Used Casadei - Scm - Sofort Verfügbar - Libra 35/2 Rtc 110 for sale (86,192)

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Gedpfx Afjtr A Eveuebu Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Number of axles: 3

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm Gbedpfx Afsy El U Dousu – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Gsdpfew Dcccox Afuobu

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Gjdpfjcdr Enex Afusbu Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Gbodpfx Afet Hal Djuou Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: ready for operation (used), Year of construction: 2019, operating hours: 17,000 h, clamping force: 500 kN, screw diameter: 18 mm, Electrical injection moulding machine manufactured in 2019. This SUMITOMO SHI DEMAG Intelect 2 50/360-110 features a clamping force of 50 t and a screw diameter of 18 mm. It offers a maximum specific injection pressure of 2800 bar and a maximum dosing volume of 23 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Intelect 2 50/360-110 machine we have for sale. Contact us for further details. Gbodpfsz Eq Scsx Afusu - Max. Specific Injection Pressure: 2800 bar- Max. Dosing Volume: 23 cm³- Mold Height Min-Max: 160 mm - 350 mm- Tie Bar Clearance: 360 mm- Centering Diameter (Fixed / Movable Plate): 125 mm / 125 mm- Maintenance Group: 1- Core Pulls: 2- Working Hours (Drive): 17000 hrs- Ejector Force: 21 kN- Ejector Stroke: 120 mm- Max. Ejector Speed Stage 1: 333 mm/s- Max. Injection Speed: 200 mm/s- Mains Voltage: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Hot Runner Control: 3 zones integrated, 2.75 kW- Integrated Hydraulic Servo Power Unit: Max. 25 l/min

Condition: new, Year of construction: 2025, Description: Gsdjcqy I Sepfx Afuebu IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: used, Year of construction: 1999, functionality: fully functional, total width: 1,600 mm, total height: 2,000 mm, total length: 2,000 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,187 kg, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, extraction nozzle diameter: 160 mm, input frequency: 50 Hz, input voltage: 400 V, - Italian made - DTR (technical documentation) and CE certified TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum working length: 370 mm - Dimensions of sanding belts (width x length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min - Sanding height adjustment motor power: 0.25 kW - 2 units (aggregates): 1) Grooved steel calibrating roller, Ø 140 mm - Rubber pressure roller 2) Grooved rubber roller + shoe + steel roller - Rubber pressure roller - Aggregate I and II motor power: 15 kW From below: - 3 pressure rollers - Conveyor belt - 3 pressure rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric and manual table lifting (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Operating pressure: 6 - 8 bar Gbedpfxsytp Age Afueu - Extraction port diameter: 2x160 mm, 2x110 mm Machine dimensions: - Overall dimensions (LxWxH): 2000x1600x2000 mm - Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: RS 110-6-2 TF, functionality: fully functional, filter area: 660 m², total height: 10,400 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 9,000 kg, Equipment: documentation/manual, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filtration area, year of manufacture 1997, incl. 3 high-performance fans, incl. ductwork, incl. air recirculation for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system by Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system has been in continuous operation and is suitable for use in larger industrial applications (e.g., wood processing, furniture manufacturing, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Configuration: Central extraction - Year of manufacture: approx. 1997 Gbodpoywflasfx Afusu - Application area: Industry / continuous duty - Robust steel construction - Built for heavy-duty continuous operation Scope of Delivery - Filtration system - Fans - Ductwork - Air recirculation unit - Steel frame / support structure Condition - System was operational until recently - Used, age-related, but solid industrial build quality - Inspection is explicitly encouraged Special Features - Very high air capacity – ideal for large-scale production facilities - Immediately available – no long lead times as with new systems - Heavy-duty construction – durable industrial technology - Attractive alternative to costly new installations - Dismantling support can be organized at extra cost!!!! The offered machine is sold as a used system. Sale is conducted with exclusion of any liability for material defects. The machine is sold as inspected and excluding any warranties. The seller accepts no guarantee regarding the functionality, performance, or suitability for any particular purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the system is to be undertaken by the buyer at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer at the latest upon commencement of dismantling and/or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Godpfxjzmvqvo Afuobu Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: excellent (used), SCM F520 Thickness Planer SCM thickness planer, manufactured in Italy. 4-knife cutterhead Width: 520mm Gjdpfx Afoz I N Nfsuebu Table length: 3000mm Infeed table adjustable in angle Table adjustable up and down hydraulically Infeed table adjustable for concave/convex surfaces Table height display Brake Well-maintained machine, in very good condition. Quiet operation.

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg Gsdpfx Aed Tyaaefujbu - immediately available - Will be shipped within Germany for €90.00 net.

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container. Gedpfx Afjlccvmouebu

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Gbsdpfx Asd Iz Dfofueu Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 7160013, Available: Immediately Gbsdpfx Afspn R A Uouou

Condition: used, Kompakte Tischfalzmaschine für Einfachfalz, Wickelfalz, Zickzackfalz, Doppelfalz. Compact tabletop folding machine for single fold, letter fold, Z-fold, and double fold. Gbedpfx Ajzi Difefusu Falzmaschine / Folding Machine Multipli MB 35/2 Serial-No. 666119 Arbeitsbreite / Working width max 350mm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 2 Taschen / 2 Buckles Bandauslage / Stream Delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Gbedpfx Afoyux Risueu Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: used, Year of construction: 1985, Dimensions of the thickness planer table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Maximum material removal: 8 mm Working height min./max.: 3 / 235 mm Feed rates: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 scoring knives Rotational speed: 5,000 min-1 Motor power: 5.5 kW Manual thickness planer table adjustment via handwheel Gbsdpfx Aoz Agd Ssfuou Setting gauge

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No Gsdoytcl Ispfx Afuebu - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table Gedpsz Hcipsfx Afuobu

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Gjdpfx Afez N Swpsuobu Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Gjdsd R Ev Dspfx Afuebu Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: excellent (used), SCM S 52 Thicknessing Machine - Max. planing width 52 cm - Max. planing height 24 cm Gsdpfx Aez I Ihtefujbu - Electric planing height adjustment - 4 standard knives - 4 feed speeds - Table roller In very good condition.

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) Gjdpfjzln T Hjx Afuebu - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional outrigger beam Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for e.g. grapple or clamp (5th & 6th control circuit), with the exception of the F545 - Hydraulically operated outriggers, operable via remote control - LED work lights - Scanreco remote control with cross lever, charger and carrying straps - Electronic overload cut-out system - Emergency stop and optical alarm (90% and 100%) with adjustable digital swing limiter - FASSI stability control FSC incl. LMB II - From F235 size onwards: double knuckle system with overextending boom up to 15° - Manual extensions for 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-stage hydraulic extension) - Fassi F235 A.2.24 (4-stage hydraulic extension) - Fassi F235 A.2.26 (6-stage hydraulic extension) - Fassi F255 A.2.24 (4-stage hydraulic extension) - Fassi F255 A.2.26 (6-stage hydraulic extension) - Fassi F545 RA2.28 (8-stage hydraulic extension) incl. additional support outriggers Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grapple or clamp (5th & 6th control circuit), except for the F545 - Hydraulically operated outriggers, controllable via remote control - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload cut-off system - Emergency stop and optical alarm (90% and 100%), including adjustable digital swing limit - FASSI stability control FSC including LMB II - From F235 size onwards, double knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th stages available at an extra cost (can be ordered individually for each crane) - For the Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible through one of our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further information = Gbodozln Ttjpfx Afuou Price: On request