Used Cantilever Rack, One-Sided, 2.60M H, 1M Arm for sale (72,025)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Fpjdpfx Aomhhx Iokhsk Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Fedpfsmhhyajx Akhspk Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Fpsdpfx Akjd Tqalohek Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. Fjdpfx Ajh Ek Daokhspk The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Fpedpfxjfdkb Ue Akhek Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Fpodpfx Aomhhf Sekhsk The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Fodpfsmhhl Hox Akhepk 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) Fedpfxomidyfe Akhjpk - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Fjdpfx Ajmkixwjkhepk The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Fedpfx Akjfdkbhehjpk - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg Fodpfoqt Dmyox Akhopk - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Cantilever rack, double-sided, 10 levels, arm extension 380 mm, extendable by 220 mm, height 2420 mm, total depth 1000 mm, length approx. 2700 mm, cantilever arms made of 80 mm U-steel, very robust design, the rack is hot-dip galvanized, weight 1190 kg, rack disassembled for transport. Fsdpfx Aew Icyuskhjpk

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: Fpsdoinigmjpfx Akhsk M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Model. TFU200/L/30/12/S

Condition: good (used), Price plus VAT. The goods are also available in other quantities and designs. This package includes: 8 x uprights, 5,000mm x 1,100m (blue) 56 x crossbeams, 2,700mm (yellow) 112 x locking pins This results in a shelving row with 7 bays, each with 4 levels + floor space = a total of 105 pallet spaces (800kg/pallet). Approximately 70 uprights and 1000 crossbeams are available for this system. Please contact us. Fedpfsibwriox Akhjpk Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 19.70 running meters Shelf depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2400 kg Row load: 12000 kg Pallet spaces: 105 Accessories such as: Floor anchor Connector Load warning signs Impact protection Guard rails Grating Back panel grating Deep shelf support Barrier railing and much more… Just ask us!

Condition: good (used), Price plus VAT. Fodpjibwruefx Akhepk The product is also available in other quantities and configurations. This package includes: 14 x uprights at 5,000 mm x 1,100 m (blue) 78 x crossbeams at 2,700 mm (yellow) 156 x locking pins This results in a racking row with 13 bays, each with 3 levels + a base level = a total of 156 pallet spaces (1,000 kg/pallet). Approximately 70 uprights and 1,000 crossbeams are available for this system. Simply contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 36.50 running meters Racking depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2,400 kg Row load: 12,000 kg Pallet spaces: 156 Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Deep stringers Barrier railings and much more... Just ask us!

Condition: good (used), Price plus VAT. The product is also available in other quantities and designs. This package includes: 160 x uprights, 700cm x 110cm (blue) 1216 x crossbars, 2.70m (orange) 2432 x locking pins Optional: chipboard panels, 38mm, including deep shelf supports, for €100 per level. This results in 8 shelf rows, each with 19 bays, each with 4 levels + a bottom storage area = a total of 2280 pallet spaces (1000kg per pallet). Manufacturer: SLP Type: SL20 Condition: used, good condition Height: 700 cm Length: approx. 8 x 5340cm Shelf depth: 110 cm Bracing: bolted Crossbar length: 2.70 m Shelf load: 3000 kg Bay load: 12000 kg Fodpjid H Umofx Akhjpk Pallet spaces: 2280 Accessories such as: Floor fixings Connectors Load warning signs Impact protection Guard rails Grating Back panel grating Deep shelf supports Barrier railings and much more... Just ask us!

Condition: good (used), Price plus VAT. The product is also available in other quantities and configurations. This package includes: 80 x uprights, 700 cm x 110 cm (blue) 608 x crossbeams, 2.70 m (orange) 1216 x safety pins Optional: chipboard panels, 38 mm thick, including deep support beams, for €100 per level. Fpjdpfxeibwpye Akhsk Results in 4 rows of shelving with 19 bays, each with 4 levels + a bottom storage space = a total of 1140 pallet spaces (1000 kg per pallet). Manufacturer: SLP Type: SL20 Condition: used, good condition Height: 700 cm Length: approx. 4 x 5340 cm Shelf depth: 110 cm Bracing: bolted Crossbeam length: 2.70 m Shelf load: 3000 kg Bay load: 12000 kg Pallet spaces: 1140 Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Deep support beams Barrier railings and much more… Just ask us!

Year of construction: 2019, condition: like new (used), We offer both used and new cantilever racking and pallet racking systems. We will gladly prepare a customized quote for you. To do so, please provide us with the following information: - Length and height of the desired racking, - Number of shelf levels, Fodshr D Dtepfx Akhjpk - Shelf load capacity. If you have any questions, please do not hesitate to contact us. The images are example photos.

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, One side tenoning machine .Face levelling saw , vertical milling cutter .Sliding table on slides .Machine wigo cast iron , stable .Heads set at an angle .Machine has a pneumatic clamping gate .Manual displacement . Fpodpfxsvfv A Hj Akhjk

Condition: ready for operation (used), Year of construction: 2009, Board thickness 60 mm Edge thickness 3 mm Feed advance 25 m/min Sound-proof cabin Yes Glue tank Yes ----- Weight 3300 kg Hours worked Hours under power State good At local norms ----- Status in production Description We are putting our IDM edgebander up for sale as a replacement following the expansion of our production workshops. Here are the technical specifications: Model P-RT4 (productivity) Machine dimensions: 8656 x 900mm 1600mm wide roller table Crawler feed speed: 12-25 m/min Minimum panel size (length x width): 220 x 60mm Panel thickness: 10 to 60 mm Edge thickness from 0.3 to 3 mm Top, bottom, front, rear shape copying, end trimming on independent motors Profiled and flat scraping unit Integrated router shaft for optional panel grooving Edge and panel cleaning system with brushes Safety devices on all covers + environment (machine complies with standards) Fpjdpfx Akjuftubjhek Electronic and mechanical adjustment of all aggregates Automatic part detection and aggregate positioning Granular gluing system with glue tray Integrated edge-roller tray Panel and edge preheating lamps Electronic positioning of pressure rollers Weight: 3300 kg

