Used Concept Stal - Cs-Gpw for sale (3,014)

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Crsdpfeuycgfox Aipjc Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: used, total width: 3,900 mm, total height: 1,800 mm, Colour: Grey Empty weight: 4.200 kg Dimensions (LxBxH): 190 x 390 x 180 cm - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 90-58-07 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - └ Spindle 2: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - └ Spindle 3: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - └ Spindle 4: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - Max. planing width [mm]: 240 - Max. planing height [mm]: 85 - Feed table length [mm]: 1440 - Feed motor [kW]: 5.5 - Diameter extraction nozzle [mm]: 150 - Transport dimensions: 1900mm x 3900mm x 1800mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Csdpfx Aiewnh U Espsrc Yorick Diebels

Condition: excellent (used), functionality: fully functional, operation weight: 7,000 kg, Year of construction: 2008, machine/vehicle number: CRG- 442812008-l, in excellent condition Codeylml Nopfx Aipsrc

Condition: used, mileage: 707,975 km, power: 235 kW (319.51 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 13,700 kg, maximum load weight: 12,550 kg, overall weight: 26,250 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, loading space volume: 54 m³, loading space length: 8,920 mm, loading space width: 2,523 mm, loading space height: 2,436 mm, Equipment: ABS, air conditioning, cabin, cooling unit, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Yourtrucks Group Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price listed in our ads, as this price is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is updated regularly. This information is to be regarded as non-binding general information and does not replace a detailed, individual consultation when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, error, typographical error, and prior sale. Crodpfx Ajy I Abasipjc Only our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, empty load weight: 7,440 kg, maximum load weight: 31,560 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Features: Alloy wheels, 3 axles, BPW axles, air suspension, first axle liftable, last axle steered, raise/lower function, ABS (anti-lock braking system), Edscha sliding roof, curtain sides, doors, coil well, lashing rings, underrun protection, lateral aluminum side guards, support legs, storage box. Superstructure: Krone trailer with sliding curtains on both sides, coil well and Edscha sliding roof, 3x 9t BPW axles, first axle liftable, disc brakes, coil well approx. 8,840 mm long, 10 pairs of heavy-duty lashing rings recessed in the floor, stake pockets 81 x 81 mm in the outer frame, 30 mm thick waterproof flooring, Edscha sliding roof, Multilock outer frame with universal load securing options every 100 mm, steered trailing axle lockable! Clear loading height at rear portal approx. 2,600 mm! Corner dimension approx. 2,040 mm! Unladen fifth wheel height approx. 1,150 mm! Cedpfxowzyq Eo Aipjrc Spare wheel available for an extra charge! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, empty load weight: 5,980 kg, maximum load weight: 33,020 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 85 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Alloy wheels, 3 axles, BPW axles, air suspension, 1st axle liftable, last axle with steering function, raising and lowering, ABS (anti-lock braking system), Edscha sliding roof, curtain sides, doors, coil trough, lashing rings, underrun protection, side aluminum side guard, support legs, storage box. Csdewzyq Sjpfx Aiporc Body: Krone semi-trailer with sliding curtain on left and right, coil trough and Edscha sliding roof. Three 9t BPW axles, 1st axle liftable, disc brakes, coil trough approx. 7236mm long, 10 pairs of heavy-duty lashing rings recessed in the floor, pocket holes 81 x 81 mm in the outer frame, 30mm thick waterproof floor panels, Krone sliding roof, ADR fire-retardant roof tarpaulin, steering rear axle lockable! Clear loading height at rear portal approx. 2525mm! Corner dimension approx. 2040mm! Fifth wheel height unladen approx. 1150mm! Spare wheel available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: good (used), Cooling compressor Credpfx Asyb Rquoipjc Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: excellent (used), functionality: fully functional, empty load weight: 2,660 kg, maximum load weight: 13,340 kg, overall weight: 16,000 kg, Year of construction: 2010, Krone WP LS4-CS/Flatbed with tarp/Swap body • Manufacturer: Krone • Type: WP LS4-CS • Year of manufacture: 01/2010 • Suspension: air-air • Swap body • Length: 7.20 meters • Width: 2.45 meters • Height: 2.50 meters • Unladen weight: 2,660 kg • Payload: 13,340 kg • Gross weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. Crjdpeymn Riofx Aipsc - Sale according to our terms and conditions.

