Used Emag Vl 8 for sale (38,181)

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear Lhsdpex Suzaefx Amzon * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS X-axis travel: max. 840 mm Z-axis travel: max. 425 mm Feed diameter: max. 200 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS Lhodpfx Amjyap Naezjn High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, year of last overhaul: 2023, Offered is a VSC 250 vertical turning center, which has been mechanically and electrically overhauled by EMAG. The control system was upgrated to Siemens Sinumerik One. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW Lhedpjrq Damjfx Amzon TOOL CARRIER EMAG wheel turret, 12x VDI 40 Delivery time and additional equipment of the machine on request.

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. Lhjdpfxohq Uklj Amzon 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Lodpfxot Hxa Ts Amzehn Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Modular milling cutter Module 8 Lhjdpfx Aodklt Nsmzon 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 3/25 rpm -Power: 0.07/0.55 kW -Brake -Design: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 38 kg Ledpfx Ajb A Itwjmzshn

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 1,800 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: electric, mast type: triplex, construction height: 2,395 mm, fork length: 1,150 mm, empty load weight: 3,283 kg, drive type: Elektro, construction width: 1,076 mm, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tire type: Solid rubber Front tire size: 200/50-10 Front tire condition: NEW Rear tire type: Solid rubber Rear tire size: 140/55 Ljdpfxjz Dyf Ne Amzshn Rear tire condition: NEW Battery voltage: 80V Battery condition: NEW Load guard, side shifter, 3rd valve, 4th valve, roof protection, half-cab, load guard, full free lift, CE certificate, safety light, Image may serve as a symbolic representation.

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 1,800 kg, lifting height: 4,350 mm, free lift: 1,375 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,150 mm, empty load weight: 3,283 kg, drive type: Elektro, construction width: 1,076 mm, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tire type: Solid rubber Front tire size: 18*7-8 Front tire condition: NEW Rear tire type: Solid rubber Rear tire size: 140/55 Rear tire condition: NEW Battery voltage: 80V Lodpfxjzy S Abs Amzjhn Battery condition: NEW Load backrest, side shifter, 3rd valve, 4th valve, roof protection, semi-cab, load backrest, full free lift, CE certificate, safety light, Image may be used as a symbolic representation.

Condition: excellent (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 1068, overall weight: 270 kg, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: type plate available, Kaeser Airtower 8 Screw Compressor (5.5 kW, 700 l/min) with Refrigeration Dryer /ct2499a/ Kaeser Airtower 8 screw compressor with refrigeration dryer for sale; serviced from new and in excellent condition. Manufacturer: Kaeser Airtower 8 + TU11 refrigeration dryer Lsdez Er A Aspfx Amzehn Serial number: 1068 Year of manufacture: 2000 Operating hours: 47,000 h Power: 5.5 kW Air delivery: 700 l/min (42 m³/h) Pressure: 10 bar Motor speed: 3000 rpm Rated voltage: 400 V, 3-phase, 50 Hz Rated current: 12 A Pipe connection: 3/4 inch Includes Kaeser automatic condensate drain and filter Overall dimensions: Length: 675 mm Width: 625 mm Height: 1285 mm Weight: 270 kg

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible. Lhjdszl Emkjpfx Amzsn

Year of construction: 2004, condition: ready for operation (used), A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible. Lhsdpfx Aszl Enbjmzjn

