Used Baykal Baykal Aphs 31200 for sale (339)

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm Dcodpfxsznngxj Adron down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Dcodpovgc R Hsfx Adron Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter Dodpfxszlpahj Adrscn - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: used, functionality: fully functional, Year of construction: 2004, sheet thickness steel (max.): 4 mm, cutting length (max.): 200 mm, Type HKA 200 x 4 Capacity 200x200x4mm Variable angle adjustment Dedpfx Asv Efu Sodrecn Blades reground

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Dedpfjya Hwzox Adrscn

Condition: used, Year of construction: 2025, - Year: 2025 - Documentation available: Yes - CE certificate present: No - Drive type: Hydraulic Dedpfxewnipds Adrocn - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 2100 - Backgauge depth [mm]: 750 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2009, overall weight: 13,000 kg, total width: 3,000 mm, total height: 2,200 mm, cutting length (max.): 3,060 mm, product length (max.): 4,000 mm, CNC shearing machine manufactured in 2009. This Baykal HNC 3100x13 features a cutting capacity of 13 mm and a cutting length of 3,060 mm. It is equipped with a powerful 30 kW motor and operates at a working pressure of 260 bar. If you are looking to get high-quality shearing capabilities, consider the Baykal HNC 3100x13 machine we have for sale. Contact us for further details. • Cutting Capacity (St42): 13 mm • Power Supply: 380 V / 50 Hz / 3 Ph • Motor Power: 30 kW • Working Pressure: 260 bar Dsdpfx Aozc Rgxsdrocn • Strokes per Minute: 14

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Dedpjwnagtofx Adrscn

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates Dcedpsyq Szmjfx Adrjn - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: excellent (used), functionality: fully functional, Baykal hydraulic guillotine shear type HNC 8100/6 working width 8100 mm maximum sheet thickness 6 mm motorized backgauge automatic blade gap adjustment automatic cutting angle adjustment Dedex Rbhdopfx Adrecn sheet support device

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW Dcsdpfxjxab Ero Adrsn weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Dodpfx Ajxaci Eedrocn Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 Dcodpezp D T Defx Adren • Supplied new in 2021 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 3,480 and 5,448 • 4 m x 10 m bed

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: H345, type of input current: three-phase, Equipment: documentation/manual, MPS EF330-6 UV flexographic label printing press, year 2008, machine no. H345, with approx. 30 million metres. The press was previously used for aluminium lid stock printing in Switzerland. Main equipment: - 6-colour UV flexographic printing press - GEW UV curing system: 5 × VCP + 1 × E2C, 6 e-Bricks - Heavy-duty unwind and rewind - 6" plus 3" unwind shafts, and 3" rewind air shaft - Roll lift on unwind and rewind - BST web guide with ultrasonic sensor - BST Powerscope web inspection - Vetaphone corona treater - Double-sided Teknek web cleaner - Automatic servo register - Rotary die-cutting station + Kocher & Beck GapMaster - FST edge trimming with two crush knives - 6 anilox rollers - 7 magnetic cylinders + 42 print cylinders mady by Spilker, covering repeats from 8" to 13.25" Dcodpfez Itb Sjx Adrsn The machine has a documented service and maintenance history, including the original MPS installation documentation, GEW UV servicing, Bosch Rexroth servo maintenance and BST web-guide upgrade. Current condition: The press is operational and can be inspected under power. The Cool Master process chiller currently requires repair and is not in service. The GapMaster requires re-synchronisation following replacement of a support cylinder bearing. There is no known mechanical defect; adjustment requires the appropriate setup gauge.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm Dsdpfx Aeu Upafsdrjcn - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: excellent (used), Year of construction: 2016, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: A305/K1161, WDB flexo printing machine for UV inks. 4 printing units, printing width 1350 mm. The machine was used as a test machine for development purposes and has seen little use. The printing machine is operational and can be tested at any time. Dodexqml Eopfx Adrecn

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 1361, product width (max.): 330 mm, working width: 330 mm, product height (max.): 1,000 mm, number of drawers: 8, power of the servo motor: 75 W, roll diameter: 70 mm, year of last overhaul: 2023, type of input current: DC, overall weight: 8,600 kg, total height: 2,300 mm, total length: 10,000 mm, total width: 1,500 mm, warranty duration: 0 months, Equipment: documentation/manual, OMET FLEXY – 2008 MODEL • 8 Colors • Printing Width: 33 cm • Cold Foil + Hot Foil Djdsz Di Efspfx Adrscn • Reverse-Side Printing • GAP MASTER + 3 Separate Die-Cutting Units • Full UV Coating • Motor Power: 100 kW

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Djdpopxmxcofx Adrscn Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying – 6 drying units. Compressed air: 7/8 bar. Maximum web width: 270mm Dedpfx Adsyr R Sgerscn Minimum web width: 150mm Maximum feed length: 220mm Minimum feed length: 50mm Maximum printing width: 260mm Maximum printing length: 305mm Maximum length of the semi-rotary cutting die: 220mm Maximum permissible unwind roll size: 3000m Unwind roll diameter: 800mm Rewind waste roll diameter: 450m Rewind roll diameter on the automatic splicer (AS): 360m Maximum speed: 10,000 impressions/hour The machine is currently in production. An inspection can be arranged by appointment. Details are available in the PDF file. For further information, please do not hesitate to contact us.

