Used Cnstamp Punch 28 Degree R1 H140Mm for sale (11,600)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/85/H65 mm -Total weight: 2.5 kg Dodszxzhkspfx Akmewc

Condition: used, mileage: 763,846 km, power: 205 kW (278.72 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 6,830 kg, maximum load weight: 5,160 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 7,005 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2013, construction height: 3,650 mm, Equipment: ABS, tail-lift, trailer coupling, Are you looking for a reliable truck for daily work that has proven itself over the years in demanding transport operations? Then this Iveco EuroCargo ML 120 is an interesting opportunity for your company. Under the hood, the proven 5.880 cm³ diesel engine with 205 kW of power delivers, known for its robustness and high suitability for everyday use. Whether for delivery services, construction site logistics, or material transport, this EuroCargo was built to reliably perform its job day after day. Particularly noteworthy are the practical trailer coupling and the liftgate. This combination makes the vehicle a versatile helper in everyday work and enables quick and convenient loading and unloading. At the same time, you create additional transport capacity and remain flexible in a wide range of applications. Dsdpfxjy Ihq Tj Akmjwc The initial registration took place in November 2013. With a mileage of 763,846 kilometers, this EuroCargo impressively demonstrates what the series is known for: durability, reliability, and a design that can withstand high loads. Especially in the commercial vehicle sector, such mileage is often an indication that a vehicle has been regularly used and has proven its performance over many years. Thanks to the Euro-5 emissions standard and the proven Iveco technology, you get a solid workhorse that is immediately ready for new tasks. Anyone looking for an economical commercial vehicle with extensive practical equipment will find a proven solution for commercial use here. Take advantage of the opportunity to acquire a versatile and ready-to-use Iveco EuroCargo ML 120. Vehicles with this equipment and the practical advantages of a liftgate and trailer coupling are sought-after companions in everyday work – secure this offer before it is sold out. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 427,946 km, power: 205 kW (278.72 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 6,960 kg, maximum load weight: 5,030 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, next inspection (TÜV): 02/2027, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,650 mm, Equipment: ABS, air conditioning, tail-lift, trailer coupling, Are you looking for a reliable truck that perfectly combines performance, comfort, and functionality? Then this Iveco EuroCargo ML 120 is the ideal addition to your fleet. Equipped with a powerful 5,880 cm³ diesel engine and 205 kW of power, this vehicle handles even demanding transport tasks with ease and efficiency. Whether in distribution transport, on construction sites, or during daily delivery trips – the EuroCargo impresses with its robust design and high reliability in commercial use. Particularly practical is the extensive equipment including a trailer coupling and a tailgate lift. This provides you with maximum flexibility in transport and allows you to load and unload goods quickly and conveniently. This saves valuable time and increases efficiency in everyday work. In addition, the air conditioning ensures a pleasant driving experience even on long working days. Dwedpsywpgnefx Akmoc With a mileage of 427,946 kilometers and first registration in November 2013, this vehicle is in an attractive range for companies looking for a proven and ready-to-use truck. The Euro-5 emissions standard and the solid Iveco technology make the EuroCargo an economical and durable solution for a wide range of transport requirements. If you are looking for a powerful commercial vehicle that is ready for immediate use and impresses with its well-thought-out equipment, you should not miss this opportunity. Secure this Iveco EuroCargo ML 120 now and rely on a strong partner that will reliably drive your business forward. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale are subject to change.

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Djdpfx Akez Ahanomjwc Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description Dedpexaa Ekefx Akmswc - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid Dodpfxsxabfro Akmowc - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description Dwjdpfx Asxflftjkmec - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: good (used), Year of construction: 2004, Used CNC punching machine from Finn Power Type: C5 Travel range X: 2580 mm Travel range Y: 1270 mm Punching force: 30 tons Including tools Dwodpfx Ajxphwyekmsc

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. Dsdpfx Aozzny Sskmswc The machine is already in storage. TECHNICAL DETAILS Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Operating manual

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Dodjdzqddepfx Akmswc Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Dwedpfx Asxbh Rdekmec Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet Djdjw Ec U Iepfx Akmswc - Fanfold - Magnetic stripes - Air shock web width 360 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Dedpfez D Ippox Akmswc Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Year of construction: 1986, condition: ready for operation (used), We offer this ready for use K. Widmann 0271E.20 Punched pockets machine, year of construction 1986. Dwsdpfx Aksz Akq Nomoc Control voltage: 220 V Frequency: 50 Hz Operating voltage: 380 V Serial number: 89024E011 Circuit diagram number: A If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3371.76 € 20 to 2000x1250 mm 2000 mm Dodpfx Asynnatjkmjwc 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Condition: new, Landert Engines 112-28-MK-FAM2, liquid-cooled engine, serial number: 89289/002, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Dwedei D I Emopfx Akmsc

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Dsdpfx Aeul S Eaokmowc Used exclusively in single-shift operation Includes tools from WILSON TOOL 51026

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) Dwedpfxsw U U S Ns Akmec - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. Dwedpfx Akoprfbujmoc

Condition: ready for operation (used), Year of construction: 1995, pressure 35.0 t plate thickness max. 8.0 mm throat 830 mm diameter of seal max. 105 mm table: 1500 x 1200 mm work height max. 920 mm Dwedpfx Akozf Nrkomjc die stroke ca. 90.0 mm strokes per minute ca. 200 Pressure power 220 bar oil volume 80.0 l total power requirement 4.0 kW weight of the machine ca. 3200 kg range L-W-H 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction * Solid cast or welded frame (C-shape) * Extremely high punching precision * Compact design = small footprint * Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: * â??top dead centerâ? - Continuously adjustable control for: * â??bottom dead centerâ? - Digital position display - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Djdpfxexcndye Akmjwc Stroke triggering via foot switch Assortment of tools is included in the price Very good condition

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Dsdpfx Aozzkybskmswc Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Weight 295 kg Dsdpfxezzkxwe Akmjwc

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Dedpfx Akozzk Dgsmswc Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: used, mileage: 481,394 km, power: 205 kW (278.72 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 6,830 kg, maximum load weight: 5,160 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,400 mm, Equipment: ABS, tail-lift, trailer coupling, For sale is an Iveco EuroCargo ML 120, first registered in 08/2013, featuring an eye-catching yellow exterior. This proven commercial vehicle is designed for professional use. Powered by a robust 5,880 cc diesel engine in combination with a durable manual transmission, the EuroCargo delivers reliable performance and efficiency, even under heavy-duty conditions. With a mileage of 481,394 km, the vehicle demonstrates its solid construction and suitability for long-term, intensive operation. The vehicle is equipped with a practical tail lift, greatly facilitating loading and unloading operations, as well as a trailer hitch, providing additional flexibility for various transport tasks. The available COC document enables hassle-free registration, including for export. The Iveco EuroCargo ML 120 meets the Euro 5 emissions standard, combining rugged engineering with versatile application possibilities. Ideal for businesses seeking a dependable, functional, and immediately ready-for-use commercial vehicle. Dwodpfsx Awakox Akmec Sale exclusively to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.