Condition: excellent (used), Mesh Gratings / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Material finish: hot-dip galvanized Overall width: approx. 1,340 mm (crossbar direction) Overall depth: approx. 1,080 mm (load bar direction) Suitable for frame depth: 1,100 mm Clear support span: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Load bar height: 30 mm Fpodpfx Aksp Duf Nshek or Material finish: hot-dip galvanized Overall width: approx. 1,330 mm (crossbar direction) Overall depth: approx. 1,040 mm (load bar direction) Suitable for frame depth: 1,050 mm Clear support span: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Load bar height: 30 mm We stock mesh gratings for the following rack depths: 1 m, 1.05 m, 1.1 m or 1.2 m This mesh grating is the perfect solution to optimize your racking and provides excellent support for your storage requirements. Price on request – Get professional advice! Looking for additional shelf panels or mesh gratings in other versions? No problem! Our team will be happy to help you design a customized racking solution tailored to your individual requirements. Do you have a rack you wish to sell? Simply send us photos and measurements, and we will provide you with a fair offer. Contact us: BLB GmbH – Contact person: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your site! If you have any questions, please do not hesitate to contact us – we look forward to your call or message!

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 3,600 kg, shelf height: 5,585 mm, total length: 14,000 mm, total width: 2,720 mm, total height: 5,585 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, load capacity per stand: 900 kg, shelf length: 14,000 mm, Equipment: double-sided, DOUBLE-SIDED CANTILEVER RACK IN STEEL, PAINTED RAL 5015, FOR INDOOR USE, OHRA K60K SYSTEM. USED MATERIAL SOLD AS SEEN. COMPRISED OF: - 06 uprights and IPE240 bases, height 5585 mm, max load per upright 3600 kg - 03 uprights and IPE220 bases, height 4985 mm + extensions, max load per upright 3600 kg - 02 uprights and IPE220 bases, height 4285 mm, max load per upright 2700 kg Rack total length: 14,000 mm. Total width: 2,720 mm, or 2,750 mm with L-shaped guide rails. Fpjdpsygddfofx Akhok 88 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg each. INCLUDES cross bracing, connector hooks, and bolts (EXCLUDES floor anchoring bolts). Solid steel L-profile guides, approx. 30 linear meters. Material is dismantled, palletized, tied, and packed, ready for transport. Transport and VAT not included in the price.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 4,474 kg, shelf height: 5,585 mm, total length: 12,600 mm, total width: 2,720 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, maximum load weight: 900 kg, load capacity per stand: 900 kg, Equipment: double-sided, Double-sided cantilever rack in painted steel, RAL 5015, for indoor use, OHRA H60K system. Used material, sold as seen and liked. Composed of: 5 columns and bases IPE240, height 5585 mm plus extensions (total height approx. 7000 mm), 3 columns and bases IPE220, height 4985 mm plus extensions (total height approx. 5500 mm), 2 columns and bases IPE220, height approx. 4285 mm. Rack length: 12,600 mm; width: 2,720 mm, with L-shaped rails at 2,750 mm. Includes 110 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg per arm. Complete with bracing, connecting hooks, and bolts (excluding floor anchoring). L-shaped perforated steel guide approx. 30 meters. Material is disassembled, strapped, and ready for transport (transport at buyer’s expense). Transport and VAT not included in the price. Fpjdpsygmz Hjfx Akhek

Condition: like new (used), Almost new cantilever racks, single- and double-sided, available from stock. Loading marks may be visible on the system. Available quantity: 20 pcs System dimensions: Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/upright Uprights: 4 pcs, 2500 mm high, 90 cm upright spacing Load capacity: 1000 kg/upright Fsdoxcn Ekopfx Akhepk Total system length: 3300 mm Total system depth: 1100 mm Single-sided: 1090 EUR Double-sided: 2000 EUR

Condition: used, maximum load weight: 26,980 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2015, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 89 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, 3-Axle Krone Frigo SDR 27 Pharma Semi-Trailer VIN: 668912 Chassis / Components: * Air suspension // Raise + Lower * Lift axle * BPW Eco Plus axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 30/20%, Middle approx. 40%, Rear approx. 30% * Jost support legs * Plastic diesel tank Body: * Krone Frigo Pharma * Certificate: Pharmaserv * Refrigeration unit: Carrier Vector 1950 * Data logger: Carrier Date Cold * Flower width * Refrigeration unit: Carrier * Diesel hours: 7,833 hrs. * Electric hours: 90 hrs. * Roll-up door * Mains operation * Dimensions: Length: 13.38 m, Width: 2.50 m, Height: 2.65 m * Approx. 89 m³, 33 pallet spaces Weights: * Gross weight: 36,000 kg * Tare weight: 9,020 kg * Payload: 26,980 kg Other: * German vehicle * Valid vehicle inspection until 01/2027 * New vehicle inspection possible New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Fsdpfx Akjzn Dy Iohopk The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you in organizing special transports. Day licenses / export license plates We will gladly help you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you in handling customs matters.