Used Dough Dividing And Rounding Machine With Moulding Station for sale (72,401)

Year of construction: 2021, condition: used, Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible. Dcedpfx Adez Ekdloron

Condition: used, IKA EURO ST-D with 2 Paddles and H-Stand Reliable IKA EURO ST-D overhead stirrer, offered complete with 2 stirring paddles and an H-stand. Ideal for laboratory mixing applications that require stable and consistent stirring performance. The unit is supplied with all the essential accessories needed for immediate use. Included: Dcsdjzh Rhrspfx Adron IKA EURO ST-D overhead stirrer 2 stirring paddles H-stand Suitable for: General laboratory mixing Research and development Chemical and pharmaceutical lab work Condition: Used Availability: Ready for immediate delivery

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate Dcsdez I Dvyspfx Adrsn - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 with 5th spindle at the bottom Dcodpfx Aszvvuajdrsn Includes 5 planing heads.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Dcsdeutuyispfx Adren Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Dedpfxoyab I Uo Adrjcn

Year of construction: 2010, condition: ready for operation (used), A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating hours: approx. 75900h. Documentation available. An on-site inspection is possible. Available from approximately November 2026. Dedpfx Adjzqfwyjrocn

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Dcodpfx Ajwmdw Hjdrjn Wire grooves 8/12/15mm Price excluding VAT

Year of construction: 1995, condition: ready for operation (used), A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible. Dcedpowut Htjfx Adron

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine Dcedpfegrzh Eox Adren mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, input frequency: 50 Hz, empty load weight: 320 kg, overall weight: 320 kg, type of input current: three-phase, electrical fuse: 16 A, Dough divider and forming machine, Eberhardt Model: Optimat S Size 3 Portion range: 30 to 90 grams/piece Dough capacity: 900 to 2800g Roll former for small bread rolls with 3 forming plates Dcodpfezq Ux Tjx Adren Floor-standing machine, 30-part Dimensions approx.: 650 x 670 x 1490 mm WxDxH Connection: 400 V, 16A-CEE plug Used machine

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Djdoyw Svfopfx Adrecn

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Dcjdpfxew Rqwte Adron

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Delivery time: by arrangement Dcjdpfx Aev S H Rhodrjn Payment terms: 100% before taking delivery of the machine, net

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Dcsdpfszd Ehxjx Adrjn

Condition: good (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503729 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar equipment included Dsdpfx Adez Eahaerocn incl. Spruepicker screen text german CEE-socket 16A core pulling hydraulically 1x Anti vibration mounts mould heating 6x handling type: Linear manufacture: ARBURG controller: INTEGRAL PICKER year of construction: 2012 measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Dedpfxezhpg Tj Adrocn terms of payment: 100% prior to delivery

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Dcsdpfx Adoztn Eroren Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Djdpfxszl Enhj Adrocn

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Dodpoibyatjfx Adrecn Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Dcsdpfsr N Rh Hex Adron

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: Dodpozgup Rofx Adrocn bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 2550 mm Width: 1050 mm Height: 1200 mm

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Dedpfx Adsugmx Aerjcn

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Djdpfxeznx Hie Adrecn

Year of construction: 2014, condition: used, Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible. Djdjz Dkh Ispfx Adrjcn