Condition: excellent (used), Year of construction: 2022,

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Crjdpjy H Hmwsfx Aipjc Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A • Heating Amperage: 102 A • Drive Amperage: 79 A • Control Amperage: 67 A • Operation Voltage: 400 V Crsdpsy Icikofx Aipjc • Frequency: 50 Hz • Certification: CE

Condition: used, Year of construction: 2021, Format: 760 x 1.060 mm Equipment: Bogenformat min.: 300 x 350 mm Bogenformat max.: 760 x 1.060 mm Maximum machine speed: 8,000 Bg/h Maximum punching pressure: 2.6 MN / 260 t Materials and stacking height (including pallet) Crsdpfx Aijyx Hvcjpsc Paper min.: 90 g/qm2 Cardboard / solid cardboard max.: 2,000 g/m2 Corrugated cardboard max.: 4.0 mm Height of investor stacks: Without non-stop max.: 1,500 mm Maximum continuous operation: 1,200 mm Maximum weight of stack of feeders: 1,500 kg Without a utility separation station Without MasterSet

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,000 rpm, travel distance X-axis: 48 mm, travel distance Z-axis: 236 mm, spindle motor power: 750 W, total height: 400 mm, overall weight: 85 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 810/840D Turn/Mill control, number of axes: 2, Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum part length: 215 mm Crsdpey H Etcjfx Aipsc • Spindle/Workholding • Spindle connection: factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Through hole in chuck: 15 mm • Automatic chuck diameter: 76 mm • Mechanical speed steps: 2 • Maximum torque: 14 Nm • Tooling • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/Drives/Accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Position scatter X: 0.008 mm • Position scatter Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MK1 • Automatic tailstock quill stroke: 15 mm • Lubrication • Guideways: oil • Other lubrication points: grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % • Frequency: 50/60 Hz • Max fuse: 12 A • Dimensions/Weight/Noise • Axis height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) • Slight corrosion on machine components (common for comparable machines) • 4+4 station tool turret • Tailstock MK1 including quill and center point • 3-jaw chuck installed, no additional jaw sets included • Collets available, but no collet chuck • No drill chuck (MK1) and no drill bits included • Tools available as shown in images • 5.5 mm Allen key included • Siemens Sinumerik 810/840D Turn/Mill control (PC & CD) • License key included, likely transferable • Operating manual and machine documentation included • Data carriers included Technical Specification Driven Tools No Counter Spindle No

Condition: good (used), functionality: fully functional, machine/vehicle number: WKESD000001092168, empty load weight: 7,080 kg, maximum load weight: 31,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,490 mm, loading space volume: 84 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, color: grey, Year of construction: 2022, Equipment: ABS, our vehicle number #30358 Crsdpeyt Ilgsfx Aipjc 3x Krone axles Tire size 385/65 R 22.5 all NEW!!! Perm. total weight 39,000 kg Payload 31,920 kg Unladen weight 7,080 kg Body dimensions (internal): L: 13,620 mm W: 2,480 mm H: 2,490 mm V: 84 m³ Rear portal loading height: 2,400 mm Color: Traffic Grey RAL 7043 Lifting axle Disc brakes Sliding curtain Sliding roof Load securing certificate EN 12642 XL Hydraulic rear extension, 500 mm per side Multilock outer frame 2 lashing rings on rear cross member 5 pairs of heavy-duty lashing rings under outer frame 10 rows of stanchion pockets 81 x 81 mm 2x oversize warning boards each Forklift accessible, 7,000 kg Rear wall 750 mm, foldable Drop chains for rear wall Rear roll tarp Side tarpaulins with 600 mm skirting Stanchion depot on the left Mounting for beacon at rear 2x toolboxes 6 plug-in stanchions Jost landing legs Raise/lower function ABS EBS E-wheel holder 2x LED rear combination lamps Side underrun protection Financing available on request!!!

Condition: used, Year of construction: 1989, With sanding units consisting of: - 1 calibration roller - 1 combination unit with rigid pad Used Manufacturer: SCM Model: UNO C-CS Year of manufacture: 1989 Machine no.: AE005036 REF.: 030514 Sanding width: approx. 920 mm Pass-through height: approx. 3-160 mm Crjdoy H N Taepfx Aipoc Number of units: 2 pcs., 1x15 kW Units from above: 2 pcs Belt dimensions (L x W): 1525 x 930 mm 2x feed speed: 4.5 / 9.0 m/min 1 pc calibration roller - grooved / rubber-coated 1 pc combination unit with rigid sanding pad - rubber-coated roller Extraction connection: D 2 x 160 mm Required space: approx. 1600 x 1500 x 1800 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-is condition as inspected, without warranty or guarantee

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? Cedpfx Asy H H Hqsipjrc For further information or contact options, please use the contact form.

