Used F. Zimmermann Fz 33 for sale (36,203)

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Deutz F4M 2011, General information Field of application: Construction Weights Empty weight: 1.550 kg Functional Generator capacity: 33 kVA CE mark: yes Fsdpet Hc Hkjfx Ad Nspg Other information Fuel consumption: 225 g/ kWh Generator: Mecc alte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy, Road registration Water tank volume: 175 l Transport dimensions (LxWxH): 2,4x1,2x1,75 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Road registration - Steel canopy - Tank

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 tool holder - The machine is currently idle. - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. Fodpfx Adsywpa Io Nopg The machine can be inspected under power at any time.

Condition: defective spare-parts repository (used), Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 2,800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 2,700 mm, feed length Y-axis: 520 mm, feed length Z-axis: 630 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 810, total height: 2,800 mm, total length: 4,450 mm, total width: 2,850 mm, table width: 520 mm, table length: 1,200 mm, rotational speed (max.): 10,500 rpm, overall weight: 12,100 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 36,000 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, We are offering this used Chiron FZ 28 L vertical machining center, year of manufacture 1996. Model: FZ 28 L Serial number: 137-28 Year of manufacture: 1996 Weight: 12,100 kg Number of driven axes: 3 X-axis: 2800 mm Y-axis: 520 mm Z-axis: 630 mm Table clamping surface: 1200 x 520 mm (two machine tables installed) Spindle speed: 0 - 10,500 rpm Power output: 36 kW Tool holder: SK50 Tool changer for 40 tools Automatic tool changer Feed / Rapid traverse: X 40 m/min - Y/Z 30 m/min Coolant system: available Chip conveyor: available Hydraulic clamping system: available Note: Fjdpfsyvg Aksx Ad Nspg The machine has a technical defect on the Z-axis (further information on request). The machine is being sold in its current condition. Dismantling, collection and loading are to be carried out by the buyer. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), mileage: 472,000 km, power: 268 kW (364.38 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, total length: 8,400 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2001, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, retarder, = Additional Options and Equipment = - Leaf suspension - Differential lock - Air-suspended seats - Air horn - Radio/CD player - Beacon light - Sun visor Fodpfxoytwmgo Ad Njpg - Power take-off (PTO) = Additional Information = Transmission: ZF, manual gearbox Suspension: leaf spring suspension Front axle: steerable; Tire tread left: 80%; Tire tread right: 40% Rear axle 1: dual tires; differential lock; Tire tread left inside: 30%; Tire tread left outside: 30%; Tire tread right inside: 30%; Tire tread right outside: 30%; reduction: planetary axles (external) Rear axle 2: dual tires; differential lock; Tire tread left inside: 30%; Tire tread left outside: 30%; Tire tread right inside: 30%; Tire tread right outside: 30%; reduction: planetary axles (external) Number of cylinders: 6 GVW: 33,000 kg Technical condition: good Contact Andre, Henri, or Andre for more information.

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 Fsdpfx Adsn D D Nhs Nepg 2 UNITS AVAILABLE

Condition: used, turning diameter over bed . mm turning diameter over slide rest 100 mm Fpsdpfx Aeyqu S Uod Neg turning length . mm swing diameter 200 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, weight max. 1600 kg Drive Diesel motor Deutz weight 13,6 t Optionally, spare parts can be purchased. No.: Zch5FZ Machine number 16087001 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Fedpfx Adjyqt Nxo Nepg Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 Fpedpfx Adoypb Tpo Njg • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s Fpodex Nr I Espfx Ad Njg The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Once the machining processes are complete, they are removed again. The robots then transfer the components to a transfer system, which transports them to the downstream cleaning system. The integrated washing line ensures reliable cleaning of the components in accordance with the defined cleanliness specifications. After the washing process, two synchronously operating Fanuc robots take over the cleaned parts in the rear section of the system. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 29,801 h, travel distance X-axis: 729 mm, travel distance Y-axis: 401 mm, travel distance Z-axis: 361 mm, controller manufacturer: FANUC, controller model: Series 31i, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Fedpex D Nmlefx Ad Nspg • Availability: available from 1/7/25 • Operating voltage: 400 v • Control voltage: 230/23 v • Material processed in the machine: aluminum • Cone type : hsk-63 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools per spindle: 48 • Tool holder: hsk-a 63 • Main spindle max. Torque: 95 nm Extra Information Fpedpfxox D Nl Uj Ad Nog Machine still under power

