 6.38 m - 13.050 kg. 8.23 m - 10.000 kg. 10.18 m - 8.000 kg. 11.81 m - 6.830 kg. 14.04 m - 5.100 kg. Manual extension 16.33 m - 4.150 kg. = Further information = Technical information Number of cylinders: 6 Axle configuration Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 50%; Tire tread right: 50%; Brakes: Disc brakes; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 40%; Tire tread right: 40%; Brakes: Disc brakes; Suspension: Leaf spring suspension Center axle: Tire size: 435/55R22.5; Steered; Tire tread left: 70%; Tire tread right: 70%; Brakes: Disc brakes; Suspension: Hydraulic suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Brakes: Drum brakes; Suspension: Hydraulic suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Brakes: Drum brakes; Suspension: Hydraulic suspension Weights Unladen weight: 30,455 kg Payload: 19,545 kg GVW: 50,000 kg Functional Crane: Effer Maintenance APK (technical inspection): valid until 01/2027 Financial information Price: Upon request Identification Model number: X 5240 TS 10x4 / EFFER 108-5S CR = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: excellent (used), Year of construction: 1994, Roland 202 TOB, built in 1994 Laodpfx Acsx Sqdqjfef Maximum size: 74 x 52 cm (29 x 20 inches) counter: 31 million

Year of construction: 1994, condition: used, Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer's data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats - A mini : 20mm - A maxi : 85mm - B mini : 12mm - B maxi : 60mm - C mini : 50mm - C maxi : 170mm Carton feeding: suction cup picking Product feed belt: cell chain Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available Ledpfsx R D A Rex Acfeaf

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Lasdpjwkiicjfx Acfsf

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Ljdjurwy Nepfx Acfjaf

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Laodpfx Asw R Uziecfof

Year of construction: 1994, condition: ready for operation (used), A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026. Lsdjw U Ua Tjpfx Acfsaf

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Lajdpeucw Tisfx Acfjf

Year of construction: 2015, condition: ready for operation (used), Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/formats: 1l VdF/12-case/6-case KuKa, 0.75l VdF/12-case KuKa, 0.2l/30-case KuKa, 1l/12-case carton. Viewing possible by appointment. Lasdpfjx Aupvox Acfjf

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Lodpfx Acozugnzefoaf Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, mileage: 27,180 km, power: 130 kW (176.75 HP), first registration: 03/1994, fuel type: diesel, empty load weight: 7,010 kg, maximum load weight: 2,490 kg, overall weight: 9,500 kg, axle configuration: 4x4, wheelbase: 3,700 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 9, total length: 7,000 mm, Year of construction: 1994, operating hours: 154 h, construction height: 3,100 mm, Equipment: all wheel drive, differential lock, trailer coupling, The Iveco FF 95 E 18W LF 8/6 is a used fire engine with extensive features, ideal for use in demanding environments. This special vehicle has a robust 4x4 drive and a 5.9-liter diesel engine with an output of 130 kW (177 hp). The machine is equipped with a 6-speed manual gearbox and offers space for up to nine people, making it perfect for emergency teams. The equipment includes a rear pump FP8/8 and a fire water tank with a capacity of 600 liters. The vehicle's operating hours are only 154 hours and the mileage is 27,180 km. The vehicle dimensions are 7,000 mm in length, 3,100 mm in height and 2,500 mm in width, with a wheelbase of 3,700 mm. The permissible total weight of the vehicle is 9,500 kg. The vehicle was built in 1994, it was looked after by a previous owner and has the red paintwork typical of fire engines. Air dryer. Additional heating. Rear pump FP8/8. Fire water tank 600L. 154 operating hours. Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved. Laedpfx Acor Uzfqjfjf

Condition: good (used), Year of construction: 1994, machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers Laodpsd R Saqsfx Acfef • electric counter • delivery conveyor to the right

Year of construction: 1994, condition: good (used), Built in: 1994 Size: 330 x 260 mm Speed: 18.000 c/h Equipment: gathering chain & feeder: • 8 station gathering track & chain • 6 single bases • 1 double base • 6 feeders 343 • 1 cover folder feeder 344 stitching unit & trimmer: • stitching unit 301 • 2 stitching heads • three knife trimmer 304 Laedpfsdyk Rcex Acfof • copy control

Condition: used, Year of construction: 1994, functionality: fully functional, Martin Dickenhobel T 43, 63 cm Year of manufacture: 1994 2 cutterblocks Keyed cutter guards Resharpenable planer knives 5.5 kW motor with brake Electric table height adjustment With digital display 4 feed speeds: 6, 9, 12, and 18 m/min Maximum chip removal: 8 mm Planing width: 2 - 250 mm Rubber infeed and outfeed rollers Dust extraction connection: 160 mm Weight: 1050 kg Includes spare planer knives and knife setting gauge Operating manual Lajdpfxjztz S Ss Acfof

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Lasdpoztqrnjfx Acfof Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: used, AD thickness planer KDR STÖ310, year 1994, incl. transport unit, 2.2 kW, 1270 mm table length, 310 mm table width, 3 knives, 250 kg Laedpfex H Uddsx Acfef Price changes reserved, subject to errors, misprints and typographical mistakes.

Condition: used, Year of construction: 1994, operating hours: 8,163 h, Type of fuel: Diesel Colour: Grey Empty weight: 14.000 kg Dimensions (LxBxH): 440 x 237 x 411 cm Lifting capacity: 10.000 kg Lift height: 493 cm Fork dimensions: 1.640 x 2.270 mm Lsdjyr D Sgopfx Acfjaf - Year: 1994 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1907 - Operating hours: 8163 - Lifting capacity: 10000kg - Lifting height: 4930mm - Overhead clearance: 4110mm - Free lift: 0mm - Fork length: 1640mm - Maximum fork width: 2270mm - Minimum fork width: 590mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Radio, Full cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Volvo - Transport dimensions: 4400mm x 2370mm x 4110mm (l x w x h) - Transport weight [kg]: 14000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Manufacturer: MÜLLER MARTINI, year of manufacture: 1994, serial number: 94.00398.01 Laodpfx Aoy Ez Umscfof

Condition: used, Year of construction: 1994, type of input current: three-phase, Equipment: documentation/manual, I am offering a continuous-flow rotary mixer from Wöhr, available due to a company liquidation. Includes control system, sand hopper, and sand feeder. Spare blades for the mixing screw are also included. The machine is currently still connected and was operational until the company closed. Lajdszb Eh Uspfx Acfef Year of manufacture: 1994 Capacity: up to 5 t/h Siemens spare parts, as well as a laptop with software and memory chips, are included. 2 folders with documentation. For self-dismantling. More photos and details, as well as a viewing appointment, are available upon request. Please feel free to contact me via classified ads with your price offer. For self-dismantling. Dismantling can be organized for an additional cost. Sale ONLY to businesses. An invoice with VAT will be issued. Without warranty.

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Laedpfxoyxfqre Acfof Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: repair required (used), Two desiccant dryers in need of repair. Suitable for a DIY enthusiast or as a source of spare parts. Type MDC 800 Capacity: 42 kW Year of manufacture: 1990 and 1994 Laodpfx Acextvb Iefof PRICE REDUCED FROM 2850 TO 1500 EUR!!!

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls Lsdpozrpu Ejfx Acfsaf - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) Lsdpezrppcefx Acfsaf yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available