Used Dunkes Hzs 25 for sale (21,542)

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. Kdjdpfxsz Eq Epo Ag Aeu ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: good (used), Year of construction: 2022, operating hours: 737 h, load capacity: 2,500 kg, fuel type: electric, empty load weight: 1,000 kg, mileage: 737 km, Electric pallet truck Brand: Still Year of manufacture: 2022 Only 737 operating hours Capacity: 2,500 kg Battery: 2022, equipped with an external charger and automatic filling system Watch the video on YouTube. Kodjz Eulyjpfx Ag Ajdu

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000021766, Intermac VERTMAX 2.6 – Vertical CNC Glass Processing Centre with LiSEC WTL-25 Vertical Glass Washing Machine Vertical Intermac VERTMAX 2.6 CNC glass processing centre equipped with one front working spindle and one rear spindle. The machine has a total capacity of 37 tools, with 18 positions in the front tool magazine and 19 positions in the rear tool magazine. The offer also includes a LiSEC WTL-25 vertical glass washing machine equipped with six brushes, pre-washing, washing and drying sections. The washer is fitted with soft brushes suitable for Low-E glass. Key Specifications of the CNC Centre: - Manufacturer: Intermac - Model: Vertmax 2.6 - Serial number: 1000021766 - Year of manufacture: 2018 - Total weight: 12,500 kg - Maximum glass size: 5,000 × 2,600 mm - Minimum glass size: 500 × 300 mm - Glass thickness: 4–26 mm - Total tool capacity: 37 - Front tool magazine: 18 tools - Rear tool magazine: 19 tools Vertical Glass Washing Machine: - Manufacturer: LiSEC GmbH Ksdpfx Asz Il Uqsg Aedu - Model: WTL-25 - Serial number: 311-057906 - Year of manufacture: 2010 - Maximum glass washing height: 2,500 mm - Minimum glass size: 350 × 180 mm - Glass thickness for washing: 3–15 mm - Transport speed: 4–8 m/min - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.

Condition: used, Year of construction: 2023, operating hours: 39 h, Putzmeister SP 25 DQR Mortar Machine and more, 39 operating hours, like new!! SP 25 DQR: High performance for versatile applications. In addition to classic interior and exterior plastering applications, the powerful SP 25 DQR screw pump with forced mixer is suitable for a variety of other special applications, such as concrete repairs or filling and grouting work. The focus of the increased performance is on larger processing volumes, as well as higher delivery rates and pressures. Multi-component materials and ready-mix dry mortars can be mixed on site in the powerful forced mixer with any desired mixing time. The lifting function of the mixer enables a low filling height and allows the easy transfer of the mixed batch into the feed hopper. Main features: * Robust design - proven in construction site use and on the test track * Large lifting mixer with a volume of 240 liters allows the mixing of larger quantities of material/containers * Lower filling height simplifies filling and cleaning of the mixer * Central control panel with intuitive keypad and clear display * Larger tank for maximum operating time without refueling * Support feet for the best stability on the construction site * Robust plastic hood according to the highest quality standard * Safe relocation of the machine with a crane - thanks to the integrated crane eye Description: High performance for versatile applications. In addition to classic interior and exterior plastering applications, the powerful screw pump with forced mixer is suitable for a variety of other special applications, such as concrete repairs or filling and grouting work. The focus of the increased performance is on larger processing volumes, as well as higher delivery rates and pressures. Multi-component materials and ready-mix dry mortars can be mixed on site in the powerful forced mixer with any desired mixing time. The lifting function of the mixer enables a low filling height and allows the easy transfer of the mixed batch into the feed hopper. Robust plastic hood according to the highest quality standard. Central control panel with intuitive keypad and clear display. Robust design - proven in construction site use and on the test track. Support feet for the best stability on the construction site. Safe relocation of the machine with a crane - thanks to the integrated crane eye. Large lifting mixer with a volume of 240 liters allows the mixing of larger quantities of material/containers. Lower filling height simplifies filling and cleaning of the mixer. Larger tank for maximum operating time without refueling. Technology with screw Fluid for mortar. Operation: Diesel-powered. Installation: Mobile. Application area: Industry. Application: Mixing. Protection level: Robust. Other features: Tank, construction site. Throughput: Max: 4.5 m³/h. Min: 0.3 m³/h. Pressure: 35 bar. Delivery height: 50 m, 70 m. Power: 28 kW. Length: 4,280 mm. Width: 1,410 mm. Height: 1,480 mm. Weight: 1,050 kg. Kdjdpfjz Hd Elex Ag Asu Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item prior to sale!

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,050 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,400 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, Equipment: 3rd hydraulic function, Load capacity: 2,500 kg Linde H 25 Diesel Mast type: Triplex with full free lift Year of manufacture: 2008 Operating hours: 5,050 Lift height approx. 4,700 mm Overall height approx. 2,200 mm 3rd valve Sideshift Heater Gross: €14,875 / Net: €12,500 Ksdpjz Hfryjfx Ag Asdu Looking for a different forklift or stacker? LPG, electric, or diesel? Contact us and we will find the right vehicle for you. Subject to errors and prior sale. Sale to professionals only, no warranty.

