Used Dividing Apparatus for sale (1,299)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump Nwjdpfx Aoxk T Efsi Tsn • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: new, Lightweight roller conveyors 540 mm, 500 mm, straight, 3 m, steel rollers, 100 mm · For transporting individual items by gravity (incline). Slope approximately 2 - 5 %, depending on the nature and weight of the conveyed goods. · The base of the conveyed goods may have longitudinal stringers or circumferential ring strips, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed goods can also be transported. · Different intermediate lengths are available on request. · The conveyed goods should rest on at least 3 support rollers. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. · Curves: inner radius 800 mm, support rollers, depending on the conveyor width, either continuous or divided into several sections. · ¹ Note: for a spacing of 75 mm, the following will be supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: overall width: 540 mm Nodpfx Ae Abvifoi Tjwn Design: with steel rollers, galvanized Spacing (axle distance): 100 mm Size: Straight, 3 m Conveyor width: 500 mm Overall width: 540 mm

Condition: new, Light roller conveyors, 540 mm, 500 mm, straight, 2 m, corner roller, 100 mm · For transporting individual items by gravity (incline) at an angle of approximately 2-5%, depending on the nature and weight of the conveyed material. · The base of the conveyed material can have longitudinal supports or continuous circular rails, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Different intermediate lengths are available on request. · The conveyed material should rest on at least 3 support rollers. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). · Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe available on request. · Curves: Internal radius 800 mm, support rollers are continuous or divided into multiple sections depending on the track width. · ¹Note: with a spacing of 75 mm, the following will be delivered: instead of a length of 1000 mm, a length of 975 mm will be delivered; instead of a length of 2000 mm, a length of 1950 mm will be delivered. · Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. · Other technical characteristics: Overall width: 540 mm. Track width: 500 mm Size: Straight, 2 m Design: With plastic rollers Overall width: 540 mm Nwodo Abvirjpfx Ai Ton Spacing (axle distance): 100 mm

Condition: new, Light roller conveyors, 640 mm, 600 mm, straight, 3 m, steel rollers, 75¹ mm * For transporting individual items by gravity (incline) with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material. * The bottom of the conveyed material may have longitudinal supports or circumferential ring strips, provided that these rest on the rollers. * Since the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available upon request. * The conveyed material should rest on at least 3 support rollers. * This results in the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). Nodpfx Ae Abvkcei Town * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available upon request. * Curves: Internal radius 800 mm, support rollers are either continuous or divided into multiple sections, depending on the track width. * ¹ Note: With a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 640 mm Overall width: 640 mm Pitch (axle distance): 75¹ mm Design: with steel rollers, galvanized Size: Straight, 3 m Track width: 600 mm

Condition: new, Light roller conveyors, 640 mm, 600 mm, straight, 3 m, steel rollers, 100 mm · For transporting individual items by gravity (slope), inclination approx. 2 - 5 %, depending on the nature and weight of the conveyed goods · The bottom of the conveyed goods can have longitudinal supports or continuous circular profiles, provided they rest on the rollers · Since the support rollers protrude, oversized conveyed goods can also be transported · Different intermediate lengths are available at any time · The conveyed goods should rest on at least 3 support rollers · This results in the required pitch = axle distance · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request) · Support rollers: plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available on request · Curves: inner radius 800 mm, support rollers continuously or multiply divided, depending on the conveyor width · ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of 1000 mm – 975 mm, instead of 2000 mm – 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm · Other technical specifications: overall width: 640 mm Njdpfx Aij Abvmds Town Pitch (axle distance): 100 mm Design: with steel rollers, galvanized Conveyor width: 600 mm Overall width: 640 mm Size: Straight, 3 m

Condition: new, Light roller conveyors, 340mm, 300mm, straight, 1m, curved roller, 100mm * For transporting individual items by gravity (incline), with a slope of approximately 2-5%, depending on the nature and weight of the conveyed goods. * The base of the conveyed goods can have longitudinal supports or circumferential ring strips, provided they rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. Nwedpfxs Abvbhj Ai Ten * Alternative intermediate lengths are available upon request. * The conveyed goods should rest on at least 3 support rollers. * This determines the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). * Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available upon request. * Curves: inner radius 800 mm, support rollers are either continuous or divided into multiple sections, depending on the conveyor width. * ¹Note: with a pitch of 75 mm, the following lengths are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied, instead of a length of 2000 mm, a length of 1950 mm is supplied. * Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Further technical specifications: overall width: 340mm Size: Straight, 1 m Design: with plastic rollers Pitch (axle distance): 100 mm Conveyor width: 300 mm Overall width: 340 mm

