Used Cma Roby 5 Ex for sale (62,927)

Condition: used, empty load weight: 3,280 kg, maximum load weight: 6,720 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 7,270 mm, loading space width: 2,490 mm, loading space height: 2,880 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Equipped with a tarpaulin and bows, 2 axles, tandem axle, air suspension, ABS (anti-lock braking system), Edscha, lashing points, side protection, through-loading system, front supports, rear supports, storage compartment, adjustable drawbar. Superstructure: through-loading tandem trailer with tarpaulin and bows, and Edscha cover. GFA axles, drum brakes! Ijdpfx Ajzbiyzei Rstk Spare wheel available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors.

Condition: used, mileage: 1,001 km, first registration: 01/2000, empty load weight: 2,790 kg, maximum load weight: 13,210 kg, overall weight: 16,000 kg, color: white, driver cabin: other, gearing type: other, loading space length: 7,250 mm, loading space width: 2,420 mm, loading space height: 2,350 mm, Year of construction: 2000, Vehicle location: Bovenden, rolling gate Iedpfoua H Evox Ai Rotk Body: Swap body with roller shutter, 2x PRESENT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, first registration: 01/1980, color: white, driver cabin: other, gearing type: other, Year of construction: 1980, Equipment: cable winch, crane, Vehicle location: Bovenden, foldable, 2-point hydraulic outriggers, 1x hydr. extension, cable winch Superstructure: Rear crane Hiab 650/1 with cable winch Load diagram: 1.7m-3700kg, 5m-1250kg! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Iedpfovcq N Njx Ai Rstk

Condition: used, mileage: 97,500 km, power: 58 kW (78.86 HP), first registration: 11/1989, fuel type: diesel, empty load weight: 2,660 kg, maximum load weight: 1,940 kg, overall weight: 4,600 kg, tire size: 185R14C, axle configuration: 4x2, brakes: engine braking, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, loading space length: 3,000 mm, loading space width: 2,250 mm, loading space height: 1,400 mm, Equipment: ABS, cabin, parking heater, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, auxiliary heating, switch 6, leaf suspension, tarpaulin and bows, towing device, tarpaulin, lashing eyes, U-protection, pendulum flaps Body: Platform body with tarpaulin frame Ex-THW, auxiliary hot water heater! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ijdpfsvhia Dex Ai Rjtk - .

Condition: used, mileage: 1,001 km, first registration: 01/2000, empty load weight: 2,790 kg, maximum load weight: 13,210 kg, overall weight: 16,000 kg, color: white, driver cabin: other, gearing type: other, loading space length: 7,250 mm, loading space width: 2,420 mm, loading space height: 2,350 mm, Year of construction: 2000, Vehicle location: Bovenden, rolling gate Body: Swap body with roller shutter, 2x PRESENT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iedpfx Ajt Hx A Iji Rjtk - .

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 5 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, power: 36 kW (48.95 HP), Equipment: CE marking, cabin, lighting, sideshift, trailer coupling, 3 units BAOLI KBD30 new forklifts Year of manufacture: 2022, but unused as they were demonstration machines! 5 - 9 operating hours! 3-ton lifting capacity 2.25 m overall height 4.70 m lifting height 36.4 kW DOOSAN EURO 5 diesel engine Itedpfx Aeyt Itdsi Rok - Triplex full free lift mast - Side shifter - 4th hydraulic circuit to carriage - Load protection grid - Semi-cabin - Lighting system - Simple mechanical forklifts! Sales price: 18,900,-- net each! Low-cost delivery also available!

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: V9042700001, Power: Colour / Mono: 65ppm, A4 Iodpfx Aiou Egzqj Retk Counter: Color total: 1,262,651 // BW total: 753,781 Format (cm): max. 45 x 32 SRA3 Gramatur (gr / m2) : up to 300 Resolution: 1200 x 4800 dpi Colour : 4 colours Equipment / Additional information: The machine can make brochures, staple and fold.

Condition: used, Year of construction: 2021, operating hours: 5,600 h, Equipment: all wheel drive, Komatsu D65EX-18E0 (2021) * Engine power: 164 kW * Operating weight: 20,190 kg * Drive: Hydrodynamic (torque converter) * Undercarriage: EX version * with ripper Iedpfx Aoy Uqu Uei Retk The machine has only 5,600 operating hours and is in like-new condition.

Condition: new, Year of construction: 2025, IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor discharge point, which is especially useful when working with concrete. The conveyor is available in three versions: Ijdozcwvmjpfx Ai Rjtk Fixed Height and Angle Conveyor – a basic model designed for long-term operation at one location. The construction allows additional equipment to be added later, enabling conversion into one of the mobile or adjustable versions. Adjustable Height and Angle Conveyor – a fully mobile solution that allows quick and easy adjustment of conveyor height and angle. The modular base enables easy movement without the need for ground fixing. Automatic Rotation Conveyor – a model equipped with an automatic rotation system that allows quick repositioning of the material outlet without interrupting the production process. Ideal for dynamic construction sites and flexible operation.