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Lhjdpfxezfp Hho Amzen

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, color: silver, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full equipment details available on request. - Leading axle, electro-hydraulically steered - Rear air suspension, tridem, 2 driven axles - Globetrotter XL safety cab (FH) - Wheelbase: 3,900 mm Lhedpfx Ameyhkqhjzon - Euro 6 emissions standard, with SCR, particulate filter, and exhaust gas recirculation - Diesel engine 12.8 l, 551 hp / 405 kW, 2,652 Nm - Engine brake exhaust pressure regulator (incl. engine control for I-Shift) - I-Shift AT2612, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm - Two additional crawler gears, slow & ultra-slow - Two additional reverse crawler gears - Liftable axle - Drive axle RTH2610B, tandem axle hub reduction, 4 planetary gears - Longitudinal and cross differential locks - Drive axle ratio 3.46 : 1 - Automatic climate control with sun sensor, fog sensor, air quality sensor, and activated carbon filter - Front axle air suspension - Rear air suspension - AdBlue tank, usable volume 90 liters, height 710 mm - Front axle tires 385/55R22.5 - Rear axle tires 315/70R22.5 - Rear-lift axle tires 385/55R22.5 - Transmission/I-Shift control via unit at driver's seat - I-Shift drive modes: Standard, Performance, and Economy - PTO PTER-DIN, engine mounted, prepared for pump according to DIN 5462 - Electronic Stability Program (ESP) - Radio: AM/FM and DAB/DAB+ (analog & digital) - Reversing surveillance/camera - Second driver information display, 9-inch color touch display - Robust leather trim: leather seat (beige/raven) with matching grey vinyl interior - Comfort driver's seat, air-suspended, heated, seat belt integrated in seat, Millennium Silver metallic - LED main headlights with adaptive high beam - LED daytime running lights, V-shaped LED fog lights, front - Heavy-duty fifth wheel Jost JSK 38-C, king pin 3.5 inch (90 mm) - 1. Custom feature: I PARK COOL stationary air conditioning - 2. Custom feature: Ride height control switch in cab - 3. Custom feature: Reinforced spring actuators - 4. Custom feature: PCA 20025 custom fuel tank 860 L behind cab - 5. Custom feature: AA ratio 3.33, CAPQ-25000817-01 - Conversion kit for 2 inch king pin - heavy haulage with GCW greater than 100 tonnes - additional side with vertical exhaust for EASP1/EASP5 - CB radio next to TCO with hands-free system, Stabo/Albrecht - Compressed air gun mounted on left of driver's seat - Jumbo - Globetrotter roof sign lighting - 7-liter water tank in side storage compartment - NATO socket on bar above switch - Lightfix bar with 4 LED headlights, including 2 x rotating beacons

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Lhodpjzl N Apjfx Amzsn Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Year of construction: 2011, Vertical Twin-Spindle Turning Center - Siemens 840 D CNC control - VSC 400 Duo machine bed - 2 x disc turrets, 12 station, dia. 40 mm, driven - 2 x additional drilling and countersinking stations - Open workpiece transport system - Transfer and turning unit - Interface for an external handling system - Central high-pressure coolant supply with pump, 70 bar - Air blow-off for pick-up unit and clamping devices - Workpiece measurement system - Tool monitoring - Emag network option - Sister tool management system Swing diameter: 260 mm X travel: 860 mm Z travel: 200 mm Main spindles: 2 Lodpfjy N Snxex Amzehn Max spindle speed: up to 4,500 rpm Spindle distance: 1,055 mm Main drive: 2 AC asynchronous motor 60% / 100% duty cycle: 39 / 28 kW Max torque: 460 Nm Rapid traverse (X / Z): 45 / 30 m/min

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, professional portioner with rotary table and hanging section. I have many spare and wear parts for the device, such as funnels, seals, brakes, etc. Lhjdpfow Emc Ajx Amzon

Condition: used, Hotrunner controlunit PSG 8 8 units 230 Volt Lodpjwgb Ngefx Amzehn price: 2.250 € contact: Mr. Rainer Eckerle

Condition: used, Veeco Dektak 8 Lhsdpfx Amswr A Smezsn Working condition and calibrated

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Ljdpjud H Sdsfx Amzshn Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. * Lsdpfx Ameixxqkjzjhn

Year of construction: 2016, condition: defective spare-parts repository (used), Offered is a VTC 250 shaft turning machine, which has four axes. Two turrets with eleven tool places each are installed in the machine. Lhjdok Rumqepfx Amzjn The machines were decommissioned several years ago and subsequently put into storage. As you can see in the pictures, the VTC will be sold in untested condition as spare parts carrier. The control system of the VTC 250 is no longer present in the machine. Other accessories such as chip conveyors, coolant systems or workpiece transport systems are not part of the advertisement. TECHNICAL DATA workpiece diameter: max. 100 mm workpiece height: max. 630 mm TOOL CARRIER 2x EMAG turret, each equipped with 11x VDI 40 without driven tools + 1x gripper Price and delivery time of the machine after arrangement.

Condition: ready for operation (used), mvl QLN65/0012 A14-3038L-63 cross-flow fan unit 220/230V 50/60Hz SN:36118 ,used, normal traces of use, 100% functional, scope of delivery according to photos Lsdol Eciuspfx Amzjhn

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: Lhodpfx Amou Nhiqjzen - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: refurbished (used), Year of construction: 2021, HANDTMANN PVLH-228 2021 year The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. New funnels and brake. Delivery time: 3 weeks. natural or artificial intestine kit to be agreed Lsdpfx Amjrf S U Dezohn