Condition: new, Lightweight roller conveyors, 440mm, 400mm, straight, 1m, steel rollers, 75¹mm · For transporting individual items by gravity (inclined), with an inclination of approx. 2 - 5 %, depending on the nature and weight of the conveyed goods · The base of the conveyed goods can have longitudinal supports or circumferential ring strips, provided they rest on the rollers · As the support rollers protrude, oversized conveyed goods can also be transported · Alternative intermediate lengths are available on request · The conveyed goods should rest on at least 3 support rollers · This results in the required spacing = axle distance · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request) · Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available on request · Curves: Inner radius 800 mm, support rollers, depending on the conveyor width, either continuous or divided into multiple sections Nodo Abvb Uspfx Ai Tewn · ¹ Note: with a spacing of 75 mm, the following are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm · Other technical features: Overall width: 440mm Size: Straight, 1 m Overall width: 440 mm Conveyor width: 400 mm Spacing (axle distance): 75¹ mm Design: with steel rollers, galvanized

Condition: new, Lightweight roller conveyors, 440 mm, 400 mm, 90-degree curve, steel rollers, 75¹ mm * For transporting individual items by gravity (incline). Inclination approximately 2-5%, depending on the nature and weight of the conveyed goods. Nodpfxo Abvcro Ai Tjwn * The base of the conveyed goods may have longitudinal ribs or circumferential ring strips, provided they rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths are available on request. * The conveyed goods should rest on at least 3 support rollers. * This results in the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted; steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel pipe available on request. * Curves: Inner radius 800 mm. Support rollers are continuous or divided into multiple sections, depending on the conveyor width. * ¹ Note: with a spacing of 75 mm, the following are supplied: instead of a length of 1000 mm - a length of 975, instead of a length of 2000 mm - a length of 1950. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. * Other technical characteristics: Overall width: 440 mm Spacing (axle distance): 75¹ mm Size: 90° curve Design: with steel rollers, galvanized Overall width: 440 mm Conveyor width: 400 mm

Condition: new, Toolbox Basic B465xT410xH200mm, 27l, KNIPEX * Durable design made of ABS material, black * All-around aluminum frame * 3-digit combination lock and 2 flip locks to secure the lid * Sturdy, ergonomic carrying handle * Metal hinges Nwedpfx Aj Abzg Aoi Ton * Lid holder with hinge mechanism * Document compartment in the lid * Removable tool panel in the lid with 9 tool pockets and an elastic loop on the lid side, and 10 narrow and one large tool pocket on the bottom side * Bottom tray, height 55 mm, can be further divided by inserts, and cover panel with 12 large tool pockets and one flat compartment * Can be secured with a push button * Load capacity 15 kg External width: 465 mm Internal depth: 350 mm Load capacity: 15 kg External depth: 410 mm Internal height: 180 mm Internal width: 440 mm External height: 200 mm

Condition: new, Drawing cabinet, light grey/light grey, H420 x W1100 x D765 mm, 5 drawers · For flat storage · For the safe and organized storage of, for example, drawings up to DIN A1 or DIN A0 format · The drawers can be divided using partition inserts Nwjdpfx Aij Acf Tio Ton Width: 1100 mm Body: light grey, RAL7035 Height: 420 mm Number of drawers: 5 For formats: DIN A1 Color: light grey/light grey Drawers: light grey, RAL7035 Depth: 765 mm

Condition: new, - For splinter-free, fine cuts in wood or plastic-coated panels, especially in panel dividing saws and table saws. Cut width: 3.2/2.2 mm Teeth: 60 Diameter: 303 mm Nodo Ab H D Hjpfx Ai Tjwn Bore: 30 mm