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, spindle speed (max.): 10,000 rpm, spindle motor power: 95,000 W, number of axes: 2, This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Control voltage: 230v / 24v • Power supply: 3x 400v, 50/60 hz • Rated power: 16 kva • Rated current: 34a • Rapid traverse (xyz): up to 40 m/min • Table size: 660 x 350 mm • Tool magazine: 12 positions Fpedpfxex D Ryae Ad Neg • Tool changeover time: approx. 2 seconds Extra Information When milling with an 80 mm diameter cutter, slight noise was audible in the spindle area.

Condition: ready for operation (used), Year of construction: 1993, controller manufacturer: SIEMENS, controller model: Sinumerik, This 4-axis CHIRON FZ 18 W was manufactured in 1993. It features dual 4th axes and is equipped with a SIEMENS SINUMERIK control system, enhancing its precision and efficiency. The addition of a chip conveyor aids in maintaining a clean work environment. Consider the opportunity to buy this CHIRON FZ 18 W vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Fjdpfx Adsyaadus Nspg • Axes: 4 with 2x 4th axis

Condition: good (used), Year of construction: 2007, functionality: fully functional, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul in 2017 Operating hours approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115°, water-cooled motor spindle, 15,000 rpm. Axes travel X 450mm / Y 270mm / Z 310mm Rapid traverse in X / Y / Z: 75 m/min. / Acceleration: X 1g / Y 1.5g / Z 2g 40 tool stations HSK-A 40, chip-to-chip time 2.6 sec. (vertical, to DIN standard) Additional equipment: Preparation for bar machining Rotary table package AWU 160 with D105mm (positioning axis), Hainbuch Spanntop collet chuck D100, additional equipment for 6th side machining Part removal handling and discharge unit for finished parts, bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine prep for high-pressure ICS 70 bar (vario-valve), fixture flushing Scraper-belt chip conveyor with discharge height 1050 mm, vacuum rotation filter VRF 400 ltr., manufacturer KNOLL MAHLE dual change-over filter Electrical cabinet cooler, signal light Tool life monitoring, tool breakage control, Single F500 3D probing system, Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) HSK-A40 tool holders Spare parts for this machine type including special operating materials Fpedjypbmcjpfx Ad Njg Note on machine concept: Unmanned complete machining 24/7 of cubic components. Material supply via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of 4 surrounding faces via vertical milling spindle. Machining of the end face (5th side) horizontally with swivel head. Clamping of workpiece via clamping stock, separating workpiece and 180-degree rotation, machining of the 6th side again horizontally with swivel head. Removal handling and discharge unit into parts buffer. Note on machine condition: The machine was factory overhauled and technically updated in 2017 by Chiron (CMS). The last spindle replacement was carried out in September 2025. The last manufacturer service was in October 2025 (major annual maintenance, 4,000 h). From new until today, the machine has been continuously maintained, repaired, and kept up-to-date by the manufacturer through a full-service contract (preventive maintenance).

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Laska FZ 225 Emulsifier / Inline Cutter Brand: Maschinenfabrik LASKA Gesellschaft m.b.H. Model: FZ 225 Year of manufacture: 2010 Machine number: 13287 Voltage and frequency: 3 x 400 V / 50 Hz Power: 132 kW Current: 230 A Protection rating: IP 55 Fpjdpfx Adeyr S Ipo Nsg The Laska FZ 225 emulsifier is a high-performance machine designed for the continuous production of finely processed meat fillings as well as emulsions from skins and fat. Thanks to a powerful 132 kW motor, the unit delivers excellent emulsifying results while maintaining high throughput, making it an ideal solution for large-scale industrial lines. The robust Austrian construction and IP 55 protection class ensure reliable operation in demanding plant conditions and facilitate easy maintenance of hygiene.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Fpsdpfeyq Nyyox Ad Nsg Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: excellent (used), Siemens 840 D, 48 tool stations HSK-A 50, spindle speed 15,000 rpm, workpiece changer, Knoll coolant system with internal coolant supply (IKZ), Thermodrive, mineral cast bed, automatic loading doors, central lubrication, additional extraction system for plastic chips, Fsdpfex D Up Sox Ad Nspg

