Used Ebot 1000 Agv Pallet Transfer Stands for sale (23,772)

Condition: good (used), machine/vehicle number: 16362, Year of construction: 2020, operating hours: 2,816 h, load capacity: 1,600 kg, lifting height: 200 mm, load center: 600 mm, fuel type: electric, mast type: other, construction height: 1,005 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire size: , rear tire size: , overall weight: 493 kg, Wartung und UVV-Prüfung neu Fpodpfx Afsw R Dahoujn Batterieladegerät Serial Number: W42351X00998 Battery Details: 24 Volt Wartung und UVV-Prüfung neu Batterieladegerät

Condition: like new (used), Bought new in 2022 and only used for a few months before the factory went Bankrupt. As new condition. 1 year guarantee. Fedpfx Aoyivtqofuepn

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system Fpjdez Harzspfx Afuon outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, grinding diameter 1300 mm grinding length 6100 mm grinding wheel diameter 1300 mm voltage 400 V drive capacity - workpiece 23 kW centre distance 6500 mm max. dia. of grinding wheel 750 mm total power requirement 50 kW weight of the machine ca. 35 t 2 x Heavy Duty Steadies Coolant System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fjdpfx Afez Icxteuopn About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. Fpodpfx Aeyudxxefusn More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt Fpodjz H Ul Nopfx Afujn mobile 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable Fsdpfx Afez H Ummeuepn with outfeed belt mobile 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Fodpfx Ajfr Ih Dofuopn Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm Condition: Very good (used) Optionally with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Fjdpfsz Iadyjx Afujpn Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: Fedez Irr Aepfx Afujpn - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Eddy current non-ferrous metal separator type EIS 1000 S, supplied by Panizzolo (Italy), with Panizzolo vibrating feeder. For separating aluminium, copper and other non-ferrous metals from plastics, rubber, wood and inert materials. Technical data: – Type: EIS 1000 S – Belt width: 1,000 mm – Panizzolo vibrating feeder with OLI 1.1 kW vibration motor – Power supply: 3 × 400 V / 50 Hz Electrics: – Separate control cabinet with Schneider ClimaSys cooling unit – 2× Schneider Altivar Process frequency inverters (variable speed) – Control panel with touch display, main switch, emergency stop Scope of delivery: separator, Panizzolo vibrating feeder (OLI 1.1 kW vibration motor), control cabinet. By arrangement, an older non-working separator from the same supplier can be included as a source of spare parts. Condition: in working order, separator and feeder tested running. Fsdpfx Aez I Itcjfuepn Inspection and test run by appointment on site. Loading onto truck on site. Sold as is, price net plus VAT.

Condition: new, machine/vehicle number: 16048, Year of construction: 2024, load capacity: 1,200 kg, lifting height: 3,200 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 2,080 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 576 kg, enginetype: Lithium-ion, manufacturer: Bobcat Serial Number: OBWNL-002740 Fpsdpfx Afeykc Rrouen Battery Details: 24V 60Ah

Condition: used, machine/vehicle number: 11390, Year of construction: 2007, operating hours: 20,458 h, load capacity: 2,000 kg, lifting height: 1,750 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,480 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 886 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 91533054 Fedpeyiwlujfx Afuepn Battery Details: 24V BJ:2019

Condition: used, machine/vehicle number: 15776, Year of construction: 2017, operating hours: 3,441 h, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, mast type: other, construction height: 1,340 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 658 kg, enginetype: Electric, manufacturer: Jungheinrich Fedew R Ay Hopfx Afuepn Serial Number: 91620639 Battery Details: 24 Volt

Condition: used, machine/vehicle number: 10799, Year of construction: 2005, operating hours: 10,010 h, load capacity: 1,600 kg, lifting height: 5,200 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, battery voltage: 24 V, overall weight: 1,300 kg, enginetype: Electric, manufacturer: Jungheinrich Fsdpjw R Aczefx Afuopn Serial Number: 90139199 Battery Details: 24 Volt

Condition: good (used), machine/vehicle number: 15473, Year of construction: 2019, operating hours: 3,873 h, load capacity: 1,400 kg, lifting height: 2,430 mm, free lift: 1,250 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,210 kg, enginetype: Electric, manufacturer: Linde Serial Number: W41173V00441 Battery Details: 24V Fjdpfszfuz Djx Afujpn

Condition: good (used), machine/vehicle number: 16179, Year of construction: 2018, operating hours: 164 h, load capacity: 1,200 kg, lifting height: 3,030 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,950 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,137 kg, enginetype: Electric, manufacturer: Yale Serial Number: D852T04234S Fjdozffvrspfx Afuspn Battery Details: 24V 2PzS 250Ah

Condition: good (used), machine/vehicle number: 16180, Year of construction: 2021, operating hours: 110 h, load capacity: 1,600 kg, lifting height: 4,990 mm, free lift: 1,710 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,367 kg, enginetype: Electric, manufacturer: Yale Serial Number: D852T07637V Fpsdpszffvxefx Afusn Battery Details: 24V 3PzS 375Ah (aus 2021)

Condition: good (used), machine/vehicle number: 50264352686422, Year of construction: 2025, operating hours: 1 h, load capacity: 1,500 kg, lifting height: 200 mm, fuel type: electric, mast type: other, overall weight: 130 kg, enginetype: Electric, manufacturer: EP Equipment Fedpfozqb Hdox Afuepn

Condition: used, machine/vehicle number: 16841, Year of construction: 2016, operating hours: 5,842 h, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, mast type: simplex, battery voltage: 24 V, fork length: 1,190 mm, rear tire size: Tandem, overall weight: 864 kg, enginetype: Electric, manufacturer: Still Fjdpoygzd Njfx Afujpn Serial Number: F20179G00769 Battery Details: 24 Volt

Condition: used, Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Fpjdpfez I Awpsx Afujn Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

Condition: new, Year of construction: 2022, Schütz VET tank, steel, 1000 liters! NEW! For: Heating oil; diesel; biodiesel; RME; vegetable oil; lubricants; used oil Fpjdpfjz Izm Aex Afusn With pump and tap. Available for immediate pickup. Dimensions: W 76 cm x H 162 cm x D 114 cm Location: Nuremberg/Krottenbach Inspection appointment: by arrangement VAT: shown separately

Condition: used, Year of construction: 1989, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: Center-to-center distance: 1000 mm Max. workpiece diameter: 380 mm Motor: 0.9 kW – 240 V Accessories: 3-jaw chuck Faceplate Fsdpfx Afezyy D Hsuepn Various woodturning chisels

Condition: good (used), machine/vehicle number: 17206, Year of construction: 2019, operating hours: 2,656 h, load capacity: 2,000 kg, lifting height: 1,660 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,200 mm, overall weight: 1,190 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98240146 Battery Details: 24V 3 PzS 375Ah (BJ:2019) Fsdpfx Afszwa Rueuspn

Condition: good (used), machine/vehicle number: 17237, Year of construction: 2020, operating hours: 4,145 h, load capacity: 1,600 kg, lifting height: 3,990 mm, free lift: 1,400 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,840 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,388 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 90617350 Fpjdpfxszwa Nds Afusn Battery Details: 24V 2PzS 250Ah (BJ:2019)