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDE Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Kdedpfxezv Emls Ag Aeu Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Kdsdpfez Ekchsx Ag Aeu Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,655 h, load capacity: 2,500 kg, lifting height: 5,190 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,375 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Kdsdpfx Aszt Du Asg Asu Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 620Ah Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light, joystick, rotating beacon.

Condition: new, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 6,120 mm, fork length: 1,200 mm, total length: 3,630 mm, - Typzeichen des Herstellers RX 60-25 - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 Kjdpfxsxd Hffo Ag Asdu - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Year of construction: 2013, condition: good (used), SICA-TRS-SY 25-160 R, PLANETARY TUBE SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 25mm Max diameter 160mm Year of construction 2005 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property. Kdodpjvn A R Nefx Ag Aou

Condition: new, Year of construction: 2023, machine/vehicle number: 23-04-35-001, F 25 Version 3 Manual height and swivel adjustment 0 - 46° of the saw blade with digital display. Motor 5.5 kW, 2 speeds 3,600 / 4,200 rpm. Double roller carriage 3200 mm, Parallel fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting length up to 3450 mm, Basic scoring unit with LED light Saw blade diameter max 315 mm, saw blade projection max. 104 mm, Cutting height max. 100 mm, at 45° max. 70 mm, Kedsf A Ehtopfx Ag Aedu Large dust extraction hood (PSV), incl. option for front support roller, immediately available from stock in Seevetal, subject to prior sale Ex works, excluding transport, assembly and instruction.

Condition: good (used), Year of construction: 2007, For sale full packing system, Kedpjk R T Uvjfx Ag Aedu Multihead ( 10 scales) Packing machine Conveyor for packaged products.

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec Kdedpfx Agetv Rlbe Aeu opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: like new (used), Handwheel for machines Diameter: 25 cm Kodedt Rt Sepfx Ag Ajdu Other dimensions, see images Plastic Several available

Condition: used, REMA double grinding wheel with dust extraction Grinding wheel diameter 250 mm Kdedpfx Agez D D Ibs Aou Rated power in kW: 0.75

Condition: good (used), Year of construction: 1997, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 740 kg, Manual Lisec butylextruder in good working order Kdsdpfoz Ag Siox Ag Aju 2 x 7,5 Kg butyl storage cylinder for application of profiles from 6 - 24 mm width

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Empty weight: 3.000 kg Price: On request - Documentation available: No Kjdpfez Avg Nsx Ag Asdu - CE certificate present: No - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X387Y01149, Year of construction: 2021, operating hours: 1,857 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,505 mm, fuel type: electric, mast type: triplex, construction height: 2,175 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,760 mm Free lift: 1,505 mm ISO class: 2 (1,000–2,500 kg) MACHINE DETAILS Mast type: Triplex Kdodpfoz Dw U Iex Ag Aeu Fuel type: Electric Battery voltage: 80 V Overall height: 2,175 mm EQUIPMENT Semi-cabin Side shifter 3rd valve

Condition: new, functionality: fully functional, machine/vehicle number: HHKHHF08CF0006644, Year of construction: 2022, operating hours: 4 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,527 mm, fuel type: gas, mast type: triplex, construction height: 2,175 mm, No minimum price – guaranteed sale to the highest bidder! For sale is a new gas-powered forklift with only 4 operating hours! Kdsdpfx Ajz Dxbisg Aju TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,700 mm Free lift: 1,527 mm ISO class: 2 (1,000–2,500 kg) MACHINE DETAILS Fuel type: Gas Mast type: Triplex Overall height: 2,175 mm EQUIPMENT Side shifter 3rd valve 4th valve

Condition: excellent (used), Furniture Carcasse (Case) through-feed Press Clamp "LIGMATECH" Mod. CabTeq T200 (MDE 120 / 25 / 08) - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - HOMAG powerTouch - Total installed power Kw 10 - Total length of the machine mm 6350 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2500 Kjdpfx Agsz D A Iyo Asdu - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 220 /1320 Motorized transport carpet (length mm 3000) Motorized transport carpet (length mm 3000)

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine Kodoz A R R Tspfx Ag Asdu -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Kedpfxsz D Taaj Ag Aedu Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: good (used), Year of construction: 2003, Bahmüller Double Champion 25/36, ref. 3050 Year 2003 Model DLN 25/36 SG Processes two-part or single-part blanks Kdedpfx Agjz Iltme Aju Max. width: 3600 mm Max. height: 2500 mm Stitching speed: 850 staples per minute Suitable for 5 and 7-layer applications Includes gluing unit Stacker currently available

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz delivery time: on request Kodpfx Aez Hfl Hog Ajdu terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Ksdpfoz Hlzhjx Ag Ajdu Nominal force: 12.5 kN Stroke: 100 mm Includes SCHMIDT PressControl 75 in the two-hand safety version Weight approx.: 45 kg 51026ä