Condition: new, Mobile presentation board Trio, 2850x1150mm, textile cover/magnetically receptive, royal blue/white · Can be used for presentations and as a room divider · Steel tube frame and frame powder-coated in white · With angled feet and 4 lockable swivel casters · Side panels with Design: mobile Width: 2850 mm Surface: textile cover/magnetically receptive Presentation surface height: 1150 mm Depth: 500 mm Presentation surface width: 2850 mm Color: royal blue/white Nodpfe Acbmfsx Ai Tswn Overall height: 1800 mm

Condition: new, Universal gripper, model Trgf.750kg, gripping range 0-100 mm, with round link chain · with single-acting opener · the large gripping range enables its use for a wide variety of transport tasks in steel construction and apparatus engineering · even when the pull cable is relieved, the spring maintains its grip Height: 264 mm Nwodo Ackf Depfx Ai Ten Gripping range: 0-100 mm Load capacity: 750 kg Jaw width: 100 mm Width: 259 mm Weight: 8.6 kg Design: with round link chain

Condition: new, Universal grab Trgf.1250kg, grab width 90-200mm with round link chain · with single-jaw opener · the large grab width allows for use in a wide variety of transport applications in the steel and apparatus construction industries · even when the pulling device is unloaded, the F remains stable Weight: 24.3 kg Width: 434 mm Design: with round link chain Height: 382 mm Grab width: 90-200 mm Load capacity: 1250 kg Jaw width: 200 mm Nedpfe Ackghsx Ai Tswn

Condition: new, Universal gripper, model Trgf.2000kg, gripping range 0-100 mm with round link chain · with single-jaw opening mechanism · the large gripping range enables its use for a wide variety of transport tasks in steel construction and apparatus engineering Njdpfs Ackgnox Ai Town · even when the lifting device is unloaded, the gripper retains its Gripping range: 0-100 mm Load capacity: 2000 kg Width: 415 mm Weight: 20.8 kg Design: with round link chain Height: 328 mm Jaw opening: 100 mm

Condition: new, Drawing cabinet, light gray/light gray, H760 x W1350 x D960 mm, 10 drawers · for flat storage · for the safe and organized storage of drawings, e.g., up to DIN A1 or DIN A0 format · the drawers can be divided into different sections using dividers Depth: 960 mm Nsdpe Acf Uyofx Ai Tjwn Height: 760 mm Width: 1350 mm Number of drawers: 10 Color: light gray/light gray for formats: DIN A0

Condition: new, Storage bin, L600 x W117 x H90 mm, blue, PP * Made of high-quality, shatterproof, and dimensionally stable polypropylene * Highly resistant to most greases, oils, alkalis, and acids Nwjdpfx Aio Ab Unte Tsn * Safe stacking thanks to stacking feet and all-round stacking rim * High Material: PP Bin size: 10 Length: 600 mm Maximum number of longitudinal/transverse dividers: -/10 Height: 90 mm Color: blue Width: 117 mm

Condition: new, Tool/side cabinet H1800xW1000xD500mm, 8 drawers, 6 shelves, light gray, gentian blue · with center divider · steel sheet construction with durable powder coating · equipped with drawers and pull-out, galvanized shelves Height: 1800 mm Design: 8 drawers, 6 shelves Load capacity per shelf: 35 kg Depth: 500 mm Width: 1000 mm Body: light gray, RAL 7035 Material: steel sheet Load capacity per drawer: 35 kg Doors: gentian blue, RAL 5010 Nwedpfx As Acy Rpji Tjn

Condition: new, Tool/side cabinet H1000xW1000xD500mm, 9 drawers, 2 shelves, light gray, gentian blue · with center divider Nwjdpfx As Acy R Nji Ton · steel sheet construction with durable powder coating · equipped with drawers and pull-out, galvanized shelves Design: 9 drawers, 2 shelves Doors: gentian blue, RAL 5010 Width: 1000 mm Load capacity per shelf: 35 kg Material: steel sheet Depth: 500 mm Load capacity per drawer: 35 kg Height: 1000 mm Body: light gray, RAL 7035

