Used Donau Db 25 for sale (16,344)

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats Lredpfx Aksvcudksujl * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. Lodpsyt H R Ujfx Akujrl A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Ledpfx Aex Hgkvskuorl Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,098 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery manufacturer: Baden Batterie, remaining battery capacity: 70 %, battery voltage: 80 V, fork length: 1,010 mm, color: red, Equipment: UVV, lighting, sideshift, Description & special equipment: Incl. charger, good tyres, very good battery with 70% capacity, sideshift, half-cab (ideal for outdoor use), front windscreen, work lights, 3 valves. Lredoyzy Ecspfx Akuel Remark: The forklift is in very good condition. The machine is currently located at our site in Bad Krozingen. For an additional charge, transportation of the machine to your location can be arranged. An invoice with VAT shown will be sent to the buyer and the stated prices are net.

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts Lrsdpoyxw Ddofx Akuel - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, KTP400F Mobile Simatic HMI Lrjdjyvp E Uepfx Akuol -Type: 6AV21252DB230AX0 6AV2 125-2DB23-0AX0 -Number: 3x panels available -Price: per piece -Transport dimensions: Ø 250 x 140 mm -Weight: 1.7 kg/pc.

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, KTP400F Mobile Simatic HMI Lredoxvaqfopfx Akusl -Type: 6AV21252DB230AX0 6AV2 125-2DB23-0AX0 -Quantity: 1x panel available -Dimensions: 200/170/H90 mm -Weight: 0.7 kg

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Ljdpfeyucahjx Akuerl Available immediately from stock.

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device Lodpfjyuqmisx Akuerl • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine Lsdpfxeyrtkxe Akuerl For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Manufacturer: Donau Model: DR23 Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine Lrjdpfx Aegq Nqbskuel SAME /Bogacki - 2515 BA 2D -demonstration machine - travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 incl. stainless steel working table ( 2.700 x 1.700 mm) incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Lrodpfxoynt Ucs Akuel Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices Lrsdeylpzyopfx Akujl - change wheels - Clamping devices - Documentation

Condition: new, empty load weight: 270 kg, maximum load weight: 1,030 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 400 mm, loading space volume: 1.3 m³, color: silver, construction height: 970 mm, working width: 1,850 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanized, Unbraked, Folding front wall, Off-road tyres, Railing, Aluminium drop sides, * IMMEDIATELY AVAILABLE * Incl. folding front wall, off-road tires, railing, aluminium drop sides TECHNICAL DATA - Make: Humbaur - Model: HA 132513 KV Offroad - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 251 x 131 x 40 cm - External dimensions (L x W x H): 379 x 185 x 97 cm - Loading height of floor: 55 cm - Perm. Total weight: 1,300 kg - Unladen weight: 270 kg - Payload: 1,030 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brakes: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: double-walled anodized aluminium - Drop side height: 40 cm - Drop sides foldable: front + rear - Removable drop sides: Rear dropside - Dropside hinges: 2 at rear, riveted - Locks: Long lever locks, internal - Railing: Yes - Can be stored on edge : No - Number of pallet spaces: 3 - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: ALKO - Frame/chassis: Steel side member, bolted - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, U-profile - Drawbar length: 120 cm - Folding drawbar: No - Mudguards: Plastic mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Lashing eyes: 6 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION - Anodized double-walled aluminium drop sides - Screen-printed wooden floor, continuous without joint, slip-resistant and waterproof - Rear drop side foldable - Front drop side foldable - Long lever locks flush with drop side - Continuous side members - Frame compl. hot-dip galvanized - V-drawbar - plastic mudguards - insertion option at all 4 corners for tarpaulin frames, lattice attachment, dropside attachments or front wall elevation - 6 lashing brackets inside the side edge (certified 400kg/dAN) - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - parking brake - parking brake - parking brake. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel with clampAccessories can be retrofitted - please enquire: - Rear supports - High front grille - High tarpaulin - Side wall attachment - Corrugated grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - Slot-hole rails for tension belts & locking beams - Rod strip with rubber coating for tension belts & locking beams - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Lrodpfx Akju Htw Ujujl

Condition: ready for operation (used), Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment. Ljdpoykut Sjfx Akujrl

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Lredpfoylnpiox Akusl Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: like new (used), 25 linear meters Pallet Racking Nedcon Lrjdpfx Akjfi U Aijuel Brand new, see pictures! A top-quality racking system from the major manufacturer NEDCON—subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity: 3050 kg per level Negotiable price: €3,290,-- net ex stock Offer includes: + 10 pre-assembled frames, depth 110 cm, height 3.5 m + 36 beams, length 2.7 m, 3050 kg load capacity per level + 72 safety clips + 20 concrete anchors Load capacity signs, documents, etc. are of course included. You can find additional accessories in the accessories catalogue. Frames in blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load capacity 12 tons, higher bay loads available on request. Beams in orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods available from stock. Transport and assembly available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking systems from various manufacturers in stock. (Specifications, details, and prices as well as prior sale subject to change and errors excepted! Please refer to our Terms and Conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are constantly looking for or offering a wide range of items from various sectors: - broom-clean business clearances - Company liquidations - Fast - flexible - efficient! We also clear out or dispose of goods for insolvency administrators. Write to us with a few details and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: ZFM300H 76 2301, RACK MILLING MACHINE Lodpfx Aeykpl Nekusrl

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Lrsdpfx Akjwal Hpouol Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Year of construction: 2010, condition: ready for operation (used), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Lrjdpju N Hdajfx Akuel

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized Lrsdpjwa Npzjfx Akuel For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 Ledpfx Aksyhdvkjuorl • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device Ljdpfsu Aa I Sex Akujrl - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Lsdpfju Dg D Ajx Akuerl Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Lrjdormkfnjpfx Akuel Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB