Used Dc 10/60 for sale (46,583)

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Kdodpsx D Abpsfx Agpjl Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.H. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW Kdsdovb Hanjpfx Agpel - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread Ksdpfx Aevb E Uqogpodl - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Kdsdot D Nz Aepfx Agpjl Hydraulic Section Shear - Combined

Condition: used, Year of construction: 2016, saw blade diameter 360 mm Kdsdpfxsv Nq Rms Agpel cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Input power: 220/380/440V/3/50/60 Kodpeu Afwlefx Agpjdl Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Kdjdpfx Aou Afttsgpsl Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: used, mileage: 213,949 km, power: 265 kW (360.30 HP), first registration: 10/2011, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 3,600 mm, color: yellow, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: electric window regulation, Transmission: ZF 16S-222 OD, 16 gears, Manual gearbox Applicable material: Concrete Axle 1: Tyre size: 315/80R22,5; Suspension: leaf suspension Axle 2: Tyre size: 315/80R22,5; Double wheels; Steering; Suspension: air suspension Drive: Wheel Number of cylinders: 6 GVW: 32.000 kg Engine type: MAN D2066 LF42 Kdodpfx Agjvw R Nxspol = Additional options and accessories = - Central lubrication - PTO

Condition: used, Year of construction: 1998, machine/vehicle number: SV03, Used Automatic Decapper Krones 10 heads year 1998Technical Specifications & Performance DataThe Used Automatic Decapper Krones 10 heads, model 360-10-113, stands as an exceptional choice for your industrial packaging needs. Built in 1998, this robust decapping machine is designed to efficiently handle high-speed bottling lines. With a production speed of 20,000 bottles per hour, it meets the demands of large-scale beverage production. Specifically designed for glass containers, it offers precision and reliability for processing various bottled products including water, juice, beer, and wine.Number of Heads: 10Electrical Requirements: 400V, 50Hz, 8.25ACondition: In StorageManuals: AvailableAdvanced Automation & Control SystemsAt the heart of this used bottling line machine is an advanced control system that ensures precise operation. The automation level is designed to streamline production processes, allowing for seamless transitions between different beverage types. The machine’s control panel features user-friendly interfaces, making it simple to operate while maintaining high safety and efficiency standards. Safety features integrated within the machine ensure that it complies with modern production safety protocols. This decapper operates on 400V with an electrical current of 8.25A, ensuring powerful and efficient operation.Production Line Integration CapabilitiesThe Krones decapping machine seamlessly integrates with other industrial packaging systems, making it a versatile component of any production line. Its capability to handle format changes efficiently makes it compatible with other equipment such as filling, labeling, and capping machines. The machine is engineered to support multi-product flexibility, accommodating a variety of beverage types and container shapes with ease.Machine Condition & Maintenance HistoryCurrently in storage, the Krones decapper is primed for redeployment. Although used, it remains in excellent condition, backed by a comprehensive maintenance history that attests to its reliable performance. Routine maintenance has kept the machine in optimal working order, ensuring longevity and operational efficiency upon return to active duty.Operational Performance & VersatilityThe machine excels in operational performance, offering versatility that meets multiple production needs. It is compatible with a variety of product types, making it ideal for companies that handle diverse beverage manufacturing processes. Its ability to adapt to different container materials, particularly glass, allows for flexibility and ease in switching between product lines, ensuring uninterrupted production.Installation Requirements & Site PreparationProper installation and site preparation are crucial for maximizing the performance of the Krones decapping machine. The unit requires a designated space that accommodates its operation and allows for safe and accessible maintenance. Additionally, utility connections must meet the specified electrical requirements of 400V and 50Hz to ensure optimal functionality.Safety Standards & Compliance CertificationSafety is paramount in industrial packaging operations... Kdedpfsvgu D Esx Agpel

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster Kedpfjx Imqlsx Agpedl • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: refurbished (used), functionality: fully functional, load capacity: 60 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Kdedpfx Agorqgduepsl Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7500kg Ksdpfx Aov Smm Negpedl Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Year of construction: 2015, condition: excellent (used), The device is for sale: Kdjdpfx Agjncdwyjpsl They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Kjdpfx Ajxzynuegpodl

