Used Edelhoff Eccentric Press - Single Column for sale (22,646)

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW Psdpoy Nd Svofx Amxorb weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm Prsdpfxefx Hv Hj Amxob dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition Psdpfx Amsyath Tsxorb

Year of construction: 1986, condition: used, pressure 100 t throat 340 mm stroke 8-140 mm no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm Prjdpfx Aep Syczomxeb table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm Psdpjt Eix Rofx Amxsrb daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Psdpfxjzvnfdj Amxorb Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, Year of construction: 1990, pressure 75 t throat 290 mm stroke 12 - 100 mm ram adjustment 80 mm no. of strokes 140 Hub/min table surface area 830 x 560 mm Predst Ev T Ijpfx Amxeb ram surface 630 x 300 mm total power requirement kW weight of the machine ca. 6,1 t dimensions of the machine ca. m

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm Pedpfxsykb Dqe Amxorb ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min Prjdpfx Astqm Dqjmxob table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter Prsdjw D Awmjpfx Amxjb *

Condition: used, Year of construction: 1983, pressure 25 t throat 225 mm stroke 8 - 85 mm table size 560 x 450 mm ram head dimension 360 x 220 mm ram adjustment 55 mm no. of strokes 80 - 160 Hub/min Pjdpfx Aoumm Swemxorb total power requirement kW weight of the machine ca. 2500 kg dimensions of the machine ca. 1,135 x 1,365 x 2,145 m

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min dayligth 195 mm Prodjztf Anjpfx Amxjb total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW Psdpfx Aotycdkomxorb weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram Pedsvbk Rwspfx Amxorb - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm Prsdpfoztfz Rox Amxob stroke - stepless adjustable 30-140 mm ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Year of construction: 1986, pressure 40 t throat 265 mm stroke 8 - 95 mm table size 660 x 520 mm Prodpfxsumm Sqj Amxeb ram head dimension 400 x250 mm ram adjustment 80 mm no. of strokes 70 - 142 Hub/min total power requirement kW weight of the machine ca. 4500 kg dimensions of the machine ca. 1,245 x 1,585 x 2,37 m

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Prsdpez D Hzdsfx Amxsb

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm Prsdpfxocxxygj Amxeb no. of strokes:180 Hub/min table surface area:400 x 340 mm table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,2 x 1,5 x 2,0 m

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm Psdsuild Aopfx Amxorb weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible Pedpfou N Dfhjx Amxerb - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. Prjdpfx Aju Nfhdemxeb *

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL Prjdpfxotx E N To Amxob - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t Prsdpfx Amefn Aqnexeb dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm Psdpfx Aozrpqgomxjrb power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion Prsdpfstqm Dhex Amxjb - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"