Used Bts-Mf100 Waste Baler, Cardboard, Foil for sale (5,406)

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Psdpjy S Rqwjfx Agkegn Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram Pgjdpfx Asy R Nnfogkon o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2018, Overview  This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  Capacity: 67 cartons/min (x6) Formats: 1000 ml – 3×2 – single lane 500 ml – 6×4 – single lane Application: Cardboard packaging (wrap-around) for PET bottles Configuration: Wrap-around case packer Pjdpfxjy A Nd Dj Agksgn

Condition: used, Year of construction: 2013, operating hours: 3120 h, with loading fork Pjdpfx Agjy Rvm Iskjgn

Condition: new, Folding carton / folding box stable Color: brown 2-flute 590x460x1397 mm Carrying straps Quantity: 1 x pallet with 140 pieces You can find more cardboard boxes - in other sizes - in our store! Psdpfx Agsu Dmzbokegn International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, total width: 1,600 mm, total length: 1,800 mm, overall weight: 5,600 kg, TMZ (Gaueh) die-cutting press H-142, manufactured in 1986, size 900x1400 mm, 5 mm hardened die-cutting plate, hydraulic lubrication system – without safety cage Pedpfx Agoyan I Iokjgn

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Podpozc Hkyofx Agksgn

Condition: not inspected (used), functionality: unexamined, Modular, touch-screen system delivers precise pattern control, quality verification, or both. Collection of Nordson Logocomm control systems with two 4-channel controllers and two industrial monitors. We acquired an inventory of hot melt equipment, which included these controllers. Since we will not be using this ourselves, we are offering it for sale. Items are sold without warranty, as is where is. Pgjdpfjy Rtbcsx Agken

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput Pgedped Hkqhsfx Agksn - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Pgsdpfszdn H Rsx Agkon Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Pgjdjzdny Rjpfx Agkjn Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. Pgodpfxszdnxge Agkjn The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, For sale: Universal palletizer, manufactured by Piepenbrock. Cardboard palletizer with/without interlayer insertion, capacity up to 600 cartons/hour. Includes row pusher, layer centering, and empty pallet magazine with roller conveyors. Podpfevvahbex Agkjgn Equipped with a new Siemens S7 control system.

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Podpfx Agjzgui Dskegn Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, Equipment: CE marking, Offer Title: Complete Production Line for Cardboard Angles/Edge Protectors Manufacturer: SIA Model: Edge Protector 130x130, Slitter 1500x1500, SCC Base 7 Year of Manufacture: 2025 Working Hours: 100 hours Technical Condition: Like new State: In production Edge Protector Specifications: - Size: Minimum 35x35mm, Maximum 130x130mm - Wall Thickness: Minimum 1.5mm, Maximum 8mm (10mm optional, depending on paper thickness) - Maximum Reels: 12 + 1 craft - Speed: 50m/min (60m/min optional, available on data regulation) - Glue heating - 7,5kw. Slitter Rewinder Specifications: - Reel Size: Maximum 1500x1500mm, Minimum Width 500mm - Minimum Cutting Width: 35mm - Number of Knives: 15 - Speed: Maximum 250m/min - Electrical Power: 11kW SCC Air Compressor Specifications: - Base: SCC Base 7 VSD TD - Electrical Power: 7.5kW - Air Volume: 0.92m³/min - Tank Volume: 500 liters Pgsdpfezgwvyex Agkjn Dimensions: EDGE PROTECTOR ; SLITTER : Length: 26000 mm; 3000MM - Width: 3000 mm ; 2300MM - Height: 2500 mm ; 1300MM - Weight: 6000 kg ; 3500KG

Condition: as good as new (ex-display), Submersible Waste Water Pump, Drainage Pump, KSB Ama-Drainer A 405 SD/10, New/Unused Machine in Box Manufacturer: KSB Aktiengesellschaft (Frankenthal, Germany) Type: AMA-DRAINER A 405 SD/10 S-H Overall dimensions : 290 x 290 x 520 mm Pedpfx Asza Td Isgkjgn Design: Submersible drainage/waste water pump with stainless steel housing Power output: 0.76 kW Rated current: 1.70 A Voltage / Frequency: 380–415 V 3~ (Three-phase) • 50 Hz Flow rate (Q): 2–21 m³/h Delivery head (H): 9.3–3 m Max. liquid temperature: T40°C Insulation class: Classe F Enclosure class: IP 68 (Max. immersion depth: 10 m) Standard: EN12050-2 Country of origin: Germany Designed for long service life under continuous operation. Suitable for drainage, wastewater handling, and emptying pits or tanks. Comes in its original factory packaging with cable.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Pgodpowuk Nrsfx Agksn Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Pgsdpfx Agjht Hlloken