Condition: ready for operation (used), Year of construction: 2007, A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible. Fjdeyn Nz Ejpfx Ad Nspg

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 Fpodjyma Nwopfx Ad Neg max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: used, maximum load weight: 30,580 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space volume: 33 m³, Equipment: ABS, Langendorf Tipper Trailer SKA Chassis: Steel Body: Aluminium Load volume: 33 m³ Fedpfoyqdkyex Ad Nepg 3 axles, SAF axles, disc brakes, air suspension with one lift axle, standing platform, rolling tarpaulin, grain discharge slide, aluminium rims, ABS. Payload: 30,580 kg Unladen weight: 5,420 kg

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Fpjdpfex I T Tasx Ad Njg Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH Truck Chassis – New Vehicle with Day Registration, 33t version, 6x4 drive, wheelbase 3.60 m, 520 HP, fitted with PTO auxiliary drive, air conditioning, parking heater, trailer coupling with 50 mm pin, manufacturer's warranty, and much more. MAN manufacturer’s warranty until 16.12.2026 MAN ATS warranty until 16.12.2027 Trade tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permissible total vertical load, technical plus Mileage approx. 1,335 km (transfer mileage) Medium-high body design Short NN cab Diesel engine with 382 kW (520 HP) output and 2,650 Nm torque Fjdpfjx I T Tgox Ad Nspg 6x4 drive Wheelbase 3,600 mm, 800 mm rear frame overhang Differential locks on rear axles Automatic transmission MAN TipMatic 12.28 OD Gear-dependent PTO, Type NTX/10c, without flange, ratio f=1.15, approx. 3:30 position High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging mode Transmission function MAN Idle Speed Driving Transmission for increased traction in driving operation MAN TipMatic Performance and Efficiency driving mode, up to 70,000 kg MAN TipMatic Offroad driving mode, up to 70,000 kg MAN TipMatic Manoeuvre program (shunting mode) MAN EasyStart hill hold assist MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Attention warning MAN AttentionGuard ABS Offroad with additional terrain logic EBS, ASR, ESP Front axle with leaf springs, rear axles air-suspended Front axle 9,000 kg, rear axle 13,000 kg Front axle suspension capacity 9,500 kg Stabilizers and shock absorbers on front and rear axles Axle ratio i=4.00 ROCKINGER Type 500 G 6B towing jaw for trailer loads up to 24,000 kg – technical plus Permissible gross combination weight 44,000 kg – technical plus Climatronic (automatic climate control) 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind the cab roof 2 rotating beacons on the cab roof Daytime running lights LED LED rear and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl panel, 4 functions, operable from outside with door open Driver comfort seat air-suspended and heated Comfort seat covers Smartphone integration MAN SoundSystem Advanced MAN MediaSystem Advanced navigation 7 inch New vehicle with day registration and MAN manufacturer’s warranty Net price plus 19% VAT. Attractive financing offers available on request. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2571

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Fodpfoquhbgox Ad Njpg Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, Year of construction: 2004, functionality: fully functional, tool weight: 7,820,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used CHIRON FZ 15 S / W vertical machining center, year of manufacture 2004. Manufacturer: CHIRON Model: FZ 15 S / W Year of manufacture: 2004 Condition: used Fedpfx Adjykt Rco Nspg Category ID: 1281 Type ID: 4156 Machine type: vertical machining center If you have any questions or require additional information, please feel free to send us a message or call us.

Condition: repair required (used), Year of construction: 1988, operating hours: 25,656 h, functionality: limited functionality, overall weight: 5,000 kg, We are offering this Chiron FZ 22 W with pallet changer, year 1988, in need of repair (display defective). Fedpfx Aoykrmpod Nopg