Condition: good (used), functionality: fully functional, Year of construction: 2002, load capacity: 25,000 kg, lifting height: 3,200 mm, Description WEIGHT OF FORKLIFT 31100 KG POWER 100KW MAX LIFTING CAPACITY 25000 KG MAX LIFTING: 3200mm Csdpsvlazaefx Aipsrc CAMERA FOR CLIENT WE CAN ORGANIZE AS WELL SPECIAL TRANSPORT FOR CLIENT Specifications Manufacturer MORA - SPAIN Model M250 CS Year 2002 Condition Used overhauled

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. Crodsy Egz Sopfx Aipoc - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling Cjdpfxewdm U No Aipsrc SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 61300 € 1158.57 € Doppelsäulenführung 6000 x 41 x 1,3 mm 20 - 100 m/min 560 mm 560 mm 600 x 560 mm 810 mm 2.2 kW 5.5 kW 0.12 kW 3250 mm 2200 mm 2350 mm 4500 kg Hydromechanical band tension Continuously variable bandspeed (inverter) Linear guide Feed vice with servo drive with 700 mm stroke or 9.999 mm for multi-stroke Control panel with touchscreen (50 cutting lengths / 30 programs) Planetary gearbox Saw pressure adjustment Band deflection sensor Coolant device Chip brush Optical height adjustment OPTIONEN: Hydraulicupper clamping Micro cooling unit Crjdpfxsynmy Se Aipjc Roller table3 m Laser cutting line

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 50900 € 962.01 € Doppelsäulenführung 5750 x 41 x 1,3 mm 20 - 120 m/min 420 mm 420 mm 420 x 420 mm 805 mm 1.1 kW 5.5 kW 1 kW 0.12 kW 2860 mm 1980 mm 2100 mm 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Codjwiq Dfjpfx Aipsrc Chip conveyor Operating instructions in GERMAN or ENGLISH

Year of construction: 2025, condition: new, functionality: fully functional, table height adjustment: 300 mm, Equipment: USB port, Workshop workstation with adjustable worktop height – Workbench PowerLift and Workbench Standard tables. A solid adjustable table with the possibility of adjusting the worktop height is an ideal solution for demanding users. Adjustable worktop height: mechanical, reliable height change allows you to adjust the work station to individual needs, ensuring ergonomics and work comfort. Cjdpfxjwn Da Ds Aiporc Worktop adjustable in the range of approx.: 760-1130 [mm] The height of the worktop and tool board is adjusted mechanically using the included folding crank or any screwdriver. Solid construction: Made of the highest quality materials, it guarantees stability even with uneven load. Load capacity up to 500 kg: The table is designed for working with heavy tools and materials, ideal for intensive use. Mobility: Extendable wheels allow easy movement of the work station in the workshop, without compromising stability during work. Lighting: Equipped with a professional lamp with adjustable light intensity, adjusted locally using a knob or through the building management system. As standard, the table is equipped with lighting in the Dali system. Electrical panel: standard emergency button, three 230V sockets and a lighting intensity controller, which increases functionality and work safety. An additional fourth socket is located under the table top. Tool board: Perforated board allows convenient organization of tools, helping to maintain order at the workstation. As a renowned manufacturer of workbenches, Karnatech offers a 100% Polish product, characterized by the highest quality of workmanship and attention to detail. PowerLift is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. We also have more budget workstations without the possibility of lifting the worktop in various versions. Workstations designed and manufactured in the EU.

Year of construction: 2002, condition: used, z-travel 200 mm Clamping diameter of the cutter heads max. 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting cone for cutter heads Nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of Crodpfxoy A S U Se Aipjc the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, saw blade diameter: 350 mm, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, cutting length (max.): 3,200 mm, intake manifold diameter: 120 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Saw blade diameter min.: 300 mm Saw blade diameter max.: 350 mm Saw blade bore diameter: 30 mm Dust extraction nozzle diameter: 120 mm Crodsy Ai U Aspfx Aipoc Max. spindle speed: 4,000 rpm (automatically adjustable) MACHINE DETAILS Voltage: 400 V Power consumption: 18.5 A Fuse: 25 A Transport packages: 2

Condition: used, maximum load weight: 6,500 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 04/2010, Equipment: ABS, WIESE Tandem Trailer with Tarpaulin & Drop-Sides | Excellent Condition | EBS/ABS | Air Suspension Well-maintained WIESE tandem trailer with tarpaulin and frame from reputable previous ownership. The vehicle is in tidy, immediately operational condition. Vehicle Data: - First registration: 04/2010 - Perm. total weight: 10,000 kg - Unladen weight: approx. 3,500 kg - Payload: approx. 6,500 kg - Axles: 2 - Brakes: WABCO EBS with ABS - Body: Tarpaulin & frame - Manufacturer: WIESE Fahrzeugbau The trailer stands out due to its robust construction, making it ideal for daily transport in local and regional operations. Features: - Stable tandem chassis - Proven WABCO EBS braking system - Tarpaulin and frame in good condition Codpfxoyn Tuvj Aiperc - Available immediately For any questions, I am always at your disposal.