Condition: excellent (used), Kortho Graphicjet X-18 inkjet printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced hi-res inkjet for 18mm high prints Launched in 2015, the X-Series Graphicjets are Kortho's latest and most advanced hi-res inkjet printers. Machine-wise, the X-Series printers with their capillary ink system are a further development of our proven 18P. However, the X-Series printers have a Windows operating system. In addition, its Nicelabel Windows driver makes it possible for this printer to print directly from any Windows software or ERP system. The X-Series has an 8″ color touch screen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. Additionally, this printer can print at speeds of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Print area of 18 x 1000 mm Resolution of 185 DPI Print speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Coding on cardboard (boxes), paper and many other absorbent materials A compact print head housing and 60 cm supply cable ensure easy installation Its non-pressurized capillary ink system ensures that this printer is not affected by changing environmental conditions Dcsdpfetpwt Iex Adrsn Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touch screen in any language you want Starts up within seconds Extensive graphics, text and barcode functions Windows-based operating system Equipped with Windows driver for network integration Equipped with Ethernet connection and USB ports 100% NiceLabel compatible On-screen label design and management software (no external device required) Low consumption costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP system CE certified Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, product width (max.): 1,240 mm, working width: 1,200 mm, type of input current: three-phase, overall weight: 8,300 kg, total length: 6,500 mm, total width: 2,700 mm, We offer this very good Lisheng YTC 41200 flexographic printing press, year of construction 2019. 4 colors 1200 mm width. Excellent condition can work for many more years. We bought a new machine from the manufacturer so there is no need to worry about after sale parts they have it all. Film printed: PE, PET, BOPP, CPP Manufacturer: Lisheng Model: YTC 41200 Year of construction: September 2019 Printing cylinder: 330 mm 350 mm 380 mm 450 mm 500 mm Dcedpfx Adjz Egz Heron 550 mm 600 mm 700 mm Anilox cylinder lPI & BCM 300 5.8 300 5.4 350 5.2 400 4.4 400 3.4 200 8 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2004, functionality: fully functional, product width (max.): 500 mm, We are offering an EDALE flexographic printing machine with a total of 8 printing units and two die-cutting stations. Dedpfexhd A Asx Adrjcn

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: A06D, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: A06D, year of manufacture: 2006, maximum air pressure: 8.5 bar; MFR: 568 L/min; good condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of stainless steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Djdpoz Dh Ulofx Adrjcn Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price 4.990 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 1999, machine/vehicle number: P9970, functionality: fully functional, operating hours: 8,000 h, input voltage: 400 V, type of input current: three-phase, pivoting range: 360 °, rip fence adjustment: CNC-controlled, rotational speed (max.): 18,000 rpm, rotational speed (min.): 12,000 rpm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, ANDREONI PROGRESS 20 – Automatic, robotic engraving pantograph Year: 1999 CNC controlled! 20 workstations, 200 mm cutter spacing, pneumatic workpiece clamping. High-power spindles, 1.1 kW. The machine is in excellent condition due to moderate use. The manufacturer is still in operation and is located in Milan (Italy). Numerous tools included. Dodpfxozltxuj Adrecn Conveyor belt for chip removal.

Condition: excellent (used), Chromatography System – Teledyne Isco CombiFlash Companion/TS Flash Dodpeyk Enaefx Adrjcn The CombiFlash Companion, a personal flash chromatography system, can be controlled and monitored from anywhere with any internet connection and Microsoft Windows® Explorer. It even notifies you via email as soon as the separation is complete. The system's advanced automation and communication features provide maximum productivity and peace of mind. This allows you to focus on other tasks while the purification process is running. The touchscreen controller allows you to operate the system locally on a clear display. The optional solvent management module controls up to four solvents online and monitors their levels, ensuring you never run out of solvent. The Companion uses precision-packed RediSep® Rf columns to obtain more pure material in less time than with glass columns or other disposable columns. Columns ranging from 4 g to 330 g can be quickly exchanged without additional hardware – for simple and fast scaling from milligrams to tens of grams of purified sample. The CombiFlash Companion automatically detects the column size and programs itself with the optimal conditions for that column. To start the run, simply press "Play". Because the software is specifically designed for purification and not for analysis, you can change method parameters in real time. To adjust the gradient during a run, simply click on a point in the gradient profile and drag it to the desired value to immediately modify the solvent mixture. Power supply: 100/117 V AC, 50/60 Hz; 234 V AC, 50/60 Hz Dimensions (W x H x D): 540 x 490 x 490 mm Weight: 27.2 kg You can find more items – new and used – in our shop! International shipping costs available upon request!