Condition: used, mileage: 2,500 km, power: 375 kW (509.86 HP), first registration: 05/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB ACTROS 2651 GIGA STX EXCLUSIVE HORSE TRUCK – 5 horses ///NEW MODEL/// 5 horses, side and rear ramp, -Out, pop-up awning, kitchen below, cellar under the living area, storage compartments around the truck, 6 kW diesel generator, 550 liters of fresh water, 300 liters of wastewater, 5-6 sleeping places, living room, extra-large bed above the bathroom, rear entrance door, video surveillance and temperature monitoring for the horse compartment, LG stand-alone air conditioning, Kabola water heating with underfloor heating, dishwasher, 2 TVs/satellite, high-quality wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating, microwave, refrigerator and freezer, external saddle storage, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and more. Errors/input errors and prior sale reserved. Ijdpoy Uqrysfx Ai Rstk * NET PRICE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSE TRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact Richard Theurer / Andreas Theurer

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2004, operating hours: 8,500 h, Pelle sur chenille Fiat Hitachi Ex 135 année 2004 Iodpfx Ajy Uluvoi Rjtk 8500 h 2 godets

Year of construction: 2016, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Pneumatic material support with lift-up Itodpfx Aioy Tak Ao Rjk Minimum quantity spray device USB Port operation manual Weight: 1400 kg

Condition: used, Year of construction: 2021, operating hours: 1,556 h, 2021 | Kubota U50-5 with 3 excavator buckets | Used Mini Excavator < 7t | 1556 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 64 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ Ijdpey Rrxyefx Ai Rjtk 📌 Inspector's Comment: Machine worked well during the inspection. It has low hours and has been very well maintained. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39892 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2026, condition: new, Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 "LCD monitor and Ruvision software, On-board PC with Windows and 17 "monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor. Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 60 mm, dressing wheel 175 x 12 x 32mm, turning speed of the dressing wheel 200 - 2000 rpm. (stepless adjustable) ,, Oscillating speed of the dressing wheel 3400 mm / min (stepless adjustable), oscillating stroke of the dressing wheel 0-50 / min (stepless adjustable), connected load of the motor of the dressing wheel 0.75 kW (400 V / 50 Hz), Weight approx 1520 kg, dimensions 1340 x 1300 x 1900 mm, colour grey / red. Ijdod R Naaepfx Ai Retk

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer Itsdpfx Aijiyynde Rok > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Itjdpfxeiyynwo Ai Rek More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,189 h, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,570 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Load centre: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Rear tyres type: Superelastic Iedpfx Aisx Ixv Hs Retk Battery voltage: 48V Battery capacity: 620Ah Battery year: 2019 Description: Sideshift, 3rd valve, rear work light, front work light, half cab, heater, load backrest, full free lift, CE certificate, safety light,

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Itodpoyzxyxofx Ai Rjk Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: excellent (used), mileage: 16,644 km, power: 390 kW (530.25 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 400 l, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Low noise - Speed limiter - Refrigerator - Alloy wheels - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Power Take-Off (PTO) = Further Information = Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin tyres Rear axle 2: Twin tyres Body brand: MEILLER H436 Tipping: Rear Technical condition: Very good Optical condition: Very good Registration number: 28-BNB-3 DAF CF 530 8X4 HEAVY DUTY MEILLER TIPPER EX DEMO EURO 6 | PACKAGE | 530 HP DRIVE: 8x4 WHEELBASE: 460 cm LEAF SPRUNG AUTOMATIC TRANSMISSION CF SLEEPER CAB WITH FULL OPTIONS: AIR CONDITIONING, HEATING, NAVIGATION, REFRIGERATOR EU REGISTRATION EX DEMO TRUCK FROM DAF FACTORY ALCOA RIMS TRAILER COUPLING PREPARATION MEILLER TIPPER TYPE: H436 LOADING VOLUME: 20 m³ HYDRAULIC REAR TAILGATE TIPPER MADE OF HARDOX STEEL OIL COOLER FOR HYDRAULICS CE CERTIFICATION Itjdpfx Aowhpqbei Rok ORIGINAL DUTCH TRUCK WITH ONLY 16,644 KM!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Itedpfx Aioiv H Eks Rek Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: excellent (used), Year of construction: 2008, For Sale: Very good condition. Industrie Rex I + spreading belts + hopper with oil lubrication 5/4 row range: 40 - 100 grams Siemens S7 program Iodpow Ebw Iofx Ai Rotk completely complete Videos available showing operation It is possible to inspect the machine at our location. If you have any questions or remarks, please feel free to contact us. Transport by arrangement Kind regards, Leo Holland

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: DC, table length: 600 mm, table width: 600 mm, It is a portable CNC cutting system from the brand manufacturer Thermacut: Input voltage: (VAC) 230V / 120 V, 50/60 HZ, 180 W, 0.5 A Itedpfx Aiev Ai T He Rok Max. cutting area: 3050×1525 mm Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Autogenous cutting area: up to 100 mm Plasma cutting area: up to 35 mm Plasma interface: Yes Burner height control via arc voltage Total weight: 145 KG Scope of delivery: Autogenous torch, nesting software, Operating instructions Mini cutting table: small, portable and robust with water tank for cutting with water 600×600 mm cutting area Grid is replaceable with Drain valve low weight (only 108kg) built-in lockable wheels maximum material load 400 kg can be purchased with plasma device and burner on request!

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Itjdjxlchfspfx Ai Rok Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. Itsdpfx Ajx S Etmei Rsk > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (max.): 36,000 rpm, spindle speed (min.): 1,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Itedpoxdwndsfx Ai Rjk Reference number: 1218 Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Year of manufacture: 2026 Condition: new