Used Control Block for sale (49,062)

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Toolholders will come without cutting tools. Fgjdpoz Eiv Tefx Afuoh Technical data are shown on pictures.

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Fjdpfjz Hq Rbsx Afuegh Brand new never used. Please check out our other listings as well.

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L Fgodpfx Ajxwmiksfuoh # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: excellent (used), I am selling an industrial table grinder. Price 550€/ for 1 piece. Fgodpfx Afeud A A Soueh

Condition: excellent (used), I am selling an ABUS 16T hook block. Very good condition. Fgjdpfxov Upb Uo Afueh

Condition: new, For sale: Bernard Controls DEUFRA SQ10 electric valve actuator The device is brand new, unused, from warehouse stock. Ideal for industrial applications, process installations, automation, and valve or damper control. Technical data: Manufacturer: Bernard Controls DEUFRA Model: SQ10 Power supply: 230 V Phase: 1-phase Fodoyu U Azopfx Afujgh Power: 0.02 kW Frequency: 50 Hz Current: 0.5 A Torque: 100 Nm Speed: approx. 0.43 rpm Industrial-grade design Condition: New, unused, warehouse stock No signs of use Fully functional Additional information: The price is for one unit

Condition: new, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Equipment: scorer, Striebig Control18 6224 Cutting range: 6224 L: 5300 x Hvert: 2240 / Hhor: 2100 x D: 80 mm Saw frame - Production of the machine in the precision parts to 1/100 mm - Solid, self-supporting, firmly welded, torsion-resistant saw frame - TRK1 full-surface support wall made of birch plywood with integrated small parts support - Auxiliary fence profile with its own measuring tape and 3 auxiliary fences for repeat cuts - Automatic detection of the center support - Automatic roller blocking during the saw cut Saw beam - Sturdy, durable steel saw beam construction - Automatic saw beam locking with interface detection Saw unit - Backlash-free, smooth-running guides - Robust bearing of the motor carriage ensures high cutting precision - Powerful, high-torque 5.5 kW motor (7.5 hp) - More convenience thanks to largely automated operation - Laser-supported display of the horizontal cut - Automatic motorized carriage clamping - Automatic plunging and tilting of the saw motor - Pneumatic clutch for easy changeover to manual operation - SUPERSILENT sound insulation to reduce saw blade noise - Electromagnetic motor brake - ProLock Easy-Fix tool clamping system Control system - 12" touchscreen computer with optimum operator guidance - Multilingual operator guidance - Tool database guarantees high flexibility and absolute repeat accuracy - Fully automatic sawing sequence - Infinitely variable feed speeds 10-25 m/min - Selectable sawing cycle - End of panel detection - Constant return speed - Operating hours counter - Network connection - UPS 24VDC for touch PC (uninterruptible power supply) - Automatic saw beam positioning ASP Ground adjustment - Digital measuring system DMS.x (horizontal axis for vertical cuts) - Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, ergonomics - STRIEBIG typical product design - Multiple awards (including the Swiss Design Award) - Functional and user-friendly ergonomics Mounting Fgedsu Nhbyjpfx Afush - Wall or free-standing installation possible - VSA scoring saw unit (infinitely adjustable scoring saw) - Paper holder - Small parts support, aluminum compl. (2-part) - Striebig cutting optimization STRIEBIG ExpertCut CON

Year of construction: 2010, condition: ready for operation (used), Side table with air Fgsdpfsz Aah Rex Afuoh Chrome table Data numeric control is installed 2008 from Perfecta and completely overhauled Available immediately 3 knives

Condition: used, functionality: fully functional, mileage: 421,196 km, power: 346 kW (470.43 HP), first registration: 04/2023, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GM. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e. Gearbox MAN TipMatic 12.26 DD. MAN EfficientRoll gearbox function. Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Road speed limiter, adjustable, limiter (engine speed regulation). Technology MMT infotainment system, Advanced Basic. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Fgedsz E U Ihopfx Afujh Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 12 mm Front right - 13 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1045, We are offering a Kallfass block saw for sale. It was in operation until recently and has now been dismantled a few weeks ago. Fgjdpfx Asz A Tp Sjfuoh Please refer to the pictures for details on its condition, etc. If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Sanyo Denki AC servo motor with F681024F06 / 09907 optical shaft encoder – presumed motor model: 20BM121FXPR1, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgodpfxjz Ddtqs Afueh

Condition: ready for operation (used), SEW RF73 DT90L-12-2BM/Z gearbox motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, hole spacing of mounting holes: 150 x 150 mm, diameter of output shaft: 40 mm. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fgjdpfx Afsz Dnwysush

Condition: ready for operation (used), KUKA 1FK7103-5AF81-1YY3-Z S17 servo motor, serial number: YFV950655147009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgedpoz Dnwaofx Afush

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 15 kW (20.39 HP), total height: 2,300 mm, total length: 1,500 mm, total width: 900 mm, overall weight: 1,500 kg, table height: 955 mm, Equipment: CE marking, documentation/manual, motor brake, Vertical band saw / resaw Manufacturer: Stenner Type: ST 9 Heavy-duty vertical band saw for resawing and trimming of squared timber, planks, and boards Typical applications: sawmill, timber trade, carpentry, pallet manufacturing, planing mill Saw blade and rollers: Diameter of saw blade rollers: 915 mm Saw blade width: 100 mm Minimum saw blade length: 5280 mm Maximum saw blade length: 5380 mm Fgodpfxjz Eigfj Afuoh Cutting performance: Maximum wood width: 370 mm Maximum cutting width (standard): 230 mm Maximum distance from saw line to fence: 305 mm Fence swivels 0 – 35° Drive and feed: Motor: 15 kW (optional equipment) Feed rate: variable, 7.5 – 30 m/min Dust extraction: Dust extraction port diameter: 150 mm Extraction volume: 1455 m³/h Dimensions and weight: Working height: 955 mm Dimensions (approx.): 1500 x 900 x 2300 mm (L x W x H) Machine weight (approx.): 1500 kg Basic concept: - Vertical band saw for resawing and trimming of solid wood - Fence swivels 0 – 35° for bevel and wedge cuts - Feed rate can be adjusted variably from 7.5 to 30 m/min - Saw blade rollers 915 mm, saw blade width up to 100 mm - Wood type: softwood / hardwood

Condition: used, MFC – Digitally controlled gas mass flow controller, mass flow controller Fjdoz Ek Svopfx Afuegh Elastomer-sealed mass flow controller, flow regulation, flow meter, flow controller, valve MKS Type GE250A-34328 Serial No. STD Model No. GE250A013255T6V3020 STD Serial No. Year of manufacture 2019 (New / unused in original packaging) Power connection +24VDC (M8 connector, 5-pin, male) Power consumption

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (max.): 4,000 rpm, Control system: Siemens 828 D Drive spindle Speed: 4,000 rpm Power: 9 kW Maximum torque: 110 Nm Chuck diameter: 210 mm Spindle bore: 53 mm Spindle nose: A2-5'' Working area Distance between centers: 1,000 mm Center height: 240 mm Swing over bed: 470 mm Swing over compound slide: 200 mm Swing over cross slide: 430 mm Z-axis travel: 1,065 mm X-axis travel: 220 mm Tool system Fodpfx Aozrghvofujgh Turret: PARAT 4-position turret head RD 2 Tailstock Technology: Follow-type Centering point: MK-4 (rotating) Steady rest Technology: Traveling Diameter range: 12 mm - 50 mm Equipment Chip management: Chip tray Coolant supply: Coolant pump, 7 bar Additional feature: Adapter plate PARAT RD-2 with internal cooling Chuck: SMW wedge-type chuck (D = 210 mm) Jaw set: 1 set of hardened jaws Footprint (L x W): 2.91 m x 1.24 m

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) Fsdpfxjuzn Nne Afujgh - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: ready for operation (used), KUKA 1FK7100-5AZ91-1ZZ9-Z S05 servomotor, serial number: YFW250673501009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fodpfxjz Dzt Ij Afusgh

Condition: ready for operation (used), KUKA rotor for 1FK7100-5AZ91-1ZZ9-Z S05 servo motor, serial number: YFVN50667032021, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fjdpfxjz Dzurs Afujgh

Condition: ready for operation (used), KUKA KS2FE-007 AC servo motor SN: 94-IF-231 - IP64,used, good condition, 100% working, scope of delivery as per photos Fgedpfx Afotz Ictouoh

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe Fgsdpfxsw E Nkis Afuoh -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: ready for operation (used), Year of construction: 2017, Wittmann MTC Primus-C90 F27 Temperature Control Unit, Single-Circuit Only one unit is available. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Fjdpfx Aeyw Rfxefuegh Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFV950655173025, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgodjz Dnv Nepfx Afujh

Condition: excellent (used), B&R 4PP220.0571-65 HMI/PLC for sale. It was used for tests only. Never made it's way to the machine. Sitting in a storage sor couple of years. Fgedpfx Afey N Nmxjush

Condition: new, 0 2750 mm Fodpfx Afexmk D Rsusgh Working height 2500 mm