Condition: new, Year of construction: 2024, Facility managers and property management companies are familiar with this problem: on collection day, when the garbage truck empties the bins, all bins must be at the collection point. If the waste containers are usually located in the underground garage, the caretaker has to move all the bins up the ramp of the underground garage. This is time-consuming and physically demanding, or even impossible to do alone. A 240 kg garbage bin, when filled with waste paper, can weigh over 200 kg, and an 1100-liter garbage container can even weigh over a ton. In such cases, the caretaker needs the help of a second person, which is costly. Weber offers time-saving and health-friendly solutions for this problem. Ask us about our garbage bin frames for 1100-liter garbage containers and our garbage bin carts for 120 and 240-liter garbage bins. And yes, we also offer battery-powered towing vehicles. Health-friendly Psdpei Nnrusfx Agksgn Effective 400 kg payload Galvanized Can be connected to each other Professional equipment - not for use on public roads Adapter: Ball head Hitch

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, input current: 2 A, empty load weight: 144 kg, input frequency: 50 Hz, For sale Robotec Ropotape 50 M, with delivery table Box length: 150 mm – ∞ Box width: 110 – 500 mm Box height: 110 – 500 mm Conveyor belt speed: 22 m/min Height of side guide belts: 50 mm 2 side guides to keep the top flaps of the box straight Lockable casters on the machine legs Tape dispensers: for 50 mm wide tape (optional 75 mm) Box weight: max. 50 kg Work surface height: 670 – 850 mm Pgodpfxszd Ew Ts Agkon Machine dimensions: 1055 mm x 946 mm x H=1625 mm Machine net weight: 144 kg Electrical connection: 3 x 400 V, 50/60 Hz Power requirement: 0.4 kW

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Pedpfx Aezgc Uuegkjgn Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: - MABEG feeder - 2 x transverse foil - 3 x longitudinal foil Pjdozd T Hpepfx Agkegn - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) - Hologram option (electronics refurbished in 2020) - 6 heating zones Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: excellent (used), Heidelberg Cylinder SBD PZ 90 Control System – Technical specifications: 4 impression cylinders, 4 heating zones, foil capacity: 20-800 m, working capacity: 3600 sheets/h, max. sheet size: 64 x 90 cm, min. sheet size: 29 x 45 cm, foil working size: 54 x 82 cm. Pedpfx Agjzd Tw Uskogn

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0306, total width: 1,500 mm, total length: 5,800 mm, total height: 1,600 mm, type of input current: three-phase, BEMA S.r.l. 800 td Well-maintained machine for producing freezer bags and ZIP bags. Pgodpfx Agszgb Akoksn Please contact us for further information.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1973, total width: 1,950 mm, total length: 5,650 mm, total height: 1,920 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 7 bar, overall weight: 2,300 kg, type of input current: three-phase, CAPACITY 250 pcs/min CAPACITY (REINFORCED BAG) 100 pcs/min BAG WIDTH 830 mm BAG LENGTH 70-1000 mm Pedpfozga T Iex Agksgn BAG THICKNESS 0,020-0,100 mm QTY OF SERVO MOTORS 4 pcs TOTAL POWER 11 kw MACHINE WIDTH 1760 mm MACHINE LENGTH 5650 mm MACHINE HEIGHT 1920 mm MACHINE WEIGHT 2300 kg STANDARD FEATURES - Thanks to the touch operator panel, the bag size, the number of bags, the production speed, the number of bags in the package can be seen, the number of stops in the total count. - There is 1 photocell for cutting printed and unprinted bags - Servo motor controlled pulling rollers help cutting at high speed and with the desired measurement precision. - Thanks to the servo motor controlled welding jaw, strong and quality welding is ensured. - Thanks to the servo motor controlled belt system, the belts work synchronously to the stacking system. - Stoper roller system with servo motor controlled for better stacking - Warp rolls inverter tension control systems - With pneumatic ballerina system - Automatic edge control systems - Automatically stops when the roll is finished - Photocell stops automatically when printing place is not correct - Ability to work in PP, OPP, CPP, High Density Polyethylene ( HDPE ), Low Density Polyethylene ( LDPE ), bags STANDARD EQUIPMENT - Patch handle unit - Handle hole punch - Bottom support welding apparatus - Bottom gusset apparatus - PE side welding (digging) jaw - PE double weld (t-shirt) jaw