Used F. Zimmermann Fz 33 Compact for sale (39,361)

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Bjdpszbib Sofx Afwjdg Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 tool holder - The machine is currently idle. - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. Bdodpfjywpa Iox Afwog The machine can be inspected under power at any time.

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Bdodslvu Ruepfx Afweg

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011) Bdodpfx Afjzvyaaswog Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 21i-M, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis CHIRON FZ 08 W was manufactured in 2001. It features a maximum spindle speed of 18,000 rpm and a robust tool interface with HSK-A40. The machine includes integrated pallet changer for efficient workpiece handling. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08 W vertical machining centre we have for sale. Contact us for further details regarding this machine. • Condition: Machine is no longer functional and can only be used as a supplier of spare partsElectrical data • Kind of current: 3/N/PE ~ 50/60 Hz • Working voltage: 400 V • Control voltage: 230/24 V • Rating: 12 kVA • Rated current: 17 A • Fuse: 20 ASpindle Bsdpfxezvu R Te Afwjdg • Spindle type: Water-cooled motor spindle • Max. torque: approx. 15 NmOther machine details • Workpiece changing system: Integrated pallet changer (W-type) • Maintenance intervals noted: 8h, 50h, 200h, 500h, 2000h, 6000h • Lubrication requirements: INSK K11 / ALKANIA 2 (Shell)

Condition: used, Year of construction: 2009, - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Bedpfx Afjzuyhzewsdg Edge banding machine Manufacturer: Homag Type: KAL 330/6/A3/S2 Year of manufacture: 2009 Technical data - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), functionality: fully functional, Very nice Morgana AutoCreaser Pro 33 with Morgana Autofold Pro. Morgana Autofold Pro Maximum sheet size 35.4" x 19.6" Minimum sheet size 8.2" x 5.5" Maximum paper thickness 0.015" (approx. 150lb cover)*, including laminated material Minimum paper thickness 0.004" (approx. 20lb bond)* Maximum number of folds per sheet: 2 Maximum number of programmed applications: Unlimited alphanumeric Speed per hour (A4 in half): 6240 sheets per hour Morgana Autocreaser Pro 33. Feeding System: Bottom suction feed Max. Sheet Size: 700mm x 330mm (27.5” x 12.6”) Min. Sheet Size (in automatic mode): 210mm x 140mm (8.5” x 5.5”) Max. Paper Thickness: 0.4mm (varies according to hardness, type of fold, and substrate) Max. No. Creases per Sheet: 16 Min. Distance Between Creases: 0.1mm Max. No. Stored Programs: Unlimited Min. Crease Distance from Leading Edge: 2.5mm Min. Crease Distance from Tail Edge: 35mm In Hand Feed Mode, up to 2499.9mm to the last crease can be programmed. Speed per Hour (A4 in half): 8500 Speed per Hour (A5 in half): 11000 You are welcome to test this machine with us. We can arrange transport/packaging and load it into a truck or container. Please ask for a price including transport (location: the Netherlands). If you would like to purchase this machine now, please send your company details and your VAT number. We will then send you a proforma invoice. Bedszd D D Sspfx Afwsdg Regards, Henk Hoos.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Bdsdpfjxwmvksx Afweg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ Bedpfx Afexxivcswjdg # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: Bdodpfx Aoxw Uplefwsg # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll Bdjdpfxsxxi Rme Afwsg - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: used, power: 109 kW (148.20 HP), Year of construction: 2007, operating hours: 7,455 h, Equipment: all wheel drive, cabin, * Deutz TTV 1145 Kommunal mit Rückfahreinrichung + Drehsitz * 7455 Betriebsstunden * 50 km/H Ausführung * Fronthydraulik * Frontzapfwelle * gefederte Vorderachse * Kommunalanbauplatte * 7 x hydr Anschlüsse vorne * Druckluftanschlüsse 1 und 2 Kreis * 2 x Rundumlicht * Arbeitsbeleuchtung vorne und hinten * EHR * Zapfwelle 540/1000 * Ausstellfenster vorne und hinten * 11 x hydr Anschlüsse hinten * Oberlenker hinten * Schlitten für höhenverstellbare AHK * Reifen 480/70R28 BKT ca. 90% * 580/70R38 BKT ca. 90% * deutsches Fahrzeug * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. Bdjdpfjy Ab I Uox Afwog * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, turning diameter over bed . mm turning diameter over slide rest 100 mm turning length . mm swing diameter 200 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Bjdpfx Aeyqu S Usfwodg We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Bsdjrgqu Hopfx Afwsdg Machine can be inspected any time under power

Condition: like new (used), Year of construction: 2016, load capacity: 240 kg, arm reach: 3,330 mm, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: KR240 R3330 TECHNICAL SPECIFICATIONS PAYLOAD: 240 kg Bedpozvyq Esfx Afwjdg REACH: 3330 mm CONTROLLER: KRC4 DELIVERY FROM GERMANY WAREHOUSE

Condition: like new (used), Offer consists of: A patented folding and stapling system ensures precise staple positioning • Processing capacity: up to 25 sheets at 80 gsm paper weight • Supported paper formats: • Minimum: 105 × 210 mm • Maximum: 325 × 450 mm • Standard processing with flat or loop staples possible • Up to four stapling heads can be used simultaneously at four different positions • Equipped with both lateral and vertical jogging functions • Conveyor belt with roller guide ensures consistent, trouble-free paper transport • Adjustable clinchers provide neatly aligned, flat staples • Integrated sensors detect malfunctions early and reduce waste • Before front trimming, the booklet is pressed to achieve a clear and sharp fold • The front trim is made precisely parallel to the fold line of the booklet • Built-in, adjustable shingle delivery for orderly stacking of finished products Bedpfeyl Syxsx Afwedg

Condition: used, minimum range for wine: 15,000 litres/hour Bdedpfx Ajzx Dquofwsg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 76,130 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 5,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, number of axes: 5, This 5-axis CHIRON FZ 15FX was manufactured in 2002. It features a spindle speed of 12,000 rpm and a 48-station tool magazine for efficient operation. The machine is equipped with a Peiseler rotary table and an internal through-spindle cooling system, ensuring optimal performance. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15FX vertical machining centre we have for sale. Contact us for further details. Bsdpfxezgf Tte Afwodg - Kinematics: 5-axis (3+2 axes configuration)- A axis range is between A -100 -> +90- Table System: Peiseler rotary table equipped with LANG clamping system- Cooling System: Internal through-spindle cooling system- Chip Management: Chip conveyor- Workpiece Measuring: Renishaw probe- Manual Operation: Operator's handwheel- Working Voltage: 400 V- Control Voltage: 230/24 V- Frequency: 50/60 Hz- Current Type: 3/N/PE ~- Rated Current: 67 A- Rating/Power: 47 kVA- Fuse Protection: 80 A Technical Specification Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2010, total length: 2,035 mm, total width: 1,035 mm, total height: 1,015 mm, overall weight: 400 kg, For Sale: Conveyor table from Köning Brand: König Type: Conveyor table 800 mm Belt width: 800 mm Conveyor height: 850 mm max Bodpfxezvfh As Afwedg Year of manufacture: 2010 It is possible to view this machine on site. If you have any questions, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Bdsdpfx Asyxn Hcjfwjg

Condition: used, Year of construction: 2003, General technical data: Machine type: Flexographic printing press Web width: 330 mm Number of colors: 6 Bdodpfx Aeyn Scfjfwjg Equipment & Configuration: • Turning bar • 2 die-cut stations • 2-shaft rewinder • 6 UV IVT lamps • Video camera system • 3 sets of cylinders • 6 anilox rollers • 3 magnetic cylinders

Condition: excellent (used), Year of construction: 2001, drilling depth: 700 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 6,000 rpm, drill diameter: 40 mm, table length: 1,500 mm, table width: 1,250 mm, table load: 10,000 kg, Year of manufacture: 2001 Control: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Bdjdpfxexu Dkgo Afwsg Z: 1600 mm W: 500 mm Table: 1500*1250 mm, 10T B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor with coolant system Tool holder: SK50 Tool changer: 20 positions

Condition: used, Year of construction: 2000, x-travel 6000 mm y-travel 1600 mm z-travel 1300 mm control FIDIA C20 /4H-SB Bodpfx Aoxmaqyjfwedg tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: used, weight max. in kg 7-25 t Bdodpsm Hfczjfx Afwsg Gripping range 300 - 1.300 Suspension /

Condition: used, Mitsubishi FCA335L22-1 CNC Control System – Complete Unit For sale is a used Mitsubishi CNC control system, model FCA335L22-1, removed from an industrial machine. The unit is offered exactly as shown in the pictures. Technical Details Manufacturer: Mitsubishi Electric Model: FCA335L22-1 Serial Number: M3ZR422039Z Date Code / Year: 1992 Made in Japan Included Modules MC712 Bsdpsy Uminsfx Afwjdg MC116 MC446-1 MC724-1 Multiple MC323 cards Integrated floppy disk drive Various interface and communication boards Condition Used condition Removed from industrial environment Visible signs of use, dust, and storage wear Untested / functionality unknown Sold strictly as spare parts, repair unit, or for refurbishment Scope of Delivery Exactly as shown in the photos No additional software, cables, or documentation included Suitable for: Machine retrofit projects Spare parts replacement Repair and maintenance of older Mitsubishi CNC systems