Condition: new, Prefabricated frame · Surface galvanized · Available as a basic and extension shelf · 3 shelf levels · Shelves adjustable in height in a 25 mm grid · 4 shelf divider rods (front and rear) with foam rubber coating each · Load capacity 100 kg per level · Safe storage of traffic signs up to a diameter of 750 mm Further technical features: · Subject to mandatory testing: yes Safety note: Shelves with a height/depth ratio greater than 5:1 must be secured against tipping in accordance with DGUV Rule 108-007 by means of suitable wall, floor, or ceiling fixings. Nwjds Ac Dgnepfx Ai Tjn Load capacity: 100 kg Surface: galvanized Equipment: 4 shelf divider rods Width: 1000 mm Height: 2000 mm Depth: 400 mm Design: Basic shelf

Condition: new, Small parts magazine B357xT255xH435mm, steel sheet, 6 drawers, polypropylene, anthracite, RAACO · Compatible with the rotating tower, item no. 4000 871 607 · Made of steel sheet · Dark blue/transparent · Drawers made of shatterproof polypropylene · With pull-out lock and suspension device; the drawers of the magazine can be divided if desired, using a separate divider set – not included in the scope of delivery Nsdpfo Ab Hbxex Ai Tjwn · Please order separately; for quick identification of the contents, the drawers can be labeled using special labels · Please order labels separately – not included in the scope of delivery. Delivery without contents and labels. · Further technical specifications, see Fig. 1 Color: anthracite Details: 6 pcs. - 240 x 320 x 57 mm Number of drawers: 6 For drawer type: E Material: steel sheet Width: 357 mm Height: 435 mm Depth: 255 mm

Condition: new, Small parts storage unit B357xT255xH435mm, steel sheet, 24 drawers, polypropylene, anthracite, RAACO * Suitable for rotating tower, article number 4000 871 607 * Made of steel sheet * Dark blue/transparent * Drawers made of shatterproof polypropylene Njdpfo Ab Hb Sjx Ai Tjwn * With pull-out lock and suspension device; by purchasing corresponding dividers, all drawers of the storage unit can be divided multiple times, max. into 4 compartments. For quick identification of the contents, the drawers can be labeled with special labels. * Please order labels separately – they are not included in the scope of delivery. * Delivery without contents and labels. * Further technical features, see Fig. 3 For drawer type: G Color: anthracite Number of drawers: 24 Material: steel sheet Width: 357 mm Height: 435 mm Depth: 255 mm Detail: 24 pieces - 239 x 80 x 58 mm

Condition: new, Tool bag B230xW140xH300mm, 10 liters, cowhide, PARAT · Made of cowhide with a center divider, the center divider is made of extra-thick cowhide, black, Con-Pearl® · Side walls made of polypropylene · Front, back, and center divider with a total of 17 pockets · Transparent clip compartment in the lid · Bottom glides · Adjustable carrying strap Nedpfx Aie Ab Hcij Town · 1-way magnetic closure · Bag body reinforced with aluminum angles. Special product advantages: · The height of 300 mm allows this bag to also accommodate a hammer or extra-long screwdrivers. · The lock, which can be operated with one hand thanks to its practical rotary function, closes automatically with a magnetic closure. · Other technical features: Width: 230mm · Depth: 140mm · Height: 300mm Internal depth: 140 mm Internal height: 300 mm Internal width: 230 mm

Condition: new, Tool bag B415xT165xH275mm, 18 l, cowhide, PARAT · Made of cowhide · With center divider · Front panel can be folded open · With 4 compartments · 1 pocket for small parts · 1 clip compartment · Bottom tray made of galvanized steel sheet · Clip compartment · Fixed center divider with flexible CP-7 attachment system (allows for individual arrangement of tools up to 15 mm in diameter) · Back panel with flexible CP-7 attachment system (allows for individual arrangement of tools up to 26 mm in diameter) · 2 lockable latch closures · Other technical features: Width: 415 mm Nwsdpe Ab Hc Nsfx Ai Tsn · Depth: 165 mm · Height: 275 mm Internal width: 415 mm Material: Cowhide Internal depth: 165 mm Internal height: 275 mm

Condition: new, Shelf container, L500 x W160 x H100/112 mm, blue, PS, LA-KA-PE · Made of high-impact polystyrene · Ideal for storing small parts in shelving systems · With end-face handle and integrated pull-out stop Njdpfx Ae Ab T Sksi Tewn · Versatile use thanks to repositionable dividers (optional) Color: blue Height: 100/112 mm Length: 500 mm Model designation: MB 500-160 Width: 160 mm Material: PS