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € 125.45 € 60 to Kjdpfoypbwhex Agpjdl fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7300 € 140.89 € 60 to horizontal verschiebbar 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg Kodpoypbwbefx Agpodl horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, Transformer 220 V mono to 380 V tri Power converter: 10 kW Kdjdpfx Agsyk E Hvopjl New, never used Dimensions (L x W x H): 800 x 600 x 500 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Kodpfxox E U Elo Agpodl Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Transport and loading can be organised on request, at an additional cost, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2005, operating hours: 63,000 h, functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2005 Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Kdedpfx Agou Hqh Repjl Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Kdjdpox Itamofx Agpol Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Year of construction: 2003, condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Kdedpslwxpisfx Agpel Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Kdedpfx Ajt E Sfgegpel Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Kodpfx Aot R Tq Isgpjdl

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Kodpfxevuafko Agpedl

Condition: used, functionality: fully functional, empty load weight: 1,538 kg, maximum load weight: 1,962 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,000 mm, loading space width: 2,350 mm, loading space height: 2,190 mm, Year of construction: 2024, * IMMEDIATELY AVAILABLE * Used 2024 car transporter in nearly new condition. Kodoydilpopfx Agpedl EXTRA HIGH VERSION WITH 219CM INTERNAL HEIGHT As new! - Current new price = €57,036 Many extras included: - Additional ramps - Flashing position lights - Floor-integrated lashing points (tanks) - Solar panel mounted on the roof - Reversing camera - Wheel shock absorbers Technical data: • Brand: Brian James • Model: Race Transporter 7 • Vehicle type: Car transporter • Vehicle condition: Used vehicle • First registration: 11/2024 • TÜV/HU: New at delivery • Interior dimensions (LxWxH): 600 x 235 x 219 cm • Exterior dimensions (LxWxH): 770 x 255 x 286 cm • Loading floor height: 58 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,538 kg • Payload: 1,962 kg • Chassis: Platform trailer (wheels beneath superstructure) • Tyres: 195/55R10C • Suspension: AL-KO rubber torsion axle • Jockey wheel: Yes • 100km/h approval: Optional, retrofittable DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Lightweight yet extremely strong • Full-length daylight roof • Manoeuvring handles front and rear • Dual front access doors on both sides, making wheel lashing easier • Large double side doors on left and right (in direction of travel), lockable • Electric rear ramp in full height and width • Rollers at rear of the vehicle • Interior height 219cm – rear entry height 208cm • Perforated lashing floor offers high slip resistance and is extremely wear-resistant, even in the toughest conditions • Numerous lashing points and a highly reinforced floor offer flexible lashing options and perfect grip • Fully adjustable wheel stops with quick-adjust system, suitable for lowered vehicles • Closed composite (honeycomb plastic) floor plate • 2 central floor storage boxes integrated into the loading area • Electric 12V winch with wireless remote, synthetic rope and carabiner • Electro-hydraulic tilting function, tip loading platform at the push of a button for optimal ramp angle • Central control unit for tilt and rear ramp, in addition to wireless remote • Extremely robust welded steel frame • Frame fully hot-dip galvanized • Spare wheel with mount installed • Reinforced, very robust V-drawbar • AL-KO overrun brake and parking brake • Automatic reverse function • Coupling head with integrated high-security AL-KO lock • 13-pin plug • LED interior lighting with LED strip • Reversing lights • Large, full-LED safety lighting • Side LED reversing lights • Rear LED work light for better visibility during loading/unloading • Integrated rear fog light • Various marker lights: front, side and rear • Anthracite alloy wheels • Heavy-duty jockey wheel • 5-year chassis warranty • 4 wheel lashing straps for over-the-wheel tie-down • Additional 1.5m aluminium ramps for very low vehicles • 20W/12V solar panel for battery charging • Flashing position lights • Shock absorbers